UV Dryer

Lc UV4000

Germany

unknown

used

on request

INNO32617

Pass-through width: 320mm, max. conveyor speed:20m/min, UV lamp power: 4kW, generator power: 5kW. machine dimensions X/Y/Z: approx. 2650mm/800mm/1750mm, weight: approx. 350kg.

more

Ink Jet Printer

Linx 8910

Germany

2018

used

on request

INNO32615

Two identical inkjet printers are available, printhead: Mk11 Midi, nozzle size: 62µm, supported print lines: 1, 2 or 3, character height: 1.8-20mm, max. printing speed for 1 line, 5-pixel character height: 6.25m/s (0.47mm dot spacing), 1 line, 7-pixel character height: 4.89m/s (0.55mm dot spacing), 2 lines, 7-pixel character height: 2.09m/s (0.37mm dot spacing), 3 lines, 7-pixel character height: 1.01m/s (0.37mm dot spacing), max. characters per second: 2,222, recommended printhead distance from product: 12mm, printhead distance for carton coding: 35mm, printhead length: 223mm, printhead diameter: 42mm, housing material: stainless steel, protection rating: IP55, operating temperature: 5-45°C, operating temperature with Linx 1240 ink: 0-50°C, max. relative humidity: 90%, power supply: 100-230V AC, rated power: 150W, upper length: 440mm, lower length: 400mm, width: 355mm, height: 503mm, weight including fluids and printhead: 24kg, an on-site inspection is possible.

more

Sheetfed Offset Press

Sakurai 466 SIP

Germany

2011

used

on request

INNO32605

Offered is a sheet-fed offset printing press with automatic perfecting device. Min. sheet size: 100 × 148mm. Max. printing area X/Y: 650mm/460mm. Printing speed: 4000-15000 sheets/h. Impression count: 21 million. Substrate thickness: 0.04-0.4mm. Printing plate size X/Y: 650mm/550mm. Printing plate thickness: 0.20-0.30mm. Rubber blanket size X/Y: 579mm/648mm. Rubber blanket thickness: 1.95mm. Gripper margin: approx. 10mm. Control system: Sakurai Interactive System. Inspection possible by arrangement.

more

Small-Character Inkjet Printer

Domino A300 SE

Germany

unknown

used

on request

INNO32602

Pinpoint nozzle size: 40µm, min. bend radius: 65mm, cartridge capacity: 825ml, housing material: 316 stainless steel, protection rating: IP55, operating temperature: 5-45°C, operating interface: Membrane keypad (membrane touch buttons), control system: Integrated control unit, printhead type: SureStart, relative humidity: 10-90%, power consumption: 200VA, dimensions: 245x475x725mm, weight: 36kg, an on-site inspection is possible.

more

Cylindrical Screen Printing Machine

Lc Printing LC-SU109UV

Germany

2018

used

on request

INNO32538

Max. printing capacity: 3600pcs/h, print format: 220mm/170mm, product diameter: 15mm-75mm, max. product height: 200mm, printing colors: 1, UV lamp power: 2.4kW. The image does not show the actual machine. Documentation available. Inspection possible by appointment.

more

Screen Printing Conveyor Dryer

Wps Panther 8420

Germany

unknown

used

on request

INNO32506

Offered for sale is a conveyor dryer with conveyor belt for screen printing applications. Equipped with enclosed drying tunnel, conveyor belt and connected exhaust ducting. Inspection possible by arrangement.

more

Carousel Screen Printing Machine

Schenk Spider EX 9/12er

Germany

2008

used

on request

INNO32505

Offered for sale is a carousel screen printing press with 12 pallet stations. Technical specifications: Printing pallets: 12, pallet dimensions X/Y: 430mm/700mm - 12 pieces, pallet dimensions X/Y: 320mm/700mm - 12 pieces, arm pallets for rotation X/Y: 150mm/810mm or 100mm/810mm - 12 pieces. Control system: Control panels with digital displays and control buttons. Equipped with pivoting printing arms, pallet supports and perimeter safety barrier. Inspection possible by arrangement.

