▷ Używana technologia napełniania napojów z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Technologia napełniania butelek do napojów

Inne maszyny 11 Napełnianie miękkiego kartonu 1 Rozlewnie 13 Systemy napełniania pojemników 4

Innovac maszyny-uzywane

Technologia napełniania butelek do napojów [1 - 20 of 29]

Maszyna do czyszczenia butelek

Gm Arcade ARCADE GEK 2.1 RV1

Niemcy

2024

używany

na żądanie

INNO29022

Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible.

Linia do puszek

Ima/cremer/cbv/deckert/uhlmann UN 800S/CF1220/Servo/AVM 738/Sensitive 350

Niemcy

2019

używany

na żądanie

INNO28998

A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible.

System napełniania kanistrów

Müpeck Montana 3

Niemcy

1992

używany

na żądanie

INNO28891

A canister filling system for the food industry is available. Dosing system: piston dosing unit, container: 80l, dosing cylinder: V4A, control: Knorr, filling range: 1000l-10150l. Documentation available. On-site inspection is possible.

Maszyna do napełniania i zakręcania

Alcoa 28 MCA

Niemcy

1997

używany

na żądanie

INNO28723

A vacuum filler for hot filling and a 4-head Alcoa capper are available. 1) Vacuum filler for hot filling, running direction: left-right, bottle formats: 1l VDF/0.5l NRW/0.33l Ale/0.75l Bordeaux, filling capacity: 5000 bottles/h. 2) 4-head capping machine Alcoa 28 MCA, year of construction: 1997, bottle formats: 0.5l NRW/1l and 0.75l Bordeaux, capping capacity: 5000 bottles/h. The two machines were part of a complete line. The capper can screw more than 5000 bottles/h, but it was limited by the filler. Both machines with complete documentation and dismantled. On-site inspection is possible. Individual purchase possible.

Maszyna korkowa

Kematec Korma S1

Niemcy

2003

używany

na żądanie

INNO28641

A Kematec cork capping machine is available. Capping capacity: 900-3000 bottles/h, cap type: four-wire cap, bottle height range: 235mm-360mm, bottle height tolerance: +/-5mm, bottle diameter range: 60mm-120mm, bottle diameter tolerance: +/-3mm, magazine capacity: 1600 caps, working height: 1050mm, working height adjustment: +/-50mm, machine dimensions X/Y/Z: approx. 1700mm/1900mm/3100mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

Zamrażarka z wąskim gardłem

Barida ICE 2200/2500

Niemcy

2015

używany

na żądanie

INNO28640

A Barida bottle neck freezer (ice tray) for the beverage industry is available. Packaging capacity: 2500 bottles/h, bottle volume range: 23.7cl-150cl, bottle diameter range: 70mm-115mm. Including cooling compressor CCB 2500 BTG, year of manufacture: 2015, coolant: R507, coolant capacity: 15kg, operating pressure: 24bar, operating overpressure: 30bar, weight: approx. 850kg. The system has now been dismantled. Documentation available. On-site inspection is possible.

Sortownik korków

Neri Philip & Csnc MIN-OR

Niemcy

2009

używany

na żądanie

INNO28639

A Neri cork sorter is available. Basket dimensions X/Z: approx. 580mm/1680mm, sorting capacity: approx. 3000/h, machine dimensions X/Y: approx. 720mm/350mm. On-site inspection is possible.

System napełniania, etykietowania i pakowania

Stork/silmo/robino & Galandrino/adelski VV-24/ST XII/Monoblocco Fenix 3/P2004 Longcap

Niemcy

2007

używany

na żądanie

INNO28507

A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galandrino Monoblocco Fenix 3, year of manufacture: 2002, 6) Syscona Unicount closure checker with counter for cork and metal closures, 7) Garnep Lebetta 4/3/18 1320 labeller, year of manufacture: 2017, including 2x wet gluing units, 3x SK units, camera system for rough alignment of bottles and domino laser for imprints, 8) Adelski PP2004 Longcap automatic capping machine, year of manufacture: 2007, 9) Adelski MCA PV 6541/1/210 AVM2104 automatic capping machine, year of manufacture: 1999, 10) Corker Bertolaso Delta, year of manufacture: 1977, 11) Carton sealing machine Normpack NCF-047, year of manufacture: 2001, including hot melt gluing unit, 12) Packaging machine Kettner Robot Junior Packer BE 2-T, year of manufacture: 1992, 13) Pallet loading machine Kettner Pressant Universal 1200, year of manufacture: 1992, 14) Crate labeling machine Weber Legi-Air 40XX, year of manufacture: 2004, 15) Dryer Okema T3, year of manufacture: 1999, 16) Carton printing machine Blum CompactLine 3. 0, number of heads: 8, printing options: double-sided, 17) Silmo 40g ozone generator, year of manufacture: 1983, 18) Schaberger glass lifting machine, year of manufacture: 1977, including new glass head, 12-bottle crate head and bottle table. Documentation available. On-site inspection is possible.

Maszyna do napełniania butelek

Khs Innofill DRS

Niemcy

2013

używany

na żądanie

INNO28279

A KHS bottle filling machine is available. Filling object material: glass, filling points: 168, filling capacity: 22000-65000 bottles/h, sterile filter: 0.2µm, max. oil content: 0.01mg/m³, max. solids content particle diameter: 10µm, min. filling capacity per filling point: 250-300l/h, filler type: pitch circle, pitch circle filler diameter: 5040mm, bottle volume: 0.33l/0.5l, bottle formats: Steini/Long Neck Pils/NRW Pils/Long Neck. Documentation available. On-site inspection is possible.

Maszyna do napełniania butelek

Sipa/smi/zecchetti SF8-4/Gamma 20

Niemcy

2016

używany

na żądanie

INNO27935

A complete 1l (1000ml) PET bottle filling line, which was used for the food industry, especially in the dairy industry, is available. Components: 1) Blow molding machine SIPA SF 8/4, year of manufacture: 1999, including preform magazine, conveyor belt and 1-liter PET bottle mold set. 2) MAI bottle filling machine for fresh milk, with monobloc PET bottle filler, screw capper, screw cap magazine and conveyor belt. 3) Kube K20 bottle labeling machine, year of manufacture: 2016. 4) Gamma 20 shrinking machine, year of manufacture: 2016. 5) Discharge conveyor for the filled bottles. 6) Air conveyor for empty PET bottles. 7) Air compressor and air preparation for the blowing machine. Production output of the entire system: 3270 bottles/h. Documentation available. On-site inspection is possible.

Linia do napełniania butelek

Sipa/dawson/scaligera SF8-4/15x5/Ullisse 4000

Niemcy

2005

używany

na żądanie

INNO27934

A complete 0.5l (500ml) PET bottle filling line, which was used for the food industry, especially in the dairy industry, is available. Components: 1) Blow molder SIPA SF 8/4, year of manufacture: 1999, including preform magazine, conveyor belt and PET bottle mold set. 2) Dawson 15x5 bottle filling machine for fresh milk, including screw cap magazine and conveyor belt. 3) Shrinking and labeling machine Scaligera Ullisse 4000, year of manufacture: 2005. 4) Shrinking machine Gáspár-Pack. 5) Discharge conveyor for the filled bottles. 6) Air conveyor for empty PET bottles. 7) Air compressor and air preparation for the blowing machine. Production output of the entire system: 2800 bottles/h. Documentation available. On-site inspection is possible.

Linia do napełniania i pakowania

Elopak S-PS80HA

Niemcy

2008

używany

na żądanie

INNO27074

A complete filling line from filler to packer is available. Format: Gable top/pyramid pack 0.50l/0.75l/1l, output: approx. 7000 packs/h, dimensions X/Y/Z: approx. 9500mm/3200mm/3500mm, weight: approx. 13000kg, operating hours: approx. 32500h. Applicator: 3x Elopak E-PLA-S30, year of construction: 2009, air pressure: 700kPa, weight: approx. 1000kg. Packer: Oystar A+F Traypacker TF, year of construction: 2011.

Linia napełniająca do mleka

Elopak PS 50

Niemcy

nieznany

używany

na żądanie

INNO23511

Format: 0.5-1l, max. output: 5000 cartons/h, with cap applicator and EURO-LINE cartoning machine, an on-site inspection is possible.

Zakrętarka

Rico BVH.10 8.14.8

Niemcy

2004

używany

na żądanie

INNO26582

Bottle format: 0.33l Steinie, throughput: 12,000 bottles/h, number of capping stations: 14, control system: Siemens SIMATIC PANEL, on-site inspection is possible.

Pakowacz

A+f Automation Contiflex Multiformer

Niemcy

2021

używany

na żądanie

INNO25567

There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible.

Inspektor pustych butelek

Krones Linatronic 735 M2

Niemcy

2007

używany

na żądanie

INNO25365

Output: 39,600/h, additional accessories are available.

Linia do napełniania butelek

Kettner / Krones / Schneider

Niemcy

1991

używany

na żądanie

INNO24948

The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years.

Inspektor pustych butelek

Heuft reflexx

Niemcy

2009

używany

na żądanie

INNO24401

There are four HEUFT inspectors available (1) empty container inspector with rejection (2) empty container inspector (3) logo detection with rejection (4) empty bottle inspector with reject table and rejections (5) belts and belt control with the complete motors.

Maszyna do napełniania i zakręcania butelek

Gkm VARIAT

Niemcy

1987

używany

na żądanie

INNO22656

Output: 8000 bottles/h, machine is fully functional.

Myjka przemysłowa do beczek

Leifeld+lemke KBV 100

Niemcy

1986

używany

na żądanie

INNO22540

Output: 90-120/h, keg dimensions: 365-570x355-650mm, with instruction manual and layout.