Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [821 - 840 of 2661]

Kamera poklatkowa

Enlaps Tikee 3 Pro+

Niemcy

2023

używany

na żądanie

INNO29750

Two identical timelapse cameras Enlaps, one of them including an annual license, are available. Years of manufacture: 2023/2024, image sensors: 2, camera resolution: 12MP, single image resolution: 2x4608/3456 pixels, panorama resolution: 6K, combined field of view: 220°, min. capture interval: 30s, device dimensions X/Y/Z: approx. 210mm/180mm/70mm, weight: approx. 20kg. Both devices are equipped with reinforcement plates and mounting arms. The device manufactured in 2024 additionally includes a myTikee PRO Storytelling license. Documentation available. An on-site inspection is possible.

Jednostka ekstrakcyjna

Schmidt, Kranz & Co. Airator

Niemcy

nieznany

używany

na żądanie

INNO29748

A mobile welding fume extraction unit Schmidt & Kranz is available. Air flow rate: approx. 1800m³/h, power: 1.5kW. An on-site inspection is possible.

Maszyna do pakowania w folię

Kallfass Pack-Jet 2000

Niemcy

1991

używany

na żądanie

INNO29745

A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible.

Piła

Elumatec AKS 134

Niemcy

2001

używany

na żądanie

INNO29744

A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

Piła wieżowa

Miba TS 3

Niemcy

2018

używany

na żądanie

INNO29743

A tower saw including an installation platform is available. Tower segment and pipe diameter range: 4400mm-7500mm, power consumption: 50kW. SP axis (main spindle): drive: 41kW, speed: 160rpm, torque: 224Nm. Z-axis travel: 130mm, X-axis power: 4kW, X-axis torque: 26Nm, X-axis travel: 3250mm, X-axis feed: 2m/min, saw blade diameter: 450mm, saw blade thickness: 4.5mm, saw blade weight: 4000kg. Total system dimensions X/Y/Z: approx. 8000mm/3600mm/2200mm, weight: approx. 9700kg. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Chiron Mill 6000 High Speed

Niemcy

2004

używany

na żądanie

INNO29742

A machining center Chiron, which was completely overhauled in 2013, is available. Travel path X/Y: 6000mm/630mm, rapid traverse: 60m/min, tool positions: 92, tool holder: HSK-A63, speed: 12000rpm, torque: 140Nm, milling axes: 5, weight: approx. 20000kg, control: Siemens S840D, operating hours: 77344h. Includes scraper belt conveyor, OKZ preparation, Knoll VRF 250 vacuum rotary filter, high-pressure pump (70bar), emulsion mist extraction (2x800m³/h), central partition for pendulum machining, hydraulic unit (210bar), and Kohn linear clamping system with 8x hydraulic vices Multi 2000MFS 125/680 HD. Documentation available. An on-site inspection is possible.

Linia do powlekania

Oest EcoPur FFN 2500

Niemcy

2008

używany

na żądanie

INNO29741

A complete coating system for coating and further processing of panel material is available. 1) Single-component adhesive application system Oest Ecopur FFN 2500, year of manufacture: 2008, adhesive type: polyurethane, application area: panel and web coating. 2) Flatbed press Bürkle HSO 192, year of manufacture: 1978. The machine was completely overhauled in 2018, including control system and mechanics. 3) Guillotine shear Hüttenlocher & Schäfer HSK/G, year of manufacture: 2008. 4) Paternoster Schwab TU with a decoiling system, year of manufacture: 2008. 5) Covering table Otech ÜZT 1088, year of manufacture: 2019. Adhesive transport belt Haas SN 10100, year of manufacture: 2008. Documentation available. An on-site inspection is possible.

Wiertarka promieniowa

Wagner PRC 35

Niemcy

1988

używany

na żądanie

INNO29740

Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible.

Frezarka CNC

Maho MH 500 W

Niemcy

nieznany

używany

na żądanie

INNO29739

Travel path X/Y/Z: 500mm/380mm/350mm, table dimensions X/Y: 800mm/400mm, spindle taper: SK40, quill stroke: 50mm, speed: 5000rpm, rapid traverse: 4m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1800mm/2000mm/2000mm, weight: approx. 2000kg, control: Heidenhain CNC 432. An on-site inspection is possible.

Piekarnik pokładowy

Werner & Pfleiderer Matador MD 125/MDC 125

Niemcy

1986

używany

na żądanie

INNO29738

Two deck ovens Werner & Pfleiderer including two trolleys with peel devices are available. Heating capacity: approx. 90kW, decks: 5. Both machines were completely overhauled in 2017 – new insulation, steam system, water pans, and new Weishaupt gas burner. An on-site inspection is possible.

