▷ Używane maszyny drukarskie z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Maszyny drukarskie

Drukowanie etykiet, maszyny do sztancowania 10 Inne maszyny 18 Maszyny arkuszowe 1 Maszyny do dalszej obróbki 7 Maszyny do druku cyfrowego 12 Maszyny do druku fleksograficznego 3 Maszyny do druku offsetowego 2 Maszyny do druku wklęsłego 2 Maszyny do sitodruku 17 Maszyny do wkładania listów 5 Maszyny introligatorskie 5 Maszyny tampodrukowe 6 Przygotowanie do druku 4

Innovac maszyny-uzywane

Maszyny drukarskie [1 - 20 of 92]

System wysyłania wiadomości

Neopost SI 92

Niemcy

nieznany

używany

na żądanie

INNO32274

A complete mailing system with a second Neopost inserting station is offered. Max. inserting speed: 4300mail pieces/h, fold types: single fold/letter fold/zigzag fold/double parallel fold, max. folding capacity: 8sheets at 80g/m², max. thickness of a single document: 3.5mm, max. thickness of a fully compressed set: 5mm, max. feed units: 4, envelope hoppers: 2, document capacity per feed tray: max. 500sheets at 80g/m², max. envelope capacity: 800envelopes C5/6, document width: 130mm-230mm, document height: 90mm-340mm, paper weight: 45g/m²-170g/m², envelope width: 140mm-255mm, envelope length: 90mm-345mm, max. job memory: 9, dimensions X/Y: approx. 5031mm/720mm, weight: approx. 214kg. Documentation available. An on-site inspection is possible.

Maszyna do zszywania nicią

Smyth/freccia F120

Niemcy

2000

używany

na żądanie

INNO32178

Max. format X/Y: 320mm/520mm. Thread guiding from front and rear thread spools via thread guide rods, thread tensioning device and thread break monitoring, rear platform height-adjustable by handwheel, adjustable lateral support knives, adjustable signature stops for head and foot side, foot-side stop spring-loaded, signature delivery wheels with DC drive, speed continuously adjustable via potentiometer, lower delivery wheel stationary, upper delivery wheel oscillating, signature transport via adjustable transport chain with plastic transport elements, book delivery height-adjustable, lateral knives at the book delivery adjustable. Documentation available. Inspection possible by arrangement.

Maszyna do druku fleksograficznego

Windmöller & Hölscher ASTRAFLEX

Niemcy

2001

używany

na żądanie

INNO32177

Number of colors: 8, max. mechanical machine speed: 460m/min, gear pitch: 10mm, print length: 300-1200mm, max. print width with endless sleeve technology: 1270mm, max. print width without endless sleeve technology: 1250mm, max. material width: 1320mm, max. unwind roll diameter: 1000mm, max. rewind roll diameter: 1000mm, sleeve inner diameter: 76mm, sleeve outer diameter: 85mm, max. roll weight: 1,24t, web tension ranges, unwinding without draw: 40-350N, unwinding with draw: 25-350N, rewinding without slitter: 25-450N, rewinding with slitter: 30-450N, draw: 25-450N, suitable materials: LDPE, PP, PA: 20-150µm, HDPE, OPP: 12-100µm, max. laminated films: 120µm, paper: 30-120g/m². Equipment: unwinder, rewinder, control panel, corona treatment, Turboclean ink supply system, numerous printing cylinders, anilox rollers and additional accessories, with documentation. An on-site inspection is possible.

Suszarka tunelowa

M&r Economax D

Niemcy

nieznany

używany

na żądanie

INNO32132

Offered for sale is an M&R Economax D conveyor dryer. Heating capacity: 7.5kW, belt width: 610mm, heat chamber length: 1140mm. Dimensions X/Y/Z: approx. 2400mm/840mm/1350mm, weight: approx. 227kg. An inspection is possible by prior arrangement.

Plotery drukujące i tnące

Roland SG-540

Niemcy

nieznany

używany

na żądanie

INNO32131

A Roland printer/cutter is offered. Max. printing and cutting width: 1346mm, min./max. media width: 275mm/1371mm, max. media thickness for printing: 1.0mm, max. media thickness for cutting: 0.4mm, without liner: 0.22mm, max. cutting speed: 300mm/s, ink configuration: CMYK, blade force: 30-500gf, max. roll outside diameter: 210mm, max. roll weight: 30kg, core diameter: 50.8mm/76.2mm, max. print resolution: 900dpi, ink capacity: 500ml, weight: approx. 178kg. Inspection by prior arrangement is possible.

Maszyna do sitodruku

Esc Simplex S

Niemcy

1987

używany

na żądanie

INNO32090

A flatbed screen printing machine ESC is available. Print dimensions X/Y: 1200mm/800mm, max. print format: DIN A0, machine dimensions X/Y/Z: approx. 1550mm/1750mm/1200mm, weight: approx. 550kg. An on-site inspection is possible.

