▷ Used automation technology from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Automation technology

Assembly systems 1 Manipulators 5 Other machinery 4 Placement technology 44 Positioning systems 1 Sorting device 1 Steerings 6

Innovac used-machines

Automation technology [1 - 20 of 62]

Vacuum Lifter

Tawi Vacu Easylift VM 160/2,5 STD

Germany

2016

used

on request

INNO29295

A multifunctional vacuum lifter Tawi is available. Load capacity: 60kg, lifting hose diameter: 160mm, lifting loop length: 2500mm, lifting height: 1800mm, suction feet: 2, suction surface X/Y: 120mm/320mm, yoke length: 400mm. Vacuum pump Siemens SA 350/2 IE2, vacuum: 630mbar, air flow rate: 230m³/h, pump dimensions X/Y/Z: 630mm/340mm/450mm. Documentation available. On-site inspection is possible.

Part Handling

Dmg Mori WH 10

Germany

unknown

used

on request

INNO29169

A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible.

Rod Magazine Feeder

Siemens PL EA 1

Germany

unknown

used

on request

INNO29132

Various spare parts are available for bar feeders that are used in SMD assembly lines to feed electronic components. 1-2) 2x Siemens PL EA 1 type 3 bar magazine feeders. 3-7) 5x Siemens PL EA type 3 bar magazine feeders. 8-11) 4x adapters for X-series feeder modules. The units are approx. 10 years old. Documentation available. On-site inspection is possible.

Stencil Printer

Dek Horizon 03l

Germany

2006

used

on request

INNO29125

A DEK inline stencil printer is available for SMT production. Print accuracy at 1.33 Cpk: +/-25µm, max. PCB dimensions X/Y: 508mm/508mm, print speed: 150mm/s, print force: 20kg, print gap: 0mm-6mm, stencil separation: 0mm-3mm, PCB thickness range: 0.2mm-6mm, max. PCB weight: 1kg, max. warpage including PCB thickness: 8mm, component ground clearance: 3mm-42mm, transfer height range: 840mm-980mm, stencil loading height range: 925mm-1065mm, machine dimensions X/Y/Z: approx. 2100mm/1500mm/1600mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

SMD Inspector

Saki Spider/BF-Frontier II

Germany

2008

used

on request

INNO29124

Two inspection machines for the semiconductor industry, specifically for PCB production, are available. 1) 3D solder paste inspection system Saki SPI-Spider, year of manufacture: 2007, inspection type: tomography, 2) automatic optical inspection system Saki AOI System BF-Frontier II, year of manufacture: 2008, resolution: 18µm, min. board dimensions X/Y: 60mm/50mm, max. board dimensions X/Y: 500mm/460mm, board warp: +/- 50mm. PCB dimensions X/Y: 500mm/460mm, PCB warp: +/-2mm, component clearance top/bottom: 40mm/40mm, rotation: 359°, transport height: 900mm, transport height adjustment: +/-20mm, machine dimensions X/Y/Z: approx. 850mm/1350mm/1250mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

PCB-Rotator

Nutek NTM 0410 TXL-1000-1 (P)

Germany

2018

used

on request

INNO29123

A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Destacker

Nutek NTM 220 DSXL-FW

Germany

2007

used

on request

INNO29122

A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Placement System

I-pulse (yamaha) M20

Germany

2012

used

on request

INNO29080

An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible.

Control Unit

Bäumer OFS HE3

Germany

2008

used

on request

INNO29074

A control unit for a Bäumer OFS HE3 horizontal contour cutting machine is available. The machine has been extended and the control unit has been left over. Machine dimensions X/Y/Z: approx. 1000mm/800mm/2000mm. Documentation available. On-site inspection is possible.

Pick and Place System

Dima HP-100

Germany

unknown

used

on request

INNO29019

Cycle time: 1.16s/QFP with Area CCD camera, 0. 85s/chip with Closed Loop Electromechanical Alignment, optimal placement rate: 3125 on IPC 9850 with Area SCC & LCC cameras, 4200 on IPC 9850 with CLEA, nominal placement rate: 2500-3500cph (components per hour), processable component types: 0201-Chip, MELF, SOT, SOIC, TSOP, TNT, PLCC, QFP, BGA, µBGA, LCC, field size: 42x42mm, fine pitch: Up to 0.4mm (16 mil), Tool change station: 12 nozzle positions, Heads: single gantry with two independently controlled pipettes, Assembly accuracy (X/Y) 3σ: 50µ with Area CCD camera,100µ with Closed Loop Electromechanical Alignment, PCB dimensions (X/Y): 30-330x30-450mm, PCB alignment: fiducial detection by ESI CorrectPlace® incl. Teach-in for drill holes or unusual contours, loading and alignment time: approx. 2.8s, number of axes: 2, length: 1700mm, width: 1500mm, height: 2200mm, weight: 450kg without feeder. On-site inspection is possible.

Pick and Place System

Dima Modulo MP-100

Germany

unknown

used

on request

INNO29018

Platinum thickness: 0.5-4.5mm, component height: top max. 16mm, bottom max. 30mm, components: Chip, MELF, SOT, SOIC, TSOP, PLCC, QFP, BGA, LCC, µBGA etc., Incremental axes X: 0.001mm, Y: 0.001mm, Z: 0.02mm, theta: 0.045°, connected load: 2500W, operating temperature: 18-30°C, control: microprocessor control with CAN interface, operated on PC with Windows® 7, vision system: ESI CorePlace®, automatic board alignment, complete component identification, inspection of solder pads, pin positions, component position, BGA ball count etc., weight: 700kg. On-site inspection is possible.

Automated Optical Inspection System

Vi Technology 5K SPECTRO

Germany

unknown

used

on request

INNO29017

Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible.

Infrared Reflow Oven

Sab Innotec ECO 160 IR

Germany

1994

used

on request

INNO28887

An IR reflow oven SAB is available. Voltage: 220V, current: 10A, power: 2.2kW, machine dimensions X/Y/Z: approx. 670mm/350mm/300mm, weight: approx. 30kg. On-site inspection is possible.

Feeder Trolley

Asm / Siplace

Germany

unknown

used

on request

INNO28798

A total of four feeder trolleys are available for ASM/Siplace. Documentation available. On-site inspection is possible.

Soldering System

Smt 1.2 TC N2

Germany

unknown

used

on request

INNO28745

A full convection reflow soldering system SMT with nitrogen support is available. Heating zones: 2, heating length: 1080mm, max. process temperature: 300°C, cooling type: air cooling, cooling length: 550mm, heating and stabilization time: 15min, conveyor width: 300mm, conveyor speed: 2m/min, max. component height: 80mm, total output: 15kW, machine dimensions X/Y/Z: approx. 2400mm/1000mm/1450mm. On-site inspection is possible.

Stacking and Destacking Machine

Kuttler Sue 50/RLE 160/CO 800

Germany

2008

used

on request

INNO28676

A stacker and destacker cutter for the PCB industry is available. 1) Stacker for slotted cassettes Kuttler SUE 50, year of construction: 2008, running direction: right-left, operating hours (plate counter): 2.8 million, weight: approx. 800 kg. 2) Single stacker for slotted cassettes Kuttler RLE 160, year of manufacture: 2004, with conveyor belt CO 800, year of manufacture: 2008, running direction: right-left, operating hours (plate counter): 5.4 million. The system is missing cylinders and brackets for automatic format adjustment. Documentation available. On-site inspection is possible.

Soldering Cabin

Pötter PK-IAT-L 1400

Germany

2011

used

on request

INNO28601

A soldering booth including extraction is available. Documentation available. On-site inspection is possible.

Dispensing Cell

Camelot Systems CAM/ALOT System 5000

Germany

1998

used

on request

INNO28581

A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible.

Optical Exposure System

Automatech/altix ZG 357/386

Germany

2004

used

on request

INNO28323

Two Automa-Tech (Altix) exposure machines are available for the PCB industry. 1) ZG 357, running direction: right-left, min. board dimensions X/Y: 530mm/385mm, max. board dimensions X/Y: 630mm/530mm, film dimensions X/Y: 685.8mm/584.2mm, UV burner power: 2x10kW, exposure: double-sided, cameras: 2/side, machine dimensions X/Y/Z: approx. 3650mm/2600mm/2450mm. 2) Contact platesetter ZG 386, min. plate dimensions X/Y/Z: 525mm/351mm/0.5mm, max. plate dimensions X/Y/Z: 635mm/533mm/4.5mm. The machine has a comprehensive and large spare parts package. Numerous spare parts are also available for the ZG series (not this machine). Documentation available. On-site inspection is possible. Individual sale of the machines or spare parts is possible.

Press-in Machine

Tyco P300

Germany

2001

used

on request

INNO28060

A Tyco (TE Connectivity) press-fit machine (insertion machine) is available. Insertion dimensions X/Y: 300mm/310mm, max. speed: 150mm/s, max. number of insertions: 15 million/year, insertion capacity: 4000-5000 pins/h. Machine dimensions X/Y/Z: approx. 2400mm/1600mm/1450mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.