▷ Używana technologia automatyzacji z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Technologia automatyzacji

Inne maszyny 7 Manipulatory 7 Maszyny montażowe 5 Maszyny pozycjonujące 1 Maszyny sortujące 3 Rozdzielnice i szafy sterujące 1 Sterowanie 3 Technologia nakładania materiałów 38

Innovac maszyny-uzywane

Technologia automatyzacji [1 - 20 of 65]

Lutownica selektywna

Atf 35/25

Niemcy

2012

używany

na żądanie

INNO32262

A Atf selective soldering system in need of repair is offered. Process area: 350x250mm, extraction capacity: 200m³/h, power/capacity: 400V 50/60Hz. Machine dimensions X/Y/Z: approx. 1560mm/1375mm/1060mm, weight: approx. 380kg without solder. With spray fluxer, temperature sensor and nitrogen equipment. The Z-axis loses its reference position after repeated operation. Inspection by appointment is possible.

Linia montażowa

Juki KE-3020/ FX3

Niemcy

nieznany

używany

na żądanie

INNO32255

The line consists of one Juki KE-3020L pick-and-place machine, one Juki FX-3 pick-and-place machine, one Kurtz Ersa HOTFLOW 2/12 reflow soldering oven and one Kurtz Ersa stencil printer, 1) Juki KE-3020L pick-and-place machine, 2) Juki FX-3 pick-and-place machine, placement speed - optimum: 0.049s/chip (74,000CPH), placement speed - IPC9850: 60,000CPH, component size: 0402 (01005) to 33.5mm (or diagonal length up to 47mm), placement accuracy: +/-0.05mm (Cpk ≥ 1), max. feeder inputs: 120 with 8mm tape feeders, max. PCB size: 50-410x50-360mm, length: 1650mm, width: 2650mm, height: 1530mm, weight: 3.28t, 3) Kurtz Ersa HOTFLOW 2/12 reflow soldering oven, conveyor system working width: 50-500mm, working width with PCB center support: 60-500mm, PCB clearance: +35/-20mm, conveyor speed: 20-200cm/min, conveyor height above floor: 820-950mm, pin and chain conveyor: 5mm edge clearance, cooling zone: water recooling system, 2 upper cooling modules, cooling medium: water / air, ambient temperature: 10-35°C, process length: 2450mm, heating zone: 1650mm, cooling zone: 800mm, inlet zone: 700mm, outlet zone: 700mm, process chamber width: 700mm, length: 3890mm, width: 1390mm, height: 1370-1500mm, weight: 1.4t, 4) Kurtz Ersa stencil printer. An on-site inspection is possible.

Linia montażowa

Juki KE-2070/ KE-2080

Niemcy

nieznany

używany

na żądanie

INNO32252

The line consists of one Juki KE-2070 pick-and-place machine, one Juki KE-2080 pick-and-place machine, one Juki RS-800 reflow soldering oven and a cooling unit (chiller), 1) Juki KE-2070 pick-and-place machine, permissible component height SC: 6mm, NC: 12mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 2) Juki KE-2080 pick-and-place machine, permissible component height NC: 12mm, HC: 20mm, EC: 25mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 3) Juki RS-800 8-zone reflow soldering oven, number of heating zones: top 8, bottom 8, heating zone length: 3121mm, number of cooling zones: top 2, cooling zone length: 800mm, exhaust air volume: 10m³/min x2 exhaust connections, heat-up time: approx. 25min, temperature setting range: room temperature to 300°C, temperature control: closed-loop PID control + SSR, PCB width: 50-450mm, transport height: 950mm +/-20mm, transport speed: 300-2000mm/min, chain lubrication: automatic lubrication, cooling method: forced-air cooling, connected load: 64kW, power consumption during start-up: approx. 35kW, power consumption during normal operation: approx. 8.5kW, length: 5314mm, width: 1417mm, height: 1524mm, weight: 2.25t, 4) Cooling unit (chiller). An on-site inspection is possible.

