▷ Używane maszyny do obróbki drewna z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Maszyny do obróbki drewna [1 - 20 of 106]

Centrum obróbcze CNC

Reichenbacher Vision II Sprint

Niemcy

2006

używany

na żądanie

INNO32084

A Reichenbacher CNC 5-axis twin-head machining center for the door manufacturing industry is available. Spindle power: 15kW, Speed: 24000rpm, Tool interface: HSK-F63, Tool positions: 60, Milling spindle spacing: 1040mm, Spindle housing dimension: 150mm, Travel X/Y/Z: 5100mm/2100mm/2650mm, Tool change stroke: 550mm, Max. travel speed X/Y/Z: 60m/min/90m/min/20m/min, Clamping beam speed: 40m/min. Vacuum support rails: 2, Vacuum cups: 2×30, Stop stroke: 150mm, Stop pin diameter: 30mm, Through-feed stop 1/2: 300mm/700mm, Max. veneer overhang: 5mm, Max. veneer thickness: 5.5mm. Workpiece length range: 800mm-3200mm, Workpiece width range: 600mm-1400mm, Workpiece thickness range: 38mm-72mm, Max. workpiece weight: 200kg. Chip conveyor belt width: 700mm, Infeed roller conveyor dimensions X/Y: 6000mm/1600mm, Outfeed roller conveyor dimensions X/Y: 6350mm/1600mm. Overall system dimensions X/Y/Z: approx. 18300mm/9750mm/3500mm, Machine dimensions X/Y/Z: approx. 4200mm/1600mm/3000mm, Machine weight: approx. 10500kg, Control system: Siemens Sinumerik 840D power-line. Including fully automatic infeed and unloading, 2×gantry cranes, safety equipment, various tools and a self-lowering roller table. This system was modernized in 2016. Documentation vorhanden. An on-site inspection is possible.

Wysokopojemna suszarka typu Paternoster

Giardina GV4T/C

Niemcy

2007

używany

na żądanie

INNO32082

A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible.

Stół montażowy

Schmidler

Niemcy

1999

używany

na żądanie

INNO32054

A hydraulic lifting table Schmidler with a clamping unit for the woodworking industry is available. Machine dimensions X/Y/Z: approx. 12000mm/2550mm/3400mm. Documentation available. An on-site inspection is possible.

Piła tarczowa

Strebig Standard 5220A/G

Niemcy

1988

używany

na żądanie

INNO32047

A Strebig vertical panel saw is available. Horizontal/vertical cutting length: 4200mm/2200mm, max. cutting depth: 80mm, saw blade diameter: 300mm, saw blade bore: 30mm, speed: 4750rpm, machine dimensions X/Y/Z: approx. 5200mm/1200mm/2700mm, weight: approx. 800kg. An on-site inspection is possible.

Zakład impregnacji

Wichmann-metallbau 28-M3

Niemcy

1997

używany

na żądanie

INNO32044

A large-format wood impregnation plant by Wichmann-Metallbau is available. Nominal volume: 28m³. An on-site inspection is possible.

Automatyczna maszyna ciesielska

Hans Hundegger ABM-K2-A

Niemcy

2000

używany

na żądanie

INNO32042

A fully automatic 4-axis Hundegger joinery machine is available. Material: structural timber, standard material: softwood, min. timber cross section X/Y: 20mm/50mm, max. timber cross section X/Y: 300mm/560mm, min. timber length in automatic operation: 300mm, max. feed rate: 25m/min, max. hydraulic pressure: 100bar. Saw blade diameter: 735mm, kerf: 6mm, saw blade thickness: 4.4mm, bore: 30mm. Cylindrical cutter diameter: 350mm, cylindrical cutter width: 120mm, cylindrical cutter inner diameter: 55mm. Machine dimensions X/Y/Z: approx. 12000mm/2400mm/2550mm, weight: approx. 13t, control system: Siemens Pentium 400 with Hundegger EKP. Documentation available. An on-site inspection is possible.

Rozdrabniacz do drewna

Mawera RZM 300

Niemcy

1995

używany

na żądanie

INNO31992

A robust Mawera wood shredder including feed floor is offered. Throughput capacity: approx. 500kg/h, feed width: 844mm, drive power: 22kW, number of blades: 30, blade diameter: 64mm, motor speed: 1480rpm, control system: PLC, weight: approx. 2100kg, dimensions: approx. 2020mm/1650mm/1250mm. Inspection by appointment possible.

Frezarka stołowa

Hofmann TFS 106

Niemcy

2011

używany

na żądanie

INNO31963

A Hofmann tilting spindle moulder is offered. Table size X/Y: approx. 1200mm/815mm, working height: approx. 895mm, height adjustment: approx. 145mm, spindle tilt range: -45.5° to +45.5°, spindle diameter: 30mm, max. tool diameter: 250mm, spindle speeds: 3000/4500/6000/9000rpm, dust extraction ports: 2×120mm. Dimensions: approx. 1250mm/815mm/1700mm, weight: approx. 950kg. Inspection by appointment is possible.