more

Guillotine Cutter

Perfecta SEYPA 132 TV

Germany

unknown

used

on request

INNO32501

Offered for sale is a programmable guillotine cutter with electronic control system. Technical specifications: Cutting length of the original material: 75-1000mm, cutting width of the original material: 180-1000mm, processable paper grammage: 40-173g/m², minimum sheet length: 40mm, minimum sheet width: 40mm, maximum stack height: 80mm. Control system: SEYPA-TV with electronic control panel and program selection buttons. Equipped with large work table, side tables, material stop, foot control and rear material support area. Inspection possible by arrangement.

more

Guillotine Cutter

Perfecta ACMB 83

Germany

unknown

used

on request

INNO32500

Offered for sale is a paper cutting machine with mechanical cutting adjustment. Equipped with manually adjustable backgauge, handwheels, operating levers, material support table and foot control. Inspection possible by arrangement.

more

Silk Screen Printing Machine

Itw Morlock Gmbh MSC 100.2

Germany

2016

used

on request

INNO32484

Offered is a pad printing machine with protective enclosure. Equipped with plate holder, printing pads and remaining inks, where available. Operating usage: approx. 4000 cycles/year. Weight: approx. 400kg. Overall dimensions X/Y/Z: approx. 1300mm/1000mm/1790mm. Inspection possible by arrangement.

more

Small Character Inkjet Printer

Markem Imaje 9040 Contrast

Germany

unknown

used

on request

INNO32439

Printing up to 8 lines, max. print speed: 5.5m/s, character height: 1.2-18.2mm, automatic switching, degree of protection: IP54, temperature range: 0-50°C, relative humidity: 10-90%, frequency: 50/60Hz, connected load: 120VA, width: 452mm, height: 937mm, weight: 40kg. An on-site inspection is possible.

more

UV-LED Inkjet Web Printer

Agfa M3200i RTR 6C

Germany

2016

used

on request

INNO32433

Media width: 610-3200mm, max. print width: 3200mm, max. borderless print width with Mesh Kit: 3200mm, min. media thickness: 0.2mm, max. roll weight: 100kg, max. roll diameter: 360mm, max. speed in Express mode: 75m²/h, max. speed in Production mode: 38m²/h, max. speed in Standard mode: 30m²/h, max. speed in High Quality mode: 23m²/h, max. speed in High Definition mode: 18m²/h, positive text quality: 4pt, negative text quality: 6pt, required footprint: 7700x3000mm, length: 5960mm, width: 1650mm, height: 1980mm, weight: 3.5t, an on-site inspection is possible.

more

Industrial Ink Jet Printer

Hitachi UX-B160W

Germany

2022

used

on request

INNO32426

Equipment: photoelectric sensor for product detection, floor stand with printhead holder, status display, 3x 1l solvent, 1x 1l ink, cleaning unit, table, character height: 2-10mm, max. speed: 1,148characters/s, voltage: 100-120VAC/200-240VAC, phases: 1, frequency: 50/60Hz, current consumption: 1.2/0.6A, length: 400mm, width: 320mm, height: 527mm, weight: 27kg, operating hours: 155h, an on-site inspection is possible.

more

Converting Machine

Cartes Série GEMINI GE362VR

Germany

2016

used

on request

INNO32332

Equipment: 1) Cartes GE362VR finishing machine, infeed unit: servo-driven pneumatic 76mm clamping mandrel/expansion shaft, accommodates rolls up to 800mm in diameter or 150kg, automatic electronic web tension and roll diameter control with photocell, automatic stop function at end of material, electronic web guide with ultrasonic sensor for precise web control, splicing table with pneumatic clamps, adhesive tape dispenser, photocell for detecting print marks and any contrast points on pre-printed material, complete servo motor control of the material web, Vetaphone corona treatment system, flexo coating unit, fully rotary operation, equipped with laminating module, rotary flexo coating unit, UV dryer, specification in the source document: 24W/cm / 160W/cm, for laminating, printing or full-surface overcoating/coating, 2) Semi-rotary die-cutting unit with Image Distortion System (IDS) and Air Gap System (AGS): die-cutting system, magnetic cylinder, air-gap adjustment system, semi-rotary and fully rotary gearless die-cutting system, printing plate/die plate thickness range: 0.2-2mm, Image Distortion System (IDS), 3) Air Gap System (AGS), 4) outfeed unit, web control, complete servo motor control of the material web, slitting unit, 10 pivoting razor blades with lateral adjustment, additionally 8 knife/counter-knife cutting groups for longitudinal slitting, rewinding shafts, first rewinding shaft, independent servo-driven pneumatic 76mm expansion shaft, for rolls up to 800mm or 150kg, automatic web tension control, direction of rotation: clockwise/counterclockwise, with documentation. An on-site inspection is possible.