Maszyna do pakowania próżniowego z podwójną komorą

Multivac C500

Niemcy

nieznany

używany

na żądanie

INNO29737

Chamber depth: 750mm, sealing bar configuration 2x 650mm per chamber, built-in, electrical connection 3 x 400/415V 50Hz, 3 x 220V 60Hz, weight approx. 650kg (with 300m³/h vacuum pump), packaging speed approx. 2–3 cycles/minute. Length: 1600mm, width: 1055mm, height: 1045mm, weight: 650kg. An on-site inspection is possible.

Tokarka centralna

Tos SN 630 S

Niemcy

2001

używany

na żądanie

INNO29736

Distance between centers: 3000mm, swing over bed/cross slide/in bed gap: 630mm/350mm/880mm, spindle bore: 77mm, speed: 1600rpm, power: 7.5kW, tailstock: MT5, quill stroke: 250mm. Machine dimensions X/Y/Z: approx. 5050mm/1300mm/1450mm, weight: approx. 3500kg. Includes three-jaw chuck, fixed and travelling steadies, as well as a quick-change tool holder. An on-site inspection is possible.

Fotel zabiegowy

Ritter D 428 U/D 720/Piezoson

Niemcy

nieznany

używany

na żądanie

INNO29734

A treatment chair Ritter for a dental facility is available. Components: patient chair, dentist’s unit, assistant’s unit, operating lamp, spittoon, and ultrasonic scaler. The electronics have a problem. An on-site inspection is possible.

Centrum obróbcze CNC

Deckel Maho DMC 63 H

Niemcy

2002

używany

na żądanie

INNO29733

Travel path X/Y/Z: 630mm/630mm/560mm, tool holder: HSK-63A, tool positions: 60, pallets: 2, pallet dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 6600mm/6000mm/3200mm, weight: approx. 18000kg, control: Siemens Sinumerik, operating hours: approx. 24152. The machine has a system error - Runtime Error 285, Application oem4421 - and the PLC does not start up. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Toshiba BMC-63E

Niemcy

1991

używany

na żądanie

INNO29731

Pallet dimensions X/Y: 630mm/630mm, max. table load: 2x1200kg, travel path X/Y/Z: 1000mm/800mm/850mm, spindle speed: 5000rpm, spindle taper: BT50, spindle power: 15kW, tool positions: 60, rapid traverse: 15m/min, feed rate: 5m/min. Machine dimensions X/Y/Z: approx. 5400mm/3600mm/2900mm, weight: approx. 17500kg, control: Tosnuc T-800M. Documentation available. An on-site inspection is possible.

Szlifierka do powierzchni CNC

Wagner FSG 1640 HD III

Niemcy

2015

używany

na żądanie

INNO29730

Grinding length: 1000mm, grinding height: 370mm, magnetic plate dimensions X/Y: 1000mm/400mm, grinding wheel dimensions X/Y/Z: 355mm/30mm/127mm, speed: 1750rpm, machine dimensions X/Y/Z: approx. 4000mm/1750mm/1950mm, weight: approx. 3500kg, control: Chevalier. Documentation available. An on-site inspection is possible.

Przenośnik schodkowy

Köberlein A 800 2750

Niemcy

2002

używany

na żądanie

INNO29729

A step conveyor Köberlein & Siegert is available. Step width: 850mm, step height: 600mm, step depth: 5.5mm, machine depth: 1300mm, machine height: approx. 3500mm. An on-site inspection is possible.

Jednostka ekstrakcyjna

Teka Filtercube 2H

Niemcy

2019

używany

na żądanie

INNO29727

A filter system Teka is available. Air flow rate: 5000m³/h, motor power: 4kW, machine dimensions X/Y/Z: approx. 700mm/1000mm/2700mm. Includes control cabinet/control unit and a few folding pipes. Documentation available. An on-site inspection is possible.

Szlifierka

Carl Zeiss OVS 250

Niemcy

1990

używany

na żądanie

INNO29726

A precision glass grinding machine Carl Zeiss for pre-grinding optical workpieces is available. Workpiece spindle speed: 125rpm, tool spindle speed: 7000rpm, feed: 6mm/min, roundness and flatness accuracy: +/-0.005mm, swivel range: 50°, permissible repeatability: +/-0.01mm, measured repeatability (1990): +/-0.005mm. Documentation available. An on-site inspection is possible.

Szlifierki do wałków

Carl Zeiss HKM 063

Niemcy

1986

używany

na żądanie

INNO29725

An old precision cylindrical grinding machine Carl Zeiss is available. Includes numerous accessories and tools. An on-site inspection is possible.