Piec do lutowania reflow

Ersa Hotflow 3/20

Niemcy

2012

używany

na żądanie

INNO32230

Two identical reflow soldering ovens with different years of manufacture (2008/2012) are offered. Working width: 45mm-516mm, clear passage height top/bottom: 35mm/37mm, max. conveyor speed: 2m/min, drive: pin chain conveyor, heated/cooled process zone: 3725mm/1115mm, heating cassettes: 20, control: PLC. Machine dimensions X/Y/Z: approx. 6265mm/1201mm/1375mm, weight: approx. 1900kg. Inspection possible by arrangement.

Drukarka szablonowa

Ekra X5-Prof

Niemcy

2011

używany

na żądanie

INNO32149

Offered is a fully automatic EKRA screen and stencil printing system. Max. print format X/Y: 508mm/508mm, min. print format X/Y: 80mm/50mm, max. frame size X/Y: 740mm/740mm, substrate thickness range: 0.5mm-6mm, max. squeegee speed: 200mm/s, squeegee pressure range: 10N-250N, repeatability: +/-12.5µm, 6 Sigma, cycle time: 8s + printing time. Including solder paste height inspection, 2.5D SPI and fixtures for VarioGrid support bars as well as iPAG dispensing system. The machine was serviced in April 2025. Machine dimensions X/Y/Z: approx. 1140mm/1866mm/1503mm, weight: 980kg. Documentation available. Inspection possible by appointment.

Maszyna do wytrawiania

Pill Export 650

Niemcy

2009

używany

na żądanie

INNO32026

Industrial Pill etching machine from a printed circuit board manufacturing facility. Process stages: infeed section, etching chamber, replenisher, 4-stage cascade rinse, drying and outfeed section, max. working width: 650mm, PCB thickness: 0.1mm-3.2mm, conveyor speed: 0.5m/min-5.0m/min, max. process temperature: 55°C. Including a magnetic centrifugal pump for the etching chamber, one tank X/Y: 3500mm/2200mm and one Lantronic stacker. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1300mm. An on-site inspection is possible.

Maszyna do wytrawiania

Pill Export 550

Niemcy

1989

używany

na żądanie

INNO32025

An industrial etching machine from a printed circuit board manufacturing facility for the alkaline development of photoresists is offered. Process sequence: infeed, etch chamber, replenisher, 3-stage rinse, drying and outfeed, max. working width: 550mm, printed circuit board thickness range: 0.2mm-4.0mm, conveyor speed: 0.4m/min-2.5m/min. Including a Nubal unstacker, a drip tray X/Y: 3900mm/1600mm and a 200l dosing unit with agitator. Machine dimensions X/Y/Z: approx. 4000mm/1300mm/1400mm. An on-site inspection is possible.

Zakład wytrawiający

Pill Export 650

Niemcy

2008

używany

na żądanie

INNO32024

An industrial Pill micro-etching machine for the micro-etching of printed circuit boards (PCBs) from a PCB manufacturing facility. is offered. Process steps: infeed, micro-etching, rinsing, drying and outfeed, max. working width: 650mm, PCB thickness range: 0.1mm-3.2mm, feed speed: 0.5m/min-3.5m/min, machine dimensions X/Y/Z: approx. 2600mm/1400mm/1300mm. Including a Dataco stacking unit. Documentation available. On-site inspection is possible.

