Używane maszyny z Niemiec - Strona 46

Tokarka centralna

Gornati Oreste & Co. LEGOOR 350

Niemcy

nieznany

używany

na żądanie

INNO31569

Centre height: 350mm, turning diameter: 700mm, spindle bore: 108mm, spindle speed: 13-1,000rpm. An on-site inspection is possible.

więcej

Tokarka uniwersalna CNC

Gildemeister CTX-400 S2

Niemcy

1999

używany

na żądanie

INNO31568

Fresh oil lubrication capacity: approx. 3l, voltage: 400V, frequency: 50Hz, fuse protection (slow-blow) according to VDE 0100: 80A, permissible voltage fluctuation at 400V: ±10%, connected load: 44kVA, length: 3210mm, width: 1750mm, height: 1750mm, weight: approx. 4.6t, with chip conveyor. An on-site inspection is possible.

więcej

Wieża filtracyjna

Novus Airtower FT 20.000

Niemcy

2018

używany

na żądanie

INNO31567

Motor power: 15kW, AC, max. air flow rate: 21,000m³/h, max. vacuum pressure: 1900Pa, dust container capacity: 200l, disposal drum Hobbock discharge: 2x35l, weight: 1590kg, colour: RAL5012 front / RAL9006, first filtration stage main filter, cartridge filter area: 222m², W3 nanocoated cartridge filter area: 151.8m², bag filter area: 24.8m², number of cartridge filters: 6, number of bag filters: 4, cartridge dust class according to DIN EN 60335-2-69: M, separation efficiency greater than 99.6%, second filtration stage filter area: 65m², filter area: 8m², length: 1756mm, width: 2066mm, air inlet into housing: from the top, side panels: high-tech polycarbonate, with documentation. An on-site inspection is possible.

więcej

Pionowe centrum obróbcze

Hurco VMX 64/40T

Niemcy

2003

używany

na żądanie

INNO31563

X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible.

więcej

Szlifierka powierzchniowa

Hahn & Kolb HK-ORION 635 NPC-K

Niemcy

nieznany

używany

na żądanie

INNO31562

Number of axes: 3, operating hours: unknown, with control system, belt filter, and extraction unit, without documentation or spare parts, not maintained on a regular basis, without maintenance records. An on-site inspection is possible.

więcej

Maszyna do odlewania ciśnieniowego

Frech DAK 315

Niemcy

1996

używany

na żądanie

INNO31561

Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: 0/-80/-160mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible.

więcej

Frezarka

Mikron WF 32CH/ TNC 355

Niemcy

nieznany

używany

na żądanie

INNO31558

X-axis: 600mm, y-axis: 600mm, z-axis: 450mm, infinitely variable speed range (vertical and horizontal): 10-6,300rpm, AC main spindle drive power at 44% duty cycle: 9kW, drive power at 100% duty cycle: 6kW, max. torque: 800Nm, braking: electrical, number of gearbox stages: 4, max. spindle torque at 44% duty cycle: 800Nm, tool holder: SK40/ DIN69871, retention knob: DIN69872 B, min. clamping force: 12,000N, min. unclamping force: 3,000N, clamping surface of angle table: 530x900mm, number of T-slots: 8, T-slot width: 14H7, T-slot spacing: 63mm, max. workpiece weight: 400kg, coolant tank capacity: 150l, flow rate: 20l/min, connected load: 15kW, with tool holders and documentation. An on-site inspection is possible.

więcej

Silnik stałoprądowy

Abb DMP 180-4LB

Niemcy

1998

używany

na żądanie

INNO31557

Standard: IEC 34-1, rated power: 114.7kW, rated speed: 1,885rpm, duty type: S1 (continuous duty), insulation class: H-RISE F, armature voltage (Arm.): 460V, armature current (Arm.): 271A, excitation voltage (Exc.): 340V, excitation current (Exc.): 5.43A, protection class: IP23S (drip-proof, open ventilated), cooling: IC06 (forced ventilation by mounted fan), mounting arrangement: IM1001 (B3 foot-mounted design), weight: 455kg, standardized dimensions (IEC frame size 180), shaft height (H): 180mm, foot mounting hole spacing width (A): 279mm, foot mounting hole spacing length (B): 279mm (L version), shaft diameter (D): 48mm (optional 55mm reinforced version), shaft extension length (E): 110mm, mounting hole diameter (K): 15mm, CE marking available. An on-site inspection is possible.

więcej

Pionowe 5-osiowe centrum obróbcze CNC

Kao Fong Machinery KFO-620-5AX

Niemcy

2019

używany

na żądanie

INNO31556

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible.

więcej

Sprężarka śrubowa

Renner RS 18,5

Niemcy

2016

używany

na żądanie

INNO31555

A compressor is offered. Drive power: 18.5kW, Delivery rate: 2910ltr/min, Max. operating pressure: 8bar. Dimensions X/Y/Z: approx. 1287mm/799mm/1296mm, Weight: approx. 540kg. Inspection possible by appointment.

więcej

Automatyczna prasa do proszku

Kemwall Engineering P6-5

Niemcy

2000

używany

na żądanie

INNO31553

Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible.