more

Screen Printing Machine

Mhm SYNCHRO PRINT 3000

Germany

unknown

used

on request

INNO32325

Two identical screen printing machines are available, max. frame dimensions: 750x1100mm, compressed air connection: 8bar, indexer connected load: 2.5kW, squeegee connected load: 0.6kW, an on-site inspection is possible.

more

Large Format Inkjet Printer

Epson Stylus Pro 9900 / K162A

Germany

2010

used

on request

INNO32316

Printing technology: inkjet, ink technology: Epson UltraChrome HDR, color system: 11colors, max. printing resolution X/Y: 2880dpi/1440dpi, max. media format: 44inches/B0, media feed: roll paper/cut sheet, media thickness range: 0.08mm-1.5mm, interfaces: USB/Ethernet. Machine dimensions X/Y/Z: approx. 1864mm/667mm/1218mm, weight: approx. 116kg. An on-site inspection is possible.

more

Mailing System

Neopost SI 92

Germany

unknown

used

on request

INNO32274

A complete mailing system with a second Neopost inserting station is offered. Max. inserting speed: 4300mail pieces/h, fold types: single fold/letter fold/zigzag fold/double parallel fold, max. folding capacity: 8sheets at 80g/m², max. thickness of a single document: 3.5mm, max. thickness of a fully compressed set: 5mm, max. feed units: 4, envelope hoppers: 2, document capacity per feed tray: max. 500sheets at 80g/m², max. envelope capacity: 800envelopes C5/6, document width: 130mm-230mm, document height: 90mm-340mm, paper weight: 45g/m²-170g/m², envelope width: 140mm-255mm, envelope length: 90mm-345mm, max. job memory: 9, dimensions X/Y: approx. 5031mm/720mm, weight: approx. 214kg. Documentation available. An on-site inspection is possible.

more

Book Sewing Machine

Smyth/freccia F120

Germany

2000

used

on request

INNO32178

Max. format X/Y: 320mm/520mm. Thread guiding from front and rear thread spools via thread guide rods, thread tensioning device and thread break monitoring, rear platform height-adjustable by handwheel, adjustable lateral support knives, adjustable signature stops for head and foot side, foot-side stop spring-loaded, signature delivery wheels with DC drive, speed continuously adjustable via potentiometer, lower delivery wheel stationary, upper delivery wheel oscillating, signature transport via adjustable transport chain with plastic transport elements, book delivery height-adjustable, lateral knives at the book delivery adjustable. Documentation available. Inspection possible by arrangement.

more

Flexo Printing Machine

Windmöller & Hölscher ASTRAFLEX

Germany

2001

used

on request

INNO32177

Number of colors: 8, max. mechanical machine speed: 460m/min, gear pitch: 10mm, print length: 300-1200mm, max. print width with endless sleeve technology: 1270mm, max. print width without endless sleeve technology: 1250mm, max. material width: 1320mm, max. unwind roll diameter: 1000mm, max. rewind roll diameter: 1000mm, sleeve inner diameter: 76mm, sleeve outer diameter: 85mm, max. roll weight: 1,24t, web tension ranges, unwinding without draw: 40-350N, unwinding with draw: 25-350N, rewinding without slitter: 25-450N, rewinding with slitter: 30-450N, draw: 25-450N, suitable materials: LDPE, PP, PA: 20-150µm, HDPE, OPP: 12-100µm, max. laminated films: 120µm, paper: 30-120g/m². Equipment: unwinder, rewinder, control panel, corona treatment, Turboclean ink supply system, numerous printing cylinders, anilox rollers and additional accessories, with documentation. An on-site inspection is possible.

more

Tunnel Dryer

M&r Economax D

Germany

unknown

used

on request

INNO32132

Offered for sale is an M&R Economax D conveyor dryer. Heating capacity: 7.5kW, belt width: 610mm, heat chamber length: 1140mm. Dimensions X/Y/Z: approx. 2400mm/840mm/1350mm, weight: approx. 227kg. An inspection is possible by prior arrangement.

more

All Offers / Printing machines