Piła formatowa

Altendorf F45

Niemcy

1995

używany

na żądanie

INNO30797

Sliding table length: 2800mm, Cutting width: 1000mm, Saw blade tilting: 45°, Saw blade diameter min./max.: 250mm/450mm, Motor power: 5.5kW, Weight: approx. 1250kg. An on-site inspection is possible.

więcej

Piła taśmowa

Kuris RBS 70

Niemcy

nieznany

używany

na żądanie

INNO30751

Table dimensions X/Y: 2000mm/1750mm, cutting range: 0mm-305mm, max. blade guide height: 300mm, saw blade length: 4920mm. On-site inspection is possible.

więcej

Jednostka ekstrakcyjna

Höcker Polytechnik Vacumobil VT 200-L

Niemcy

2014

używany

na żądanie

INNO30750

A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible.

więcej

Frezarka podłogowa

Ruwi Basic

Niemcy

2019

używany

na żądanie

INNO30749

Table dimensions X/Y: 520mm/430mm, speed: 25000rpm, milling stroke: 43mm, milling spindle diameter: 22mm, cutter diameter min./max.: 3mm/40mm, weight: approx. 60kg. On site inspection is possible.

więcej

Piła tarczowa

Striebig 5022

Niemcy

nieznany

używany

na żądanie

INNO30748

Cutting length: 4300mm, cutting height: 2200mm, cutting depth: 80mm, saw blade diameter: 30mm, bore: 30mm, speed: 4000rpm, machine dimensions X/Y/Z: approx. 5400mm/2900mm/1700mm, weight: approx. 1100kg. On site inspection is possible.

więcej

Frezarka

Morbidelli AU 502

Niemcy

1993

używany

na żądanie

INNO30747

A CNC drilling and milling center Morbidelli is available. Travel X/Y/Z: 2600mm/800mm/55mm, machine dimensions X/Y/Z: approx. 3400mm/2400mm/2200mm, weight: approx. 3300kg. An on-site inspection is possible. Available from May 2026.

więcej

Centrum obróbcze CNC

Homag Optimat BOF 211/Venture 12L

Niemcy

2008

używany

na żądanie

INNO30688

A CNC woodworking center Homag is available. Travel path X/Y/Z: 4000mm(4200mm)/1235mm/182mm, machine dimensions X/Y/Z: approx. 8000mm/5500mm/2950mm, operating hours: approx. 33226h. The machine is impact-sensitive at the terminal, and the laser shows problems with stone detection. Including spare operating equipment, chiller as well as various clamps and suction units. Documentation available. An on-site inspection is possible.

więcej

Piła wahadłowa

Stromab PS 600 P

Niemcy

2000

używany

na żądanie

INNO30653

A Stromab pendulum saw with swiveling saw unit and roller conveyors is available. Motor power: 7.5kW, saw blade diameter: 600mm, saw blade bore: 20mm, max. cutting height: 210mm, max. cutting length: 460mm, extraction port diameter: 150mm, roller conveyor length left/right: 2500mm/2500mm, roller conveyor width: 500mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

więcej

Szlifierka ramowa

Löwer RSM 280 S

Niemcy

1977

używany

na żądanie

INNO30613

Two identical single wood belt sanding machines Löwer are available. Sanding belt length: 1600mm, sanding belt width: 160mm, working width: 150mm, feed rate: 16m/min, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 1400mm/1000mm/1600mm, weight: approx. 650kg. On-site inspection is possible.

więcej

Piła tarczowa

Striebig Compact 5207

Niemcy

nieznany

używany

na żądanie

INNO30571

A vertical panel saw Striebig is available. Cutting length: 4600mm, cutting width: 2070mm, cutting thickness: 60mm, vertical cutting position spacing: 1000mm, saw blade diameter: 250mm, motor power: 3kW, extraction connection: 100mm. Machine dimensions X/Y/Z: approx. 5750mm/1500mm/2850mm, weight: approx. 850kg. Documentation available. An on-site inspection is possible.

więcej

Wiertarka do otworów pod kołki

Ayen DB 1200 B 39

Niemcy

1977

używany

na żądanie

INNO30470

Precision dowel boring machine. Pneumatic clamping, 2 drilling units, swivelling (0-90 degrees). Working width approx. 1200mm. Inspection possible by appointment.