Maszyna CNC do wiercenia i frezowania płytek drukowanych

Lenz

Niemcy

1995

używany

na żądanie

INNO32016

4 Lenz CNC PCB drilling and routing machines are offered. 1) One CNC vertical PCB drilling and routing machine, Lenz LGX 460-2AL, year of manufacture: 1995, travel X/Y: approx. 550mm/460mm, rapid traverse X/Y: approx. 40m/min, max. drilling rate Z-axis: approx. 500strokes/min, spindles: Precise SC53H, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 308, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit and a loader. Overall dimensions of the base machine X/Y/Z: approx. 1650mm/1700mm/2250mm, additional length of the loader unit: approx. 820mm. 2) One CNC vertical PCB drilling and routing machine, Lenz GX 460-2, year of manufacture: 1989, travel X/Y: approx. 550mm/460mm, number of spindles: 2, rapid traverse X/Y: approx. 15m/min, max. stack height Z-axis: approx. 10mm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 45.00, equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2100mm/1450mm/1800mm. 3) One CNC vertical PCB drilling and routing machine, Lenz GX 600-1, year of manufacture: 1991, travel X/Y: approx. 650mm/600mm, number of spindles: 1, rapid traverse X/Y: approx. 15m/min, spindle: Precise SC63, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2000mm/1500mm/1800mm. 4) One compact CNC vertical PCB drilling and routing machine, Lenz TB 500-1, travel X/Y: approx. 475mm/390mm, number of spindles: 1, rapid traverse X/Y: approx. 10m/min, spindle speed: approx. 15000rpm, tool holder: 3mm, control: SIEB & MEYER CNC 35.00. Equipped with a cooling unit and a spare control unit, overall dimensions X/Y/Z: approx. 1500mm/1100mm/1520mm. The machines can be purchased individually or as a package. Inspection possible by appointment.

Drukarka szablonowa

Ekra X5 Prof

Niemcy

2012

używany

na żądanie

INNO31985

Two identical Ekra stencil printers, both fully overhauled in 2026, are available. Year of manufacture: 2009/2012, overhaul: 2026/2026, min. printing area X/Y: 80mm/50mm, max. printing area X/Y: 508mm/508mm, substrate thickness range: 0.5mm-6mm, max. substrate weight: 2kg, min. stencil dimensions X/Y: 450mm/450mm, max. stencil dimensions X/Y: 740mm/740mm, repeat accuracy at 6 Sigma: +/-12.5µm, squeegee speed: 200mm/s, squeegee pressure: 10kN-250kN, snap-off min./max.: -1.5mm/6mm, separation distance: 0mm-3mm, separation speed: 100mm/s, transport height range: 830mm-950mm, machine dimensions X/Y/Z: approx. 1150mm/1900mm/1550mm, weight: approx. 750kg. Including operator computer, steel squeegees, accessories, EVA Vision System and automatic stencil cleaner. Documentation available. On-site inspection is possible.

Maszyna do układania

Mycronic MY200LX-10

Niemcy

2017

używany

na żądanie

INNO31969

Offered for sale is a Mycronic SMT placement machine. Max. placement capacity: 16000components/h, IPC net throughput: 13800components/h, placement system: HYDRA, placement tools: 8, max. component dimensions X/Y/Z: 56mm/56mm/15mm, max. component weight: 140g, min. PCB size X/Y: 70mm/50mm, max. PCB size with T3 X/Y: 443mm/508mm, min./max. PCB thickness: 0.4mm/6mm, max. PCB weight with T3: 5kg, feeder capacity with T3: 112 × 8mm feeder positions, conveyor height range: 880mm-975mm, operating hours: approx. 6871h, placement time: approx. 2983h. Machine dimensions X/Y/Z: approx. 2690mm/2229mm/1446mm, weight: approx. 1400kg. Inspection possible by appointment.

Maszyna do lutowania w oparach

Ibl SLC504

Niemcy

2005

używany

na żądanie

INNO31857

A vapor phase soldering system IBL is offered for processing SMT printed circuit boards and electronic assemblies. Soldering format X/Y: approx. 530mm/330mm, max. printed circuit board format: 540mm/307mm/50mm, medium filling: approx. 15kg, water connection: 1/2 inch, min./max. water pressure: approx. 2.5bar/4bar. Dimensions: approx. 1190mm/1760mm/1320mm, weight: approx. 500kg. Inspection by appointment possible.

