▷ Używana technika transportowa z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Technika transportowa

Inne maszyny 6 Pompy 12 Przenośniki materiałów masowych 3 Przenośniki rolkowe 2 Systemy przenośnikowe 11 Taśmociągi 13 Wciągnik łańcuchowy i technika podnoszenia 9 Wibratory 1

Innovac maszyny-uzywane

Technika transportowa [1 - 20 of 57]

Przenośnik taśmowy

Niemcy

nieznany

używany

na żądanie

INNO29146

A waterproof trough conveyor belt, therefore well suited for wet goods such as a food washing system (vegetables/fruit), is available. Material: stainless steel, belt width: 370mm, trough width: 400mm, trough height: 150mm, total length: 12300mm, total width range: 500mm-600mm. Without motor. Documentation available. On-site inspection is possible.

Przenośnik taśmowy

Stöber K21R 90 S4 TLB 960

Niemcy

nieznany

używany

na żądanie

INNO29145

An Intralox belt, buffer table and Stöber conveyor belt are available. Belt width: approx. 1150mm, belt length: approx. 4900mm, frame material: stainless steel. Including 4 belts. Documentation available.

Przenośnik taśmowy

Dmg Mori B-F7003

Niemcy

nieznany

używany

na żądanie

INNO29141

A chip conveyor for DMG Mori machines is available. Height: 1650mm, width: 1870mm, length: 3560mm, weight: approx. 600kg. Without pump and skimmer. Approximately half of the rails for further transportation are defective. Documentation available. On-site inspection is possible.

Przenośnik wibracyjny

Fuji 2UDLFY000100

Niemcy

2023

używany

na żądanie

INNO29131

A vibratory stick feeder from FUJI for feeding electronic components in stick magazines is available. The device was repaired and calibrated in 2023. Accessories included. Documentation available.

Przenośnik ślimakowy

Rh

Niemcy

nieznany

używany

na żądanie

INNO29110

A stainless steel screw conveyor is available. Shaft diameter: 115mm, spiral outer diameter: 350mm, pitch: 180mm, total length: 4200mm. On-site inspection is possible.

Przenośnik taśmowy

Rothstein RO80 3000x300

Niemcy

nieznany

używany

na żądanie

INNO29049

Two Rothstein and Plast Service conveyors are available. 1) Inclined conveyor Rothstein RO80 3000x300, year of construction: probably 2005, length: 3000mm, width: 300mm, max. load: 7kg/m, rated power: 0.18kW. 2) Ascending conveyor Plast Service. On-site inspection is possible.

Manipulator kolumnowy

Dalmec PARTNER EQUO PEC

Niemcy

2018

używany

na żądanie

INNO29011

Max. load capacity: 150kg, operating pressure: 0.9MPa, base dimensions: 800x800mm, eeight: 3.125kg. Has been regularly serviced. On-site inspection is possible.

Przenośnik zgrzebłowy

Knoll 340 K-1/220

Niemcy

2024

używany

na żądanie

INNO28744

Chain pitch: 40mm, belt width: 220mm, min. pick-up height: 145mm, tilt range: 0°/75°, machine dimensions X/Y/Z: approx. 3000mm/800mm/1900mm, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

System przenośników granulatu

Somos FG

Niemcy

2018

używany

na żądanie

INNO28635

A Somos conveying device for pneumatic conveying of free-flowing granulates and regrinds is available. Useful volume: 90l, product nozzle diameter: 84mm, clean air nozzle diameter: 84mm, max. operating temperature: 150°C. Documentation available. On-site inspection is possible.

Wciągarki linowe

Konecranes HoistMaster 2i

Niemcy

nieznany

używany

na żądanie

INNO28600

Two identical Konecranes wire rope hoists are available. Including frequency converter and braking resistor. Documentation available. On-site inspection is possible.

Belka dźwigowa

Tiger TA-LK

Niemcy

2014

używany

na żądanie

INNO28560

A Tiger cassette lifting beam is available. Pick-up width: 2090mm, load capacity: 2500kg, machine dimensions X/Y/Z: approx. 800mm/700mm/650mm, weight: approx. 250kg. Documentation available. On-site inspection is possible.

Obrotowa stacja podnoszenia

Kuttler PR-90 LS150

Niemcy

2008

używany

na żądanie

INNO28529

A Kuttler automatic handling machine that moves workpieces or material blanks on a production line is available. Infeed height: 1050mm, outfeed height: 900mm, cutting and turning range: 90°, workpiece lowering: 150mm, machine dimensions X/Y/Z: approx. 14500mm/1000mm/2100mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.

System przenośników granulatu

Mischboy/karl W. Müller 500 A 3/SD-600

Niemcy

nieznany

używany

na żądanie

INNO28400

A complete material conveyor system for plastic granulate is available. Components: Control system for 10 end devices, side channel compactor with filter and six color dosing devices for direct coloring, six material conveying pots. On-site inspection is possible.

Przenośnik rolkowy

Torwege Edelstahl

Niemcy

nieznany

używany

na żądanie

INNO28353

Several roller conveyors are available for washing baskets that were set up in a low-dust production area. Wash basket width: 500mm. Single pieces without drive. Including swivel table. The roller conveyors are ready for collection.

Tor kublowy

Swl 12t

Niemcy

2016

używany

na żądanie

INNO28341

A complete bucket conveyor system is available. 1) Mobile bucket, year of construction: 2016, volume: 1000l. With internal coating and drives. 2) Mobile bucket, year of construction: 2013, volume: 1000l. The machine is overhauled, including drives. 3) Mobile bucket, volume: 1000l. The machine is not overhauled, with drives and dismantled rotary motor. 4) Switch. 5) Running rails, length: approx. 150m, track width: 1000mm, year of manufacture: 1970-1995, including two 90° curves and partly with lattice girders and reinforcements. 6) Running rails, year of construction: 2018, length: approx. 96m. Including two 45° curves. The bucket conveyor system is without gantries. On-site inspection is possible.

Kłowa pompa próżniowa

Busch Mink MM 1144 Av

Niemcy

nieznany

używany

na żądanie

INNO28252

Suction capacity: 78m³/h, final pressure: 60mbar, motor power: 1.5kW, speed: 1500rpm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Przenośnik spiralny

Ambaflex

Niemcy

2012

używany

na żądanie

INNO28219

Two AmbaFlex spiral conveyors are available. 1) Height: 3100mm, infeed height: 1400mm, slat width: 400mm. 2) Height: 2650mm, inlet height range: 600mm-800mm, slat width: 400mm, defects: Torque support motor and missing foot disk. Can be repaired as required before sale. Documentation available. On-site inspection is possible.

Przenośnik taśmowy

Göztepe/lübke

Niemcy

2018

używany

na żądanie

INNO28191

Various conveyor belts, Z-slope conveyors, Z-track conveyors, belt conveyors and a conveyor belt with cleats from the manufacturers Göztepe and Lübke are available. Documentation for Göztepe available. On-site inspection is possible.

Kipp- und Sortieranlage

Skako/ventzki 50D/NEE 511-111-S

Niemcy

2013

używany

na żądanie

INNO27909

A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.

Mimośrodowa pompa śrubowa

Netzsch BEF200

Niemcy

2003

używany

na żądanie

INNO27668

Two similar Netzsch progressive cavity pumps are available. Power: 15kW, max. delivery pressure: 8bar, delivery rate: 1000l/h, speed: 1450rpm, max. viscosity: 1000Pas. One of the machines is mobile. On-site inspection is possible.