Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [841 - 860 of 2472]

Warzelnia

Niemcy

2016

używany

na żądanie

INNO28089

A complete brewhouse including fermentation is available. Production capacity: 500l/h, space requirement X/Y: 8000mm/2000mm. 1) Brew mill, volume: 500l. 2) Mash kettle with steam or hot water, material: stainless steel, insulation: V2A. 3) Wort kettle and lauter tun with steam or hot water, material inside/outside: stainless steel/copper, without external boiler. 4) Whirlpool, material: stainless steel. 5) 2-stage plate cooler, insulation: V2A. 6) 6x cylindroconical fermentation tanks (ZKGs), volume: 1200 l, with jacket cooling. 7) Hot water generator. 8) Refrigeration system. Production capacity: 500l per 8 hours. The brewhouse is brand new and unused, but 8 years old. The brewhouse needs to be piped. Documentation available. On-site inspection is possible.

Frezarka CNC

Geiss FZ 2000x1000

Niemcy

2007

używany

na żądanie

INNO28088

A Geiss CNC 5-axis lathe is available. Connected load: 22.62kW, travel X/Y/Z: 2400mm/1400mm/760mm, B-axis: 210°, C-axis: 520°, rapid traverse X/Y/Z: 75m/min, 75m/min, 70m/min, rapid traverse B-/C-axis: 20880°/min. Speed: 40000rpm, tool holder: HSK-32 E, spindle power: 9kW, tool positions: 12, weight: approx. 35000kg, control: Siemens 840DI. Including center partition for two-station operation, Busch 110m³/h vacuum pump, Rittal SK 3320 cooling unit, measuring probe and knee switch for the vacuum. Documentation available. On-site inspection is possible.

Maszyna do cięcia strumieniem wody CNC

Stako Trium WPC

Niemcy

2016

używany

na żądanie

INNO28087

Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible.

Jednostka ekstrakcyjna

Esta Mobex P-36

Niemcy

2014

używany

na żądanie

INNO28084

Air volume flow: 4500m³/h, max. negative pressure: 3400Pa, motor power: 4kW, filter area: 42m², number of filters: 3, machine dimensions X/Y/Z: approx. 2050mm/1050mm/2050mm, weight: approx. 350kg. Documentation available. On-site inspection is possible.

Podwójna piła ukośna

Omga V 2013 NC

Niemcy

2003

używany

na żądanie

INNO28083

An NC mitre saw Omga S.p.A. is available. Speed: 3000 rpm, saw blade diameter: 300 mm, saw blade bore: 30 mm, max. cutting height: 60 mm, max. cutting width: 60 mm, max. feed: 1250 mm, angle adjustment: 45°/30°/22.5°, machine dimensions X/Y: approx. 5600 mm/1250 mm. Documentation available. On-site inspection is possible.

Roboty

Kuka KR210-2 2000

Niemcy

2007

używany

na żądanie

INNO28082

Robot: Applications: Welding/processing/handling/palletizing, mounting: floor, payload: 210kg, axes: 6, max. reach: 2700mm, repeat accuracy: +/-0.06mm, weight: approx. 1250kg. Electric motor: SEW-Eurodrive DV 132ML8/4BM, power: 5.5kW, speed: 1400rpm, weight: approx. 100kg. Documentation available. On-site inspection is possible. The machines are now in dry storage.

Transformator

Abb TNOSCTN-400/21PNSm

Niemcy

2015

używany

na żądanie

INNO28079

Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible.

Pozostałe zapasy

Klopp/müller/reinhardt FWU 13-6/MPS2/RAS 52.80

Niemcy

1970

używany

na żądanie

INNO28076

Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible.

Wiertarka do głębokich otworów

Heyligenstaedt

Niemcy

1951

używany

na żądanie

INNO28075

A Heyligenstaedt deep-hole drilling machine is available. Speed: 1120 rpm, turning diameter: 282 mm. The wedge bar chuck is of high quality and relatively new. An on-site inspection is possible.

