Offered is an ODMI molded part press, year approx. 1980. 4 hydraulic cylinders, 1-4 cylinders, hydraulic pressure max/min 250bar/30bar, pressing force up to 50t per cylinder, 2 pressing stations, automatic operation, opening height 1120mm, cylinder stroke approx. 800mm, piston diameter 160mm, piston area per cylinder 201cm². Table size X/Y 745mm/2140mm, known defects: pull cord not correctly wired according to press inspection, emergency stop not up to current standard. Right cylinder with slightly leaking piston seal. Dimensions X/Y approx. 3200mm/1300mm, weight approx. 8000kg. Inspection possible by arrangement.
Offered: Vacumobilmobilentstauber year 1997. Extraction diameter 250mm, nominal volume flow 4241m³/h, minimum volume flow 3534m³/h, negative pressure at minimum volume flow 2350Pa (measured at the interface with a 4.0m hose Ø250mm), motor power 4.0kW/0.18kW, nominal speed 3000min⁻¹/900min⁻¹, weight approx. 630kg. Inspection is possible by appointment.
Three grinding machines including several mobile extraction units are available. 1) Grinding machine Elektra Beckum TF 904/3.1WNB, year of manufacture: 2001, power: 3.1kW, speed: 8500rpm, grinding wheel diameter inner/outer: 30mm/200mm. 2) Mobile extraction unit Alko Mobil 200, year of manufacture: 2013, air volume flow: 2500m³/h, power: 2.2kW. An on-site inspection is possible.
A dividing system consisting of longitudinal and cross-cut saw Anthon is available. Production capacity at 800mm/500mm: approx. 20m³/h, max. panel dimensions X/Y: 6300mm/2500mm, total system dimensions X/Y/Z: approx. 48m/16m/3m, weight: approx. 60t. 1) Saw Anthon LNB-LNB, year of manufacture: 1994, max. package height: 150mm, control: Siemens S5. 2) In-house paternoster, decks: 3, levels: 2. 3) 4x liftomat Holzma Hau series, years of manufacture: 2004, stacking positions: 4. 4) Feeding system Systraplan, year of manufacture: 1989, stacking positions: 3. 5) Cut-off saw Holzma, year of manufacture: 1996. 6) Chipper Masur LZ 800, year of manufacture: 2003. Includes critical spare parts, such as a replacement control unit. This is a system for mass production. Documentation available. An on-site inspection is possible. Expected to be available from October 2026.
A complete coating system for coating and further processing of panel material is available. 1) Single-component adhesive application system Oest Ecopur FFN 2500, year of manufacture: 2008, adhesive type: polyurethane, application area: panel and web coating. 2) Flatbed press Bürkle HSO 192, year of manufacture: 1978. The machine was completely overhauled in 2018, including control system and mechanics. 3) Guillotine shear Hüttenlocher & Schäfer HSK/G, year of manufacture: 2008. 4) Paternoster Schwab TU with a decoiling system, year of manufacture: 2008. 5) Covering table Otech ÜZT 1088, year of manufacture: 2019. Adhesive transport belt Haas SN 10100, year of manufacture: 2008. Documentation available. An on-site inspection is possible.
Two identical circular saws Cremona for the veneer production industry are available. Working width saw 1: 4200mm, working width saw 2: 5100mm. An on-site inspection is possible. Sale of individual units is possible.
A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible.
A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible.
A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request.
Woodworking machines [1 - 20 of 80]
de-DE
pl-PL