Urządzenia do naświetlania filmów i obrazów

Heidelberg Duosetter 4570

Niemcy

2000

używany

na żądanie

INNO32089

A Heidelberg imagesetter for prepress is available. Laser wavelength: 680nm, laser class: 1, max. positive format: 505mm/535mm, max. negative format: 505mm/545mm, scan line length: 505mm, max. screen frequency: 200lpi, repeatability: +/-5µm, max. output speed: approx. 1320mm/h, materials: RC paper/film/polyester printing plates, max. material thickness: 0.2mm. Machine dimensions X/Y/Z: approx. 1200mm/750mm/1100mm, weight: approx. 250kg. An on-site inspection is possible.

Ploter

Summa S 140 T

Niemcy

nieznany

używany

na żądanie

INNO32077

A Summa roll cutter from a textile factory is available. Pinch rollers: 4, media width range: 170mm-1450mm, maximum cutting width: 1350mm, media thickness range: 0.05mm-0.25mm, maximum tool force: 600g, perforation force: 250g, axis speed: 1m/s, resolution: 0.025mm. Machine dimensions X/Y/Z: approx. 2050mm/700mm/1150mm, weight: approx. 100kg. The machine has minor damage to the housing. Documentation available. An on-site inspection is possible.

Drukarka 3D

Hp Jet Fusion 3D 4200

Niemcy

2018

używany

na żądanie

INNO32067

An HP additive manufacturing system for PA12 nylon including accessories is available. Printing technology: Multi Jet Fusion, build volume X/Y/Z: 380mm/284mm/380mm, material: PA12 (Nylon 12), machine dimensions X/Y/Z: approx. 2250mm/1250mm/1450mm, weight: approx. 750kg, operating hours: approx. 16300h. Including HP powder processing station, 3x HP build units, 3x printheads, 2x heat lamps and 5x fusion lamps. Documentation available. An on-site inspection is possible.

Ploter

Konsberg i-XL20

Niemcy

2014

używany

na żądanie

INNO32053

A Kongsberg flatbed cutting and creasing plotter is available. Table dimensions X/Y: 1329mm/1834mm, working area X/Y: 1324mm/1624mm, max. speed: 50m/min, positioning accuracy: +/-0.2mm, repeatability: +/-0.05mm, material clearance: 50mm, max. tool force: 220kN, tool 1/2/3: drag knife/oscillating knife/creasing wheel, registration system: i-cut Vision Pro. Machine dimensions X/Y: approx. 2250mm/2000mm, weight: approx. 420kg, operating hours: approx. 250h. Documentation available. An on-site inspection is possible.

Maszyna do wykrawania i zamykania drutem

Swigraph/ibico E420C/EP28

Niemcy

nieznany

używany

na żądanie

INNO32027

Two small punching machines for crimping binding spines are available. 1) Swigraph E420C punching and wire closing machine, max. working width: 430mm, binding element diameter range: 4.7mm-31.75mm. 2) Two-piece Ibico EP28/HB28 plastic comb binding system, punching width: 420mm, max. punching capacity: approx. 35/min, max. binding capacity: 500 sheets, machine dimensions X/Y/Z: approx. 550mm/450mm/600mm, weight: approx. 65kg. Documentation available. An on-site inspection is possible.

Ploter

Oce/canon TDS 320

Niemcy

nieznany

używany

na żądanie

INNO32012

A repairable Océ/Canon large-format monochrome plotter requiring repair is available. Print resolution: 600dpi, max. print speed: 2.74m/min, max. print width: 914mm, max. paper size: A0, max. roll length: 152m, max. output length: approx. 15m, scan resolution: 400dpi. Machine dimensions X/Y/Z: approx. 1400mm/1050mm/1300mm, weight: approx. 200kg. The mechanical system is defective. Documentation available. An on-site inspection is possible.

Drukarka UV

Agfa Anapurna M2050

Niemcy

2015

używany

na żądanie

INNO32003

A digital Agfa UV large-format hybrid printing system is offered. Print resolution: 720dpi/1440dpi, max. print speed: 53m²/h, ink configuration: CMYK + lc + lm + white, max. media width: 2050mm, max. print width: 2000mm, max. media thickness: 45mm, max. board weight: 10kg/m². Machine dimensions X/Y/Z: approx. 4350mm/1470mm/1600mm, weight: approx. 1800kg. Including 4 nearly new tables for board printing and a workstation. The ink configuration is currently converted for traffic sign ink. Conversion back to standard CMYK is possible. An on-site inspection is possible.

Maszyna do sitodruku

Systec/esc 2-Farbenlinie

Niemcy

2017

używany

na żądanie

INNO31993

A Systec/ESC 2-color flatbed screen printing system is available. Processes: unwind unit, printing unit 1, intermediate module, printing unit 2, rewind unit. Unwind unit: Systec, intermediate module: Systec, rewind unit: Systec, printing units 1/2: ESC. Max. print format: 300mm/450mm, vacuum table dimensions X/Y: 400mm/600mm, vacuum surface dimensions X/Y: 345mm/465mm, max. frame dimensions X/Y: 500mm/750mm, print material thickness range: 0mm-50mm, working height: 945mm, printing speed: 500mm/s, max. cycle rate: 800pcs/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3. Machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. Documentation available. An on-site inspection is possible.

Drukarka cyfrowa

Konica Minolta Accuriopress C3080P

Niemcy

2019

używany

na żądanie

INNO31987

A Konica Minolta digital production printing system is available. Color system: CMYK, max. print speed A4: 80pages/min, print resolution: 1200dpi/1200dpi, max. paper dimensions X/Y: 330mm/487mm, max. paper size: SRA3+, max. print area: 323mm/480mm, max. paper weight: 350g/m², total page count: approx. 6.8million. Including 3 large-capacity paper trays, RU paper transfer unit, FS stapling and hole-punch unit, SD booklet finisher, and one large-capacity output tray. Documentation available. An on-site inspection is possible.

Drukarka cyfrowa

Konica Minolta bizhub PRESS 1250P

Niemcy

2015

używany

na żądanie

INNO31986

A Konica Minolta digital monochrome production printing system is available. Print resolution: 1200dpi/1200dpi, max. print speed per minute A4/A3: 120pages/70pages, grayscale: 256, max. paper dimensions X/Y: 324mm/483mm, max. paper size: SRA3, max. media weight: 350g/m². Machine dimensions X/Y/Z: approx. 3800mm/1100mm/1500mm, weight: approx. 1000kg, total counter: approx. 9.3 million. Including 3 large-capacity paper trays, RU paper transfer unit, FS stapling and hole-punch unit, and one large-capacity output tray. Documentation available. An on-site inspection is possible.

Maszyna do sitodruku

Atma ESC-AT-60PD

Niemcy

2017

używany

na żądanie

INNO31954

A semi-automatic ATMA flat-bed screen printing machine is offered. Max. print size X/Y: 400mm/600mm, vacuum table dimensions X/Y: 500mm/700mm, max. screen frame size: 700mm/950mm, min./max. screen frame profile height: 25mm/54mm, max. substrate thickness: 120mm, working height: 940mm, screen frame lift: 300mm, min./max. printing speed: 125mm/s/750mm/s, control: PLC. machine dimensions X/Y/Z: 1300mm/1060mm/1600mm, weight: 485kg. Documentation available. Inspection possible by appointment. The terminology flat-bed screen printing machine, vacuum table, screen frame lift and PLC follows established industry usage.

Instalacja do suszenia promieniami UV

Gew E2C

Niemcy

2021

używany

na żądanie

INNO31935

A complete GEW UV curing system for a Gallus Labelmaster LM 440 is offered. Max. UV output: 140W/cm, UV lamp housings: 11, including 9 housings with lamps and 2 housings for screen printing modules, Operating hours: approx. 2900h/lamp, HMI: for 10 stations, Control system: GEW RHINO HMI. Including 2 RHINO control cabinets, 2 fans, a complete exhaust duct system and mounting kit for the Gallus Labelmaster LM 440. An on-site inspection is possible.

Maszyna tampodrukowa

Printing International TO/324 PA

Niemcy

nieznany

używany

na żądanie

INNO31913

Offered is a single-color pad printing machine by Printing International. Cliché size: 100mm/100mm, max. workpiece size: approx. 130mm/170mm, max. print image diameter: approx. 60mm, max. pad stroke: 100mm, max. output: 1200cycles/h. The machine is pneumatically operated with an open ink well system. Viewing by appointment is possible.

Wytłaczarka

Gietz/polygraph Presto / 781/1L50 RF

Niemcy

1960

używany

na żądanie

INNO31912

One Gietz platen die-cutting and embossing press and one Polygraph free-arm wire stitching machine are offered. 1) One Gietz Presto platen printing, die-cutting and embossing machine, max. paper size X/Y: approx. 320mm/480mm, frame size X/Y: approx. 320mm/460mm, working area X/Y: approx. 350mm/480mm, max. paper size without additional equipment: approx. 330mm/470mm, capacity: approx. 2500strokes/h, flywheel revolutions per stroke: 8, flywheel diameter: approx. 725mm, flywheel width: approx. 50mm, working height: approx. 900mm, weight: approx. 1100kg. Inspection possible by prior arrangement. 2) Polygraph 781/1L50 RF free-arm wire stitching machine, year of manufacture: 1960, number of stitching heads: 1, max. stitching thickness: approx. 8mm, stitching arm length: approx. 500mm, front stitching arm width: approx. 10mm, inside staple crown length: approx. 12mm, max. stitching capacity: approx. 250stitches/min. Inspection possible by prior arrangement.