▷ Używane maszyny budowlane z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Maszyny budowlane

Dźwignice 1 Gąsienice 3 Inne maszyny 4 Koparka 1 Ładowarki 5 Narzędzia 1 Produkcja materiałów budowlanych 4 Rozdrabniarki 1 Sprężarki 1 Szlifowanie i cięcie 1 Technologia betonu i przygotowanie zaprawy 7 transport, platformy robocze 3 Urządzenia wiertnicze 3 Wywrotka 1

Innovac maszyny-uzywane

Maszyny budowlane [1 - 20 of 36]

Ładowarka kołowa

Caterpillar Inc. 966M XE

Niemcy

2021

używany

na żądanie

INNO32715

Bucket capacity: 2.5-9.2m³, operating weight: 23.22t, reference bucket: 4.2m³, max. speed: 39.5km/h, engine type: Cat C9.3 ACERT, max. net power (1,600rpm), ISO 9249: 222kW, max. gross torque (1,200rpm), ISO 14396: 1,708Nm, max. net torque (1,200rpm), ISO 9249: 1,618Nm, bore: 115mm, stroke: 149mm, displacement: 9.3l, emission standard: Stage IV, implement hydraulic pump type: variable displacement piston pump, max. pump flow (1,600rpm): 385l/min, max. operating pressure: 31,000kPa, fuel tank capacity: 313l, DEF tank (AdBlue): 16.8l, cooling system: 71.6l, crankcase: 24.5l, transmission: 63l, hydraulic tank: 125l, operating hours: 10,318h. An on-site inspection is possible.

Ładowarka kołowa

Volvo L180H

Niemcy

2018

używany

na żądanie

INNO32714

Max. static tipping load, straight: 23.67t, static tipping load at 35° steering angle: 21.01t, static tipping load at full steering angle: 20.71t, engine type: D13J 6-cylinder inline diesel engine, emission standard: Stage IV/Tier 4F, displacement: 12.8l, max. power (SAE J1995, gross): 246kW, max. power (ISO 9249, net): 245kW, engine speed at max. power: 1,300-1,400rpm, max. torque (gross): 2,030Nm, max. torque (net): 2,024Nm, engine speed at max. torque: 1,000rpm, economical operating range: 800-1,600rpm, air filtration: two-stage, cooling: hydrostatic, electronically controlled fan and charge air cooler, torque converter: single-stage, torque multiplication: 2.09:1, transmission: automatic, PWM-controlled, number of forward gears: 4, number of reverse gears: 4, max. speed: 38km/h, front axle: Volvo/AWB 40B/40C, rear axle: Volvo/AWB 40B/40B, rear axle oscillation angle: ±15°, ground clearance during oscillation: 610mm, operating hours: 10,072h, an on-site inspection is possible.

Wywrotka

Caterpillar Inc. 725C2

Niemcy

2019

używany

na żądanie

INNO32713

Max. payload capacity: 24t, SAE turning radius: 7.47m, gross engine power: 239kW, heaped body capacity: 15m³, max. speed: 55km/h, wheelbase between front and middle axles: 3979mm, axle spacing between middle and rear axles: 1700mm, overall length: 10.547m, width: 2.95m, max. height: 3.779m, gross vehicle weight when loaded: 47.04t, empty weight: 23.04t, operating hours: 8,840h, an on-site inspection is possible.

Koparka przeładunkowa

Liebherr 924

Niemcy

nieznany

używany

na żądanie

INNO32531

Max. speed: 20km/h, weight: ca. 19.4t, on-site inspection is possible.

Wiertnica gąsienicowa

Geotec ROTOMAX XL-GTC

Niemcy

2021

używany

na żądanie

INNO32520

Engine: 4-cylinder turbo diesel engine, engine power: 140kW (190hp), drill mast: XL series, pullback force: 150kN, undercarriage: crawler undercarriage with 450mm wide rubber tracks, drilling drive: dual-head drilling gearbox. No known damage. Documentation available. Inspection possible by arrangement.

Walce drogowe / walce zagęszczające

Dynapac CX8 / CX8C / CC1200 / CC1400 / CC1400C

Niemcy

2025

używany

na żądanie

INNO32490

Offered is a package of nine Dynapac tandem and combi rollers. 1) Dynapac CX8 tandem roller, year of manufacture: 2025, operating hours: 350h. 2) Dynapac CX8 tandem roller, year of manufacture: 2026, operating hours: 58h. 3) Dynapac CX8C combi roller, year of manufacture: 2026, operating hours: 40h. 4) Dynapac CC1200 tandem roller, year of manufacture: 2024, operating hours: 10h. 5) Dynapac CC1200 tandem roller, year of manufacture: 2024, operating hours: 3h. 6) Dynapac CC1400 tandem roller, year of manufacture: 2025, operating hours: 3h. 7) Dynapac CC1400 tandem roller, year of manufacture: 2025, operating hours: 3h. 8) Dynapac CC1400 tandem roller, year of manufacture: 2025, operating hours: 4h. 9) Dynapac CC1400C combi roller, year of manufacture: 2025, operating hours: 21h. The rollers can be purchased separately. Documentation available. Inspection possible by arrangement.

Stacjonarna pompa do betonu

Putzmeister BSA 1004E

Niemcy

1994

używany

na żądanie

INNO32366

An on-site inspection is possible.