Prażarka taśmowa

Ceselsan CS 2500 Plus

Niemcy

2023

używany

na żądanie

INNO28074

A new belt roasting machine for nuts in the food industry is available. Fuel: diesel/electricity/gas/LPG, output: 2kW, machine dimensions X/Y/Z: approx. 3600mm/1900mm/1950mm, operating hours: 31h. Roasting capacity per hour: hazelnut kernels: 160kg, shelled peanuts: 150kg, shelled peanuts: 35kg, shelled pistachios: 90kg, sunflower seeds: 70kg, pumpkin seeds: 70kg, almonds: 120kg, cashew nuts: 150kg, chickpeas: 120kg. Including salt kettle with a capacity of 35kg and fully automatic high-pressure belt washer. Documentation available. On-site inspection is possible.

Maszyna do ciągnienia rur

Graewe BA 500/6

Niemcy

2008

używany

na żądanie

INNO28073

Max. pipe diameter: 500mm, power: 1.7kW, max. pipe thickness: 6mm, weight: approx. 4100kg. Documentation available. On-site inspection is possible.

Maszyna do ciągnienia rur

Ipm TR 400/6

Niemcy

2000

używany

na żądanie

INNO28072

Max. pipe diameter: 400mm, power: 2.9kW, max. pipe thickness: 6mm. Documentation available. On-site inspection is possible.

Piła planetarna

Graewe PS 500

Niemcy

2008

używany

na żądanie

INNO28071

A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible.

Piła planetarna

Ipm TP 400

Niemcy

2000

używany

na żądanie

INNO28070

A planetary saw (inline pipe saw) IPM is available. Max. pipe diameter: 400mm, power: 7kW, machine dimensions X/Y/Z: approx. 4500mm/2000mm/2300mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.

Zbiornik ze stali nierdzewnej

Gfk

Niemcy

nieznany

używany

na żądanie

INNO28064

Various stainless steel containers and tanks are available. 1) Stainless steel tank, volume: 7000l, diameter: 1600mm, length: 3500mm. 2) Wrapped GRP tank, volume: 9000l, diameter: 2000mm, length: 2900mm. 3) 4x stainless steel tanks. 4) 1x stainless steel tank. On-site inspection is possible.

Tokarka CNC

Boehringer VDF 250C

Niemcy

1992

używany

na żądanie

INNO28061

Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025.

Maszyna do wciskania

Tyco P300

Niemcy

2001

używany

na żądanie

INNO28060

A Tyco (TE Connectivity) press-fit machine (insertion machine) is available. Insertion dimensions X/Y: 300mm/310mm, max. speed: 150mm/s, max. number of insertions: 15 million/year, insertion capacity: 4000-5000 pins/h. Machine dimensions X/Y/Z: approx. 2400mm/1600mm/1450mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.

Koparka gąsienicowa

Zeppelin 325 LN

Niemcy

1993

używany

na żądanie

INNO28059

Power: 126kW, backhoe bucket capacity: 1.7m³, reach: 9760mm, track width: 600mm, breakout force: 236kN, displacement: 7200cm³, undercarriage: NLC, boom: monoblock, digging depth: 6570mm, torque: 1800rpm. Transport dimensions X/Y/Z: approx. 10350mm/3000mm/3300mm, weight: approx. 25500kg, operating hours: 20159h. Documentation available. On-site inspection is possible.

Betoniarka

Mercedes Arocs MB 3240B

Niemcy

2018

używany

na żądanie

INNO28057

Power: 290kW, Fuel: Diesel, TÜV: until 07.2025, Payload: 18775kg, Wheelbase: 4250mm, Displacement: 10700cm³, Rated torque: 1900rpm. Machine dimensions X/Y/Z: approx. 6200mm/2500mm/3300mm, weight: approx. 32000kg, mileage: 49873km. Documentation available. On-site inspection is possible.

Koparka gąsienicowa

Hitachi ZX250LC

Niemcy

2008

używany

na żądanie

INNO28056

Engine type: ZX250LCN-3, power: 132kW, fuel: diesel, max. digging depth: 6960mm, cubic capacity: 5193cm³, backhoe capacity: 1.65m³, track width: 600mm, undercarriage: NLC, boom: monoblock. Transport dimensions X/Y/Z: approx. 10300mm/3050mm/3000mm, weight: approx. 25000kg, operating hours: 16645, documentation available. On-site inspection is possible.