więcej

Prasa do formowania

Odmi

Niemcy

nieznany

używany

na żądanie

INNO30397

Offered is an ODMI molded part press, year approx. 1980. 4 hydraulic cylinders, 1-4 cylinders, hydraulic pressure max/min 250bar/30bar, pressing force up to 50t per cylinder, 2 pressing stations, automatic operation, opening height 1120mm, cylinder stroke approx. 800mm, piston diameter 160mm, piston area per cylinder 201cm². Table size X/Y 745mm/2140mm, known defects: pull cord not correctly wired according to press inspection, emergency stop not up to current standard. Right cylinder with slightly leaking piston seal. Dimensions X/Y approx. 3200mm/1300mm, weight approx. 8000kg. Inspection possible by arrangement.

więcej

Wyciąg pyłu i kurzu

Höcker Polytechnik EA 250-4

Niemcy

1997

używany

na żądanie

INNO30387

Offered: Vacumobilmobilentstauber year 1997. Extraction diameter 250mm, nominal volume flow 4241m³/h, minimum volume flow 3534m³/h, negative pressure at minimum volume flow 2350Pa (measured at the interface with a 4.0m hose Ø250mm), motor power 4.0kW/0.18kW, nominal speed 3000min⁻¹/900min⁻¹, weight approx. 630kg. Inspection is possible by appointment.

więcej

Maszyna do powlekania rolkowego

Bürkle e.a.sy-Coater RCL-M 700

Niemcy

2016

używany

na żądanie

INNO30194

A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible.

więcej

Szlifierka

Elektra Beckum TF 904

Niemcy

2001

używany

na żądanie

INNO30108

Three grinding machines including several mobile extraction units are available. 1) Grinding machine Elektra Beckum TF 904/3.1WNB, year of manufacture: 2001, power: 3.1kW, speed: 8500rpm, grinding wheel diameter inner/outer: 30mm/200mm. 2) Mobile extraction unit Alko Mobil 200, year of manufacture: 2013, air volume flow: 2500m³/h, power: 2.2kW. An on-site inspection is possible.

więcej

Piła do forniru

Scheer FM 4-3100

Niemcy

nieznany

używany

na żądanie

INNO29946

Cutting length: 3100mm, machine dimensions X/Y/Z: approx. 4800mm/1200mm/1300mm, weight: approx. 800kg. An on-site inspection is possible.

więcej

Prasa na gorąco

Ott JU 65

Niemcy

1968

używany

na żądanie

INNO29945

An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.

więcej

Maszyna natryskowa

Venjakob HGS K

Niemcy

2005

używany

na żądanie

INNO29870

A vertical automatic surface spraying machine Venjakob in compact design is available. Working width: 800mm, working height range: 920mm-960mm, pass-through height: 200mm, feed speed: 3m-8m/min, air flow rate: 4000m³/h, extraction nozzle diameter: 400mm, gun control: LS1, airless spray guns: Krautzberger KAA 1300. Includes conveying system, extraction system, 2-gun drive, 4x spray guns, paint circulation system, and paint pump. Documentation available. An on-site inspection is possible.

więcej

Linia do rozkroju płyt

Anthon LNB-LNB150 63/33

Niemcy

1994

używany

na żądanie

INNO29852

A dividing system consisting of longitudinal and cross-cut saw Anthon is available. Production capacity at 800mm/500mm: approx. 20m³/h, max. panel dimensions X/Y: 6300mm/2500mm, total system dimensions X/Y/Z: approx. 48m/16m/3m, weight: approx. 60t. 1) Saw Anthon LNB-LNB, year of manufacture: 1994, max. package height: 150mm, control: Siemens S5. 2) In-house paternoster, decks: 3, levels: 2. 3) 4x liftomat Holzma Hau series, years of manufacture: 2004, stacking positions: 4. 4) Feeding system Systraplan, year of manufacture: 1989, stacking positions: 3. 5) Cut-off saw Holzma, year of manufacture: 1996. 6) Chipper Masur LZ 800, year of manufacture: 2003. Includes critical spare parts, such as a replacement control unit. This is a system for mass production. Documentation available. An on-site inspection is possible. Expected to be available from October 2026.

więcej

Piła taśmowa

Meber SR700

Niemcy

2017

używany

na żądanie

INNO29803

Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible.

więcej

Wszystkie oferty / Maszyny do obróbki drewna