więcej

Ładowarka kołowa

Volvo L180D

Niemcy

2001

używany

na żądanie

INNO31552

Two identical Volvo L180D wheel loaders available, operating hours: approx. 30,000h, weight: 32.7t, engine type: Volvo TD 122 KHE, rated speed: 2100rpm, power SAE J1995 (gross): 209kW (284HP), power ISO 9249/SAE J1349 (net): 206kW (280HP), max. torque: at 900rpm, torque SAE J1995 (gross): 1580Nm, torque ISO 9249/SAE J1349 (net): 1580Nm, displacement: 12l, onboard voltage: 24V, batteries: 2x 12V, battery capacity: 2x 140Ah, cold cranking current per battery: 1050A, reserve capacity per battery: 290min, alternator: 1680W/60A, starter power: 6.6kW (9HP), operating weight: 26-29t. Equipment: engine: high-performance low-emission diesel engine, 6-cylinder inline design, direct injection, turbocharger, charge air cooling, 4-stroke, replaceable cylinder liners, air filtration system: three-stage, cooling system: hydrostatically driven fan with separate cooling circuit for the charge air cooler, torque converter: single-stage, transmission: Volvo HT 220 automatic powershift transmission with countershaft and single-lever control, shifting system: Volvo Automatic Power Shift Generation II (APS II) with driving mode selector, axles: Volvo axles with full-floating axle shafts and planetary hub reduction, cast steel axle housings, rigid front axle, oscillating rear axle, 100% differential lock on the front axle, transmission type: Volvo HT 220, torque multiplication: 2.27:1, braking system: wet disc brakes, fully enclosed, oil-cooled, externally mounted on the axles. An on-site inspection is possible.

więcej

Urządzenie do topienia kleju

Robatech Gluing Concept B 5/2

Niemcy

2016

używany

na żądanie

INNO31551

Tank capacity: 5l, melting capacity: 5kg/h, adhesive type: granules and blocks (thermoplastic), operating temperature: 20-200°C, heating-up time (160°C): approx. 30min, adhesive viscosity: 100-20,000mPas, heated hose connections: 1 to 4, filling: manual or automatic (RobaFeed 3), number of delivery pumps: 1, pump type: piston or gerotor pumps, supply voltage: 200-400V, 1-3 LNPE, connected load: 1.8kW, compressed air supply: 6bar, dry, oil-free, according to ISO 8573-1, class 4, electronics: CLS, operating panel: membrane keypad (TRM), integrated application control: Robatech ICS TRM 4, weight: 34kg, safety standard: CE, CSA. An on-site inspection is possible.

więcej

Autonomiczny pojazd transportowy

Gebhardt 810.11

Niemcy

2023

używany

na żądanie

INNO31549

Three identical transport vehicles available, year of manufacture: 2x 2021, 1x 2023. An on-site inspection is possible.

więcej

Frezarka CNC

Friedrich Deckel FP4 AT

Niemcy

1987

używany

na żądanie

INNO31545

Number of T-slots: 8, rated current: 23A, controls: CONTOUR 3, with tool magazine. An on-site inspection is possible.

więcej

Maszyna uszczelniająca

Wick Machinery VR-mp

Niemcy

2017

używany

na żądanie

INNO31541

Suitable for: screw caps, drop inserts, press-on caps, flip-top caps, cup-to-cup closures, pipettes, brushes, spray pumps, triggers, rubber stoppers, crimp caps, ROPP caps and other closure types, equipment: mechanical rotary indexing table, pneumatic cap feeders, closing station for 1 closure type, extraction connection, IBC including drip tray, continuously adjustable transition from the discharge arm, machine enclosure: stainless steel 1.4301 (AISI 304), max. output depending on bottle, fill level and closure type: 60 bottles/min, compressed air connection filtered, oil-free: 6bar, connected load: 1.5kW, power supply: 3x 400V, connection area height: 792mm, cable routing: 317mm, overall length: 4200mm, with documentation. An on-site inspection is possible.

więcej

Wiertarka rzędowa

Ibarmia B-70

Niemcy

nieznany

używany

na żądanie

INNO31539

Speed range: 51-966rpm, feeds: 0.30-0.60mm/rev, number of drilling heads: 3, spindle mount: MK5, with coolant unit, electromagnetic feed clutch, multi-speed gearbox, T-slot clamping plate, motorized height-adjustable heads and automatic spindle feed, without documentation. An on-site inspection is possible.

więcej

Pionowe centrum obróbcze CNC

Fair Friend Enterprise Co. VB715A FEELER

Niemcy

2003

używany

na żądanie

INNO31538

Number of axes: 3, max. speed: 6000rpm, compressed air connection: 6-8bar, main motor power: 20HP, control system: Fanuc Series 18-M, weight: 12t, without documentation. An on-site inspection is possible.

więcej

System spawania laserowego

Trumpf TruLaser-Robot 5020

Niemcy

2007

używany

na żądanie

INNO31537

Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 36.HL22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible.

więcej

Tokarka CNC ze skośnym łożem

Oerlikon Boehringer VDF 250 C-U

Niemcy

1985

używany

na żądanie

INNO31532

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

więcej