Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [861 - 880 of 2570]

Rotator PCB

Nutek NTM 0410 TXL-1000-1 (P)

Niemcy

2018

używany

na żądanie

INNO29123

A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Destacker

Nutek NTM 220 DSXL-FW

Niemcy

2007

używany

na żądanie

INNO29122

A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Urządzenie do chłodzenia wody

Hyfra VWK 50/1-S

Niemcy

2005

używany

na żądanie

INNO29119

A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Cms Avant

Niemcy

1999

używany

na żądanie

INNO29117

A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.

Jednostka sterująca temperaturą

Gwk weco 09 A

Niemcy

2009

używany

na żądanie

INNO29116

Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes.

Wózek widłowy

Gangcha CQDB16

Niemcy

2023

używany

na żądanie

INNO29115

Load capacity: 1600kg, load center: 500mm, drive: electric, mast: Triplex, lifting height: 3600mm, fork length: 1200mm, fork carriage width: 902mm, turning radius: 1800mm, machine dimensions X/Y: approx. 2450mm/1050mm, operating hours: 62h. Documentation available. On-site inspection is possible.

Pompa próżniowa

Rietschle Twister VSB 120

Niemcy

2006

używany

na żądanie

INNO29114

Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.

Wózek wysokiego podnoszenia

Crown BDA-SP3000

Niemcy

nieznany

używany

na żądanie

INNO29113

An electrically driven Crown high-lift order picking machine in need of repair is available. Load capacity: 1250kg, lift height: 7010mm, wheelbase: 1245mm, travel speed: 8.8km/h, machine dimensions X/Y/Z: approx. 1000mm/1600mm/2100mm, weight: approx. 3850kg. The machine has a problem with its traction drive control (cannot be driven) and the batteries need to be charged. Documentation available. On-site inspection is possible.

Komora do suszenia

Matair EF 50 E

Niemcy

2004

używany

na żądanie

INNO29112

Capacity: 50kg, max. operating temperature: 400°C, heating capacity: 3kW, insulation thickness: 80mm, diameter: 710mm, height: 1175mm, weight: 75kg. Documentation available. On-site inspection is possible.

Giętarka trzpieniowa

Transfluid DB2060BK

Niemcy

2017

używany

na żądanie

INNO29111

Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Przenośnik ślimakowy

Rh

Niemcy

nieznany

używany

na żądanie

INNO29110

A stainless steel screw conveyor is available. Shaft diameter: 115mm, spiral outer diameter: 350mm, pitch: 180mm, total length: 4200mm. On-site inspection is possible.

Myjka do części

Perkute Clean-o-mat RC 82

Niemcy

2002

używany

na żądanie

INNO29106

Basket diameter: 790mm, usable height: 500mm, loading height: 930mm, max. basket load: 300kg, liquid volume: 150l, pump capacity: 1.5kW, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1200mm, weight: approx. 220kg. Documentation available. On-site inspection is possible.

Maszyna do nakładania kleju

H & H (hardo) TH 1300-V60 PU BV

Niemcy

2018

używany

na żądanie

INNO29105

Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Nakładarka kleju

Barberan MEN-H-1600

Niemcy

2017

używany

na żądanie

INNO29103

A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible.

Piła ukośnica

Berg & Schmid VKS 370 HA

Niemcy

2005

używany

na żądanie

INNO29096

Cutting range 90°: round material: 120mm, square material: 100mm/100mm, flat material: 180mm/100mm, cutting range 45° left: Round material: 120mm, square material: 100mm, flat material: 130mm/100mm, cutting range 60° left: Round material: 110mm, square material: 90mm/90mm, flat material: 90mm/100mm, cutting range 45° right: round material: 105mm, square material: 100mm/100mm, flat material: 130mm/100mm, motor power: 2.2kW, saw blade type: HSS 370, saw blade thickness: 3mm, saw blade width: 40mm, working height: 925mm, machine dimensions X/Y/Z: approx. 850mm/1100mm/2100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

System nacinania

Peddinghaus Ocean Liberator/SACM-1250/A

Niemcy

2019

używany

na żądanie

INNO29095

A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible.

Projektor profilowy

Mitutoyo/nikon PJ321F/V-12

Niemcy

nieznany

używany

na żądanie

INNO29093

Two old Mitutoyo and Nikon projectors are available. 1) Mitutoyo PJ321F, projection lens: 10x/20x/50x/100x, projection screen: 315mm, material: finely ground glass, rotation range: +/-360°, angle display: digital, resolution: 0.01°, contour illumination: +/-0.1%. 2) Nikon V-12, projection screen: 305mm, rotation range: 360°, lens compatibility: 10x/20x/50x/100x, resolution: +/-0.1%, max. workpiece height: 100mm, weight: approx. 80kg. On-site inspection is possible.

Wózek stołowy

Niemcy

nieznany

używany

na żądanie

INNO29092

A total of 37 table trolleys are available. On-site viewing is possible.

Boxmaker

Solarco BMC 17 DCP

Niemcy

2008

używany

na żądanie

INNO29089

A packaging cutting and creasing machine for Solarco corrugated board is available. Sheet width: 1700mm, max. sheet dimensions X/Y: 1700mm/4000mm, min. sheet dimensions X/Y: 300mm/600mm, single production output: 200-600 pieces/h, max. multiple production output: 2000 pieces/h, cardboard thickness range: 2mm-8mm, machine dimensions X/Y/Z: approx. 5500mm/4000mm/1900mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

Tokarka

Boehringer M 670 K

Niemcy

1970

używany

na żądanie

INNO29087

Rotation diameter over bed/plane slide: 690mm/415mm, center height: 335mm, spindle bore: 128mm, drive power: 22kW, speed: 1400rpm. Documentation available. On-site inspection is possible.