Strugarka

Scm F 520 Nova

Niemcy

2009

używany

na żądanie

INNO31955

SCM surface planer offered. Working width: 520mm, cutter block diameter: 120mm, knife dimensions X/Y/Z: 520mm/35mm/3mm, max. speed: 5000rpm, max. depth of cut: 8mm, total jointer table length: 2750mm, infeed table length: approx. 1550mm, dust extraction port diameter: 120mm, machine dimensions X/Y/Z: approx. 2750mm/1415mm/1200mm, weight: 875kg. Inspection by appointment possible.

Maszyna do łączenia forniru

Kuper FW 1150

Niemcy

1990

używany

na żądanie

INNO31889

A Kuper zigzag veneer splicing machine is offered. Overhang: 1150mm, working width: 1150mm, veneer thickness range: approx. 0.3mm-3mm, feed rate: approx. 10-30m/min, feed drive power: 0.55kW, working height: approx. 980mm, machine dimensions X/Y/Z: approx. 2160mm/780mm/1650mm, weight: approx. 540kg. Documentation available. Inspection possible by appointment.

Okleiniarka

Ima Combima Systems I/R751220/R3

Niemcy

2005

używany

na żądanie

INNO31822

A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible.

Szlifierka do krawędzi i profili

Arminius SE-32

Niemcy

1994

używany

na żądanie

INNO31811

A modular profile and edge belt sanding machine is offered for sanding solid wood and veneered edges in continuous operation. Feed rate: 5-25m/min, Units: 5, Workpiece thickness range: 12mm-60mm, Conveyor chain: 80mm, Sanding belt length: 2000mm, Sanding belt width: 20mm/35mm, Belt speed: approx. 7m/s, Max. working radius: 12mm. Machine dimensions: approx. 2670mm/1200mm/1800mm. Weight: approx. 1200kg. Documentation available. Inspection possible by appointment.

Linia do obróbki krawędzi

Ima Combima K/II/R75-3.1/975/F/R3/ AVM K/I/680/865/R3

Niemcy

1997

używany

na żądanie

INNO31809

A 1.5-times linked IMA edge processing line with automatic Venjakob workpiece transfer is offered. Max. working width: 2500mm, transfer angle: 90°, distance between the workpiece edges: 6000mm. Control system: Siemens S5. Including peripheral equipment and conveying system. Required installation space: approx. 250-300m², overall dimensions X/Y: approx. 19000mm/13600mm. IMA. Operator PC: renewed in 2018. Inspection possible by appointment.

Instalacja natryskowa

Venjakob HGS-Z/PC

Niemcy

1998

używany

na żądanie

INNO31802

An automatic Venjakob flat surface spray coating system is available. Coating material: water-based coating, working width: 1300mm, max. passage height: 70mm, working height range: 880mm-920mm, min. workpiece dimensions X/Y: 100mm/200mm, max. workpiece dimensions X/Y: 1200mm/3000mm, max. coating material pressure: 200bar, working speed: 3m/min. An on-site inspection is possible.

Rozdrabniacz bębnowy

Vecoplan VTH 85/20/3 VU

Niemcy

2006

używany

na żądanie

INNO31726

A robust wood shredder is offered. Infeed width: 850mm, drive power: 90kW, rotor type: U-rotor, number of knife crowns: 45, motor speed: 1480rpm, control system: PLC. Equipped with control cabinet, U-rotor with 45 knife crowns, Holtec vibrating conveyor trough type DS 750 X/Y: 750mm/18500mm. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 3800mm/1700mm/1400mm. Inspection possible by appointment.

Tartak

Baljer & Zembrod/linck/vollmer Asterix/U 71/CNE

Niemcy

1998

używany

na żądanie

INNO31706

A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible.

Prasa do forniru

Siemens K2012

Niemcy

1964

używany

na żądanie

INNO31701

A Siemens high-frequency veneer and gluing press is available. Pressing force: 100t, high-frequency power: 6kW, press area X/Y: 2000mm/1200mm. An on-site inspection is possible.

Dwustronna formatyzerka krawędzi

Ima FBA/II/260

Niemcy

1985

używany

na żądanie

INNO31651

An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Automatyczne centrum obróbki profili

Urban AP 6500 F

Niemcy

2012

używany

na żądanie

INNO31617

Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip tray, 6 removable chip drawers, pendulum operation for normal table, protection by light barrier, device for efficient production of series parts, machine table with separating discs for 900mm safety zone, spray mist device, tank capacity: approx. 1l, laser technology, retrofit AP6500 HK laser technology. Control: HEIDENHAIN iTNC530, length: 8000mm, width: 2400mm, height: 2450mm, weight: 4.5t, with documentation. An on site inspection is possible.

Suszarnia do drewna

Mühlböck MB 4000

Niemcy

nieznany

używany

na żądanie

INNO31517

Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible.