▷ Używane maszyny drukarskie z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Maszyny drukarskie

Drukowanie etykiet, maszyny do sztancowania 11 Inne maszyny 18 Maszyny arkuszowe 1 Maszyny do dalszej obróbki 8 Maszyny do druku cyfrowego 13 Maszyny do druku fleksograficznego 3 Maszyny do druku offsetowego 1 Maszyny do druku wklęsłego 2 Maszyny do sitodruku 19 Maszyny do wkładania listów 5 Maszyny introligatorskie 5 Maszyny tampodrukowe 6 Przygotowanie do druku 4

Innovac maszyny-uzywane

Maszyny drukarskie [1 - 20 of 96]

Maszyna do sitodruku

Tic SFM-650 DHE

Niemcy

2021

używany

na żądanie

INNO32372

Supply voltage: 230V, current consumption: 1A. Including two printing tables, one vacuum table and one table without vacuum. The machine was used only lightly for approx. two years and is fully functional. Documentation available. An on-site inspection is possible.

Składarka

Eurofold T 435

Niemcy

2008

używany

na żądanie

INNO32370

A Eurofold T 435 folding machine in need of repair with a second unit for cross folding is offered. Main machine: A3 folding machine with 4 folding plates, second folding machine: A3 with 2 folding plates. Equipment: electric A3 folding plate set, counting and spacing unit, A2/A3 pile feeder, A3 angled conveyor, standard machine table, electric stream delivery, Becker compressor 25ccm, electric cross-fold folding plate set, L roller conveyor and cross-fold machine table. Motor, pumps, blower and electronics are technically in working order. The polyurethane on the rollers has leaked out, so the rollers must be replaced. Documentation available. Inspection by appointment possible.

Maszyna do dalszego przetwarzania

Cartes Série GEMINI GE362VR

Niemcy

2016

używany

na żądanie

INNO32332

Equipment: 1) Cartes GE362VR finishing machine, infeed unit: servo-driven pneumatic 76mm clamping mandrel/expansion shaft, accommodates rolls up to 800mm in diameter or 150kg, automatic electronic web tension and roll diameter control with photocell, automatic stop function at end of material, electronic web guide with ultrasonic sensor for precise web control, splicing table with pneumatic clamps, adhesive tape dispenser, photocell for detecting print marks and any contrast points on pre-printed material, complete servo motor control of the material web, Vetaphone corona treatment system, flexo coating unit, fully rotary operation, equipped with laminating module, rotary flexo coating unit, UV dryer, specification in the source document: 24W/cm / 160W/cm, for laminating, printing or full-surface overcoating/coating, 2) Semi-rotary die-cutting unit with Image Distortion System (IDS) and Air Gap System (AGS): die-cutting system, magnetic cylinder, air-gap adjustment system, semi-rotary and fully rotary gearless die-cutting system, printing plate/die plate thickness range: 0.2-2mm, Image Distortion System (IDS), 3) Air Gap System (AGS), 4) outfeed unit, web control, complete servo motor control of the material web, slitting unit, 10 pivoting razor blades with lateral adjustment, additionally 8 knife/counter-knife cutting groups for longitudinal slitting, rewinding shafts, first rewinding shaft, independent servo-driven pneumatic 76mm expansion shaft, for rolls up to 800mm or 150kg, automatic web tension control, direction of rotation: clockwise/counterclockwise, with documentation. An on-site inspection is possible.

Maszyna do sitodruku

Mhm SYNCHRO PRINT 3000

Niemcy

nieznany

używany

na żądanie

INNO32325

Two identical screen printing machines are available, max. frame dimensions: 750x1100mm, compressed air connection: 8bar, indexer connected load: 2.5kW, squeegee connected load: 0.6kW, an on-site inspection is possible.

Drukarki atramentowe wielkoformatowe

Epson Stylus Pro 9900 / K162A

Niemcy

2010

używany

na żądanie

INNO32316

Printing technology: inkjet, ink technology: Epson UltraChrome HDR, color system: 11colors, max. printing resolution X/Y: 2880dpi/1440dpi, max. media format: 44inches/B0, media feed: roll paper/cut sheet, media thickness range: 0.08mm-1.5mm, interfaces: USB/Ethernet. Machine dimensions X/Y/Z: approx. 1864mm/667mm/1218mm, weight: approx. 116kg. An on-site inspection is possible.

System wysyłania wiadomości

Neopost SI 92

Niemcy

nieznany

używany

na żądanie

INNO32274

A complete mailing system with a second Neopost inserting station is offered. Max. inserting speed: 4300mail pieces/h, fold types: single fold/letter fold/zigzag fold/double parallel fold, max. folding capacity: 8sheets at 80g/m², max. thickness of a single document: 3.5mm, max. thickness of a fully compressed set: 5mm, max. feed units: 4, envelope hoppers: 2, document capacity per feed tray: max. 500sheets at 80g/m², max. envelope capacity: 800envelopes C5/6, document width: 130mm-230mm, document height: 90mm-340mm, paper weight: 45g/m²-170g/m², envelope width: 140mm-255mm, envelope length: 90mm-345mm, max. job memory: 9, dimensions X/Y: approx. 5031mm/720mm, weight: approx. 214kg. Documentation available. An on-site inspection is possible.

Maszyna do zszywania nicią

Smyth/freccia F120

Niemcy

2000

używany

na żądanie

INNO32178

Max. format X/Y: 320mm/520mm. Thread guiding from front and rear thread spools via thread guide rods, thread tensioning device and thread break monitoring, rear platform height-adjustable by handwheel, adjustable lateral support knives, adjustable signature stops for head and foot side, foot-side stop spring-loaded, signature delivery wheels with DC drive, speed continuously adjustable via potentiometer, lower delivery wheel stationary, upper delivery wheel oscillating, signature transport via adjustable transport chain with plastic transport elements, book delivery height-adjustable, lateral knives at the book delivery adjustable. Documentation available. Inspection possible by arrangement.

Maszyna do druku fleksograficznego

Windmöller & Hölscher ASTRAFLEX

Niemcy

2001

używany

na żądanie

INNO32177

Number of colors: 8, max. mechanical machine speed: 460m/min, gear pitch: 10mm, print length: 300-1200mm, max. print width with endless sleeve technology: 1270mm, max. print width without endless sleeve technology: 1250mm, max. material width: 1320mm, max. unwind roll diameter: 1000mm, max. rewind roll diameter: 1000mm, sleeve inner diameter: 76mm, sleeve outer diameter: 85mm, max. roll weight: 1,24t, web tension ranges, unwinding without draw: 40-350N, unwinding with draw: 25-350N, rewinding without slitter: 25-450N, rewinding with slitter: 30-450N, draw: 25-450N, suitable materials: LDPE, PP, PA: 20-150µm, HDPE, OPP: 12-100µm, max. laminated films: 120µm, paper: 30-120g/m². Equipment: unwinder, rewinder, control panel, corona treatment, Turboclean ink supply system, numerous printing cylinders, anilox rollers and additional accessories, with documentation. An on-site inspection is possible.

Suszarka tunelowa

M&r Economax D

Niemcy

nieznany

używany

na żądanie

INNO32132

Offered for sale is an M&R Economax D conveyor dryer. Heating capacity: 7.5kW, belt width: 610mm, heat chamber length: 1140mm. Dimensions X/Y/Z: approx. 2400mm/840mm/1350mm, weight: approx. 227kg. An inspection is possible by prior arrangement.

Plotery drukujące i tnące

Roland SG-540

Niemcy

nieznany

używany

na żądanie

INNO32131

A Roland printer/cutter is offered. Max. printing and cutting width: 1346mm, min./max. media width: 275mm/1371mm, max. media thickness for printing: 1.0mm, max. media thickness for cutting: 0.4mm, without liner: 0.22mm, max. cutting speed: 300mm/s, ink configuration: CMYK, blade force: 30-500gf, max. roll outside diameter: 210mm, max. roll weight: 30kg, core diameter: 50.8mm/76.2mm, max. print resolution: 900dpi, ink capacity: 500ml, weight: approx. 178kg. Inspection by prior arrangement is possible.

Maszyna do sitodruku

Esc Simplex S

Niemcy

1987

używany

na żądanie

INNO32090

A flatbed screen printing machine ESC is available. Print dimensions X/Y: 1200mm/800mm, max. print format: DIN A0, machine dimensions X/Y/Z: approx. 1550mm/1750mm/1200mm, weight: approx. 550kg. An on-site inspection is possible.

Urządzenia do naświetlania filmów i obrazów

Heidelberg Duosetter 4570

Niemcy

2000

używany

na żądanie

INNO32089

A Heidelberg imagesetter for prepress is available. Laser wavelength: 680nm, laser class: 1, max. positive format: 505mm/535mm, max. negative format: 505mm/545mm, scan line length: 505mm, max. screen frequency: 200lpi, repeatability: +/-5µm, max. output speed: approx. 1320mm/h, materials: RC paper/film/polyester printing plates, max. material thickness: 0.2mm. Machine dimensions X/Y/Z: approx. 1200mm/750mm/1100mm, weight: approx. 250kg. An on-site inspection is possible.

Ploter

Summa S 140 T

Niemcy

nieznany

używany

na żądanie

INNO32077

A Summa roll cutter from a textile factory is available. Pinch rollers: 4, media width range: 170mm-1450mm, maximum cutting width: 1350mm, media thickness range: 0.05mm-0.25mm, maximum tool force: 600g, perforation force: 250g, axis speed: 1m/s, resolution: 0.025mm. Machine dimensions X/Y/Z: approx. 2050mm/700mm/1150mm, weight: approx. 100kg. The machine has minor damage to the housing. Documentation available. An on-site inspection is possible.

Drukarka 3D

Hp Jet Fusion 3D 4200

Niemcy

2018

używany

na żądanie

INNO32067

An HP additive manufacturing system for PA12 nylon including accessories is available. Printing technology: Multi Jet Fusion, build volume X/Y/Z: 380mm/284mm/380mm, material: PA12 (Nylon 12), machine dimensions X/Y/Z: approx. 2250mm/1250mm/1450mm, weight: approx. 750kg, operating hours: approx. 16300h. Including HP powder processing station, 3x HP build units, 3x printheads, 2x heat lamps and 5x fusion lamps. Documentation available. An on-site inspection is possible.

Ploter

Konsberg i-XL20

Niemcy

2014

używany

na żądanie

INNO32053

A Kongsberg flatbed cutting and creasing plotter is available. Table dimensions X/Y: 1329mm/1834mm, working area X/Y: 1324mm/1624mm, max. speed: 50m/min, positioning accuracy: +/-0.2mm, repeatability: +/-0.05mm, material clearance: 50mm, max. tool force: 220kN, tool 1/2/3: drag knife/oscillating knife/creasing wheel, registration system: i-cut Vision Pro. Machine dimensions X/Y: approx. 2250mm/2000mm, weight: approx. 420kg, operating hours: approx. 250h. Documentation available. An on-site inspection is possible.

Maszyna do wykrawania i zamykania drutem

Swigraph/ibico E420C/EP28

Niemcy

nieznany

używany

na żądanie

INNO32027

Two small punching machines for crimping binding spines are available. 1) Swigraph E420C punching and wire closing machine, max. working width: 430mm, binding element diameter range: 4.7mm-31.75mm. 2) Two-piece Ibico EP28/HB28 plastic comb binding system, punching width: 420mm, max. punching capacity: approx. 35/min, max. binding capacity: 500 sheets, machine dimensions X/Y/Z: approx. 550mm/450mm/600mm, weight: approx. 65kg. Documentation available. An on-site inspection is possible.

Ploter

Oce/canon TDS 320

Niemcy

nieznany

używany

na żądanie

INNO32012

A repairable Océ/Canon large-format monochrome plotter requiring repair is available. Print resolution: 600dpi, max. print speed: 2.74m/min, max. print width: 914mm, max. paper size: A0, max. roll length: 152m, max. output length: approx. 15m, scan resolution: 400dpi. Machine dimensions X/Y/Z: approx. 1400mm/1050mm/1300mm, weight: approx. 200kg. The mechanical system is defective. Documentation available. An on-site inspection is possible.

Drukarka UV

Agfa Anapurna M2050

Niemcy

2015

używany

na żądanie

INNO32003

A digital Agfa UV large-format hybrid printing system is offered. Print resolution: 720dpi/1440dpi, max. print speed: 53m²/h, ink configuration: CMYK + lc + lm + white, max. media width: 2050mm, max. print width: 2000mm, max. media thickness: 45mm, max. board weight: 10kg/m². Machine dimensions X/Y/Z: approx. 4350mm/1470mm/1600mm, weight: approx. 1800kg. Including 4 nearly new tables for board printing and a workstation. The ink configuration is currently converted for traffic sign ink. Conversion back to standard CMYK is possible. An on-site inspection is possible.

Maszyna do sitodruku

Systec/esc 2-Farbenlinie

Niemcy

2017

używany

na żądanie

INNO31993

A Systec/ESC 2-color flatbed screen printing system is available. Processes: unwind unit, printing unit 1, intermediate module, printing unit 2, rewind unit. Unwind unit: Systec, intermediate module: Systec, rewind unit: Systec, printing units 1/2: ESC. Max. print format: 300mm/450mm, vacuum table dimensions X/Y: 400mm/600mm, vacuum surface dimensions X/Y: 345mm/465mm, max. frame dimensions X/Y: 500mm/750mm, print material thickness range: 0mm-50mm, working height: 945mm, printing speed: 500mm/s, max. cycle rate: 800pcs/h, fine adjustment: +/-10mm, squeegee angle adjustment: +/-9°, unwind roll diameter: 600mm, unwind roll spindle diameter: 3in, vacuum boxes: 3. Machine dimensions X/Y/Z: approx. 7900mm/1400mm/1950mm. Documentation available. An on-site inspection is possible.

Drukarka cyfrowa

Konica Minolta Accuriopress C3080P

Niemcy

2019

używany

na żądanie

INNO31987

A Konica Minolta digital production printing system is available. Color system: CMYK, max. print speed A4: 80pages/min, print resolution: 1200dpi/1200dpi, max. paper dimensions X/Y: 330mm/487mm, max. paper size: SRA3+, max. print area: 323mm/480mm, max. paper weight: 350g/m², total page count: approx. 6.8million. Including 3 large-capacity paper trays, RU paper transfer unit, FS stapling and hole-punch unit, SD booklet finisher, and one large-capacity output tray. Documentation available. An on-site inspection is possible.