Piec komorowy

Wmu Fibex Combi M-20/40/375-94E

Niemcy

2017

używany

na żądanie

INNO31826

A WMU projection brazing furnace, originally built in 1997, but completely refurbished and overhauled in 2017, is available. Heated length: 3750mm, max. operating temperature: 1150°C, heating zones: 4, heating elements: CRFeAl grade, heating capacity: 94kW, usable width: 400mm, usable height: 200mm, throughput: approx. 200kg/h, speed min./max.: 100mm/400mm/min, overall system dimensions X/Y/Z: approx. 19600mm/1900mm/3000mm, control system: PLC. Including an additional muffle, heating elements, conveyor belt and cooling segments. Documentation available. An on-site inspection is possible.

Maszyna CNC do wiercenia i frezowania płytek drukowanych

Pluritec Multistation V3

Niemcy

1998

używany

na żądanie

INNO31797

A CNC PCB drilling and milling machine for PCB manufacturing is available. Stations: 2, Speed: 125000rpm, Collet: 3.175mm, Tool diameter range: 0.1mm-6.35mm, Working dimensions X/Y: 630mm/765mm, Positioning accuracy: 5µm, Repeatability: 4µm, Rapid traverse: 25m/min. Documentation available. An on-site inspection is possible.

Piec do lutowania reflow

Rehm VXC basic 2450 Typ 523/VXC basic 2100 Typ 422

Niemcy

2015

używany

na żądanie

INNO31717

Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026.

Stół montażowy

Asco RSAB/SSAB

Niemcy

nieznany

używany

na żądanie

INNO31705

An Asco Rail assembly and disassembly stand for brake slack adjusters with a functional testing device is available. Operating pressure: 6bar, max. test force: 100kN, cylinder stroke: 300mm. Documentation available. An on-site inspection is possible.

Maszyna do układania

Mimot Advantage MP 1260.2-27

Niemcy

2004

używany

na żądanie

INNO31683

An Mimot SMD placement machine is available. Infeed height: 888mm, max. component dimensions X/Y: 55mm/55mm, max. component height: 10mm, placement accuracy at Sigma 4: 35µm, repeatability at Sigma 4: 10µm, angular accuracy at Sigma 4: 0.07°, placement rate according to IPC: approx. 14400components/h, min. PCB dimensions X/Y: 50mm/500mm, max. PCB dimensions X/Y: 380mm/400mm, PCB thickness range: 0.5mm-4mm, maintenance: 02/2025. Machine dimensions X/Y: approx. 3100mm/1100mm, weight: approx. 1850kg. Including an extensive feeder package. Documentation available. An on-site inspection is possible.

Maszyna do cięcia z raklem

Seica Pilot V8 Auto-SW-001

Niemcy

2019

używany

na żądanie

INNO31426

A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible.

Stacja wprowadzania płytek drukowanych

Rg LPE-2M

Niemcy

2021

używany

na żądanie

INNO31353

A barely used allround PCB handling station RG Elektro-Technologie for loading purposes is available. Application possibility: before AOI/after AOI/combined, PCB transport height range: 930mm-970mm, min. PCB dimensions X/Y: 80mm/50mm, max. magazine dimensions X/Y/Z: 360mm/360mm/570mm, machine dimensions X/Y/Z: approx. 1200mm/1700mm/1800mm, weight: approx. 250kg, control: Siemens S7-1200. Documentation available. An on-site inspection is possible. The image is an example.

Stacja montażowa

Nutek NTM 530 WSL-1500-3(S)

Niemcy

2013

używany

na żądanie

INNO31056

An in-line workstation Nutek for PCB inspection and manual work is available. Component length range: 80mm-460mm, component width range: 50mm-407mm, component edge support: 3mm, component clearance top/bottom: 30mm/30mm, transfer height range: 925mm-975mm, conveyor speed: 14m/min, machine dimensions X/Y/Z: approx. 1500mm/1100mm/2200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible.