Młyn młotkowy

Haas HSZ-V 1300

Niemcy

2011

używany

na żądanie

INNO32327

Max. throughput: 25t/h, inlet width: 1300mm, inlet height: 1200mm, rotor diameter: 1200mm, drive power: 132-315kW, an on-site inspection is possible.

więcej

Stół sortujący

Trennso-technik TTS 900/1000/ 1 KW

Niemcy

2008

używany

na żądanie

INNO32326

Two identical separating tables are available, screen width: 890mm, screen length: 1000mm, screen area per screening deck: 0.89m², number of screening decks: 1, number of outlets: 2 (light/heavy material), screen clamping: manual/pneumatic, dimensions with outlets: 1738x1287x1351mm, dimensions without outlets: 1140x1287x1351mm, weight: 700kg, an on-site inspection is possible.

więcej

Piec rolkowy

Studio 1 ST1 FRM 9/1200/1250°

Niemcy

1997

używany

na żądanie

INNO32314

Suitable for firing ceramics and clay, number of burners: 10+1, fuel: natural gas or liquefied petroleum gas (LPG), connected load: 8kW, length: 8800mm, width: 2200mm, height: 2300mm, with control cabinet, control panel and spare parts, the machine has few operating hours, an on-site inspection is possible.

więcej

Pozioma prasa do belowania

Hsm AK 10/900

Niemcy

1987

używany

na żądanie

INNO32303

Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible.

więcej

Prasa do belowania

Hsm 155.2 VL

Niemcy

2001

używany

na żądanie

INNO32062

Press force: 16t, Feed opening dimensions X/Y: 1100mm/590mm, Chamber dimensions X/Y/Z: 1100mm/700mm/1130mm, Bale dimensions X/Y/Z: 1100mm/700mm/950mm, Max. bale weight: 200kg, Tying: 4-way vertical, Throughput: approx. 4-8 bales/h, Machine dimensions X/Y/Z: approx. 1450mm/950mm/2400mm, Weight: approx. 950kg. No UVV inspection and the hydraulic oil has been drained. The baler has not been cleaned. An on-site inspection is possible.

więcej

Suszarka tunelowa

Smt HTT 4.5 K 6-5

Niemcy

2012

używany

na żądanie

INNO32023

An SMT continuous drying system is available. Infeed height range: 850mm-950mm, process chamber length: 12500mm, heating zones: 9, bottom heating zones: 4, heating length: 4500mm, convection section: 4500mm, max. process temperature: 230°C, cooling zones: 12, cooling zone length: 6775mm, cooling units: 3, conveyor type: PTFE belts, conveyor width: 800mm, working width: 800mm, max. speed: 3m/min, top/bottom clearance: 30mm/0mm, exhaust connection diameter: 300mm, machine dimensions X/Y/Z: approx. 13000mm/2000mm/2350mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible.

więcej

Pralka do szkła

Malnati 800 TNS

Niemcy

nieznany

używany

na żądanie

INNO32006

A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

więcej

Maszyna do cięcia szkła

Hegla VSG-A 46 MT

Niemcy

2002

używany

na żądanie

INNO31843

A Hegla glass cutting system will be available approximately from December 2026. Direction of travel: right-left, connected load: 35kW, max. glass sheet dimensions X/Y: 4600mm/3210mm, max. single glass thickness: 16mm, machine dimensions X/Y/Z: approx. 13200mm/6000mm/1000mm. The stops are worn. Documentation available. An on-site inspection is possible.

więcej

Linia do hartowania szkła

Efco Glass Temperer

Niemcy

2001

używany

na żądanie

INNO31728

A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment.

więcej

Prasa do belowania

Mac Fab MF LH300

Niemcy

2020

używany

na żądanie

INNO31698

A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible.

więcej

Piec do szkła

Efco Furnaces 2400 x 4200 Glass Temp

Niemcy

1997

używany

na żądanie

INNO31677

A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible.

więcej

Prasa belująca pionowa

Hsm V-Press 818

Niemcy

2012

używany

na żądanie

INNO31618

Pressing force: 185kN, filling opening dimensions: 1195x541mm, max. bale weight depending on material: 200kg, max. bale dimensions: 1200x780x700mm, throughput capacity: 2 to 5 bales/h, idle cycle time: 35s, strapping: 4 fold with polyester strap, pressing capacity at idle: 68m³/h, pressing chamber dimensions: 1200x780x1300mm, voltage: 3x 400V, motor power: 3kW, length: 1700mm, width: 1046mm, height: 2370mm, weight: 994kg. An on site inspection is possible.

więcej

Maszyna do cięcia szkła

Lisec ESL-60/30RS

Niemcy

1998

używany

na żądanie

INNO31247

A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.

więcej

Przepustnica kątowa próżniowa

Leybold BAV DN800 ISO-F EP VA

Niemcy

nieznany

używany

na żądanie

INNO31055

Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible.

więcej

Rozdrabniacz

Burghardt PS Starter

Niemcy

2021

używany

na żądanie

INNO30995

A Burghardt cardboard shredding machine is available. Cutting width: 320mm, max. cardboard thickness: 12mm, throughput capacity: approx. 2m³/h, operating speed: 10m/min, motor power: 0.75kW, machine dimensions X/Y/Z: approx. 500mm/600mm/650mm, weight: approx. 100kg. Documentation vorhanden. An on-site inspection is possible.

więcej

Maszyna odwadniająca

Hiller DCH76-402

Niemcy

2010

używany

na żądanie

INNO30966

A Hiller two-phase centrifuge for solid-liquid separation and dewatering is available. Drum speed: 2700rpm, max. operating speed: 2650rpm, max. feed material density: 1.3kg/dm³, drum inner diameter: 752mm, drum wall thickness: 20mm, drum material: 1.4470, max. operating temperature: 50°C, max. operating pressure: 0bar, motor power: 75kW. Machine dimensions X/Y/Z: approx. 5100mm/2300mm/1750mm, weight: approx. 11600kg. Documentation available. An on-site inspection is possible. Image is an example.

więcej

Maszyna do piaskowania

S.a.g. T3/T4

Niemcy

2005

używany

na żądanie

INNO30958

Two glass sandblasting systems from S.A.G. are available. 1) S.A.G. T4, year of construction: 2005, arrangement: vertical, max. blasting width: 3000mm, max. blasting height: 2250mm, max. glass height: 2400mm, glass thickness range: 3mm-40mm, blasting capacity: approx. 15m²/h, machine dimensions X/Y/Z: approx. 3800mm/3300mm/1900mm, weight: approx. 1550kg. 2) S.A.G. T3, year of construction: 2002, blasting width: 2800mm, blasting height: 1200mm, glass thickness range: 3mm-40mm, machine dimensions X/Y/Z: approx. 4100mm/2300mm/1900mm, weight: approx. 1350kg. Documentation available. An on-site inspection is possible.

więcej

Rozdrabniacz

Erdwich M600/1-600

Niemcy

2021

używany

na żądanie

INNO30878

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

więcej

Maszyna do szlifowania szkła

Knopp Glaskant-Combi

Niemcy

1992

używany

na żądanie

INNO30740

An old Knopp glass grinding machine for edge processing is available. Grinding belt dimensions X/Y: 1830mm/100mm, glass types: float glass/mirror glass/furniture glass/table tops, grinding wheel diameter: 200mm, table dimensions X/Y: 900mm/1400mm, machine dimensions X/Y/Z: approx. 1300mm/1500mm/1700mm, weight: approx. 500kg. On site inspection is possible.

więcej

Rozdrabniacz

Vecoplan VAZ 1300 M KN

Niemcy

2008

używany

na żądanie

INNO30680

A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.

więcej

Wszystkie oferty / Inne maszyny