Żuraw wieżowy

König Krane K24

Niemcy

nieznany

używany

na żądanie

INNO32343

Max. lifting capacity: 2000kg, radius/lifting capacity: 20m/1000kg or 24m/650kg, hook height: 18m, max. hoisting speed: 45m/min, slewing speed: 1rpm, trolley travel speed: 30m/min, rail travel speed: 25m/min, slewing radius: 2.74m, support width: 4m, counterweight ballast: 9800kg, hoisting class: H1, load group: B3. Documentation available. An on-site inspection is possible.

Ładowarka teleskopowa Roto

Merlo Roto 40.26 MCSS

Niemcy

2013

używany

na żądanie

INNO32297

Operating hours: approx. 1550h, displacement: 6728cm³, power: 107kW, total weight: 16.5t. Including winch, work platform, high-pressure hose with reel, forks and lattice boom extension. A new rotary union is available as a spare part. An on-site inspection is possible.

Podnośnik roboczy z przyczepą

Genie TZ-34/20

Niemcy

2011

używany

na żądanie

INNO32229

An articulated aerial work platform in need of repair is offered. Working height: 12200mm, platform height: 10300mm, horizontal outreach: 5590mm, platform capacity: 200kg, platform for 2 persons, transport length: approx. 5000mm, transport width: approx. 1470mm, transport height: approx. 2010mm, permissible gross weight: 1454kg. A hydraulic valve is defective, a replacement part is available but has not yet been installed, therefore the outriggers are currently secured with straps. An on-site inspection is possible.

Platforma robocza

Airo X 12 RTD

Niemcy

2013

używany

na żądanie

INNO31999

An Airo scissor lift is offered. Working height: 12200mm, platform height: 10200mm, platform extension: 1500mm, load capacity: 450kg, drive: diesel, configuration: 4×4 with outriggers. Machine dimensions X/Y/Z: 2970mm/1700mm/2490mm, weight: approx. 3200kg. An on-site inspection is possible.

Linia produkcyjna do płytek ceramicznych

Belagsysteme Gmbh Sonderbau

Niemcy

nieznany

używany

na żądanie

INNO31915

Two custom-built machines for the automatic production of pre-grouted tile panels are available. Bonding material: two-component PU grout, max. production capacity: approx. 50m²/h, min. tile format: 97mm/97mm, max. tile format: 197mm/197mm, splitter plate format: 244mm/119mm. This is a complete production line up to the packaging stage. The PU pipes have become clogged after a long period of time and must be replaced. Including various spare parts. Documentation available. An on-site inspection is possible.

Betoniarka

Eirich R15

Niemcy

1984

używany

na żądanie

INNO31847

Three nearly identical Eirich intensive concrete mixers are expected to be available from January 2027. Years of manufacture: 1974/1974/1984, Volume: 500l, Max. filling weight: 655kg, Mixing pan speed: 36rpm, Rotor speed: 130rpm, Rotor tool diameter: 880mm. Documentation available. An on-site inspection is possible.

Zakład produkujący bloczki betonowe

Adler Delta 3000

Niemcy

1995

używany

na żądanie

INNO31803

A complete stationary concrete block production plant Adler is available. Components: stationary block machine/press unit, mixer, skip/feeding unit, material hopper, conveyor belts, height conveyor, pallet circulation system, pallet transport, palletizer, stacking and destacking units, strapping system, control system, hydraulic unit, silo, material feeding system, dosing unit, discharge. Output: 1500 cycles/day, output: 3000 pallets/h, operation: double-pallet operation, available concrete block format X/Y/Z: 500mm/200mm/250mm. The drying racks are made of wood and can no longer be used. The system has not been operated for 20 years and requires an overhaul. The system was operated from 1995 to 2005. Documentation available. An on-site inspection is possible. The system is located in Portugal.

Ładowarka kołowa

Wacker Neuson WL44

Niemcy

2021

używany

na żądanie

INNO31791

A Wacker Neuson wheel loader, ideally suited for agricultural purposes, is available. Engine: Deutz TD 2.9 L4 S5, Power: 61hp/45kW, Displacement: 2900cm³, Emission standard: Stage V, Exhaust aftertreatment: DOC/DPF, Max. engine speed: 2300rpm, Max. tipping load: 3300kg, Standard bucket capacity: 0.8m³, Max. working hydraulic pressure: 220bar, Max. travel hydraulic pressure: 450bar, Fuel tank: 82l, Kinematics: Z, Articulation angle: 44°, Oscillation angle: +/-12°, Max. dump height: 2430mm, Lifting force: 41.36kN, Outside turning radius: 3870mm, Tires: 405/70 R20. Transport dimensions X/Y/Z: approx. 4800mm/1850mm/2550mm, Operating weight: approx. 4600kg, Operating hours: approx. 1382h. Including 1200mm pallet forks, FEM II rotating fork positioner, road approval and hydraulic Z-HV quick coupler. The engine or the control system of the windshield washer system has a defect. Documentation available. An on-site inspection is possible.

Spychacz

Massey Ferguson D 400 LC

Niemcy

1977

używany

na żądanie

INNO31712

Operating hours: 4280h, Track shoe width: 550mm, Track gauge: 1520mm, Track contact length: 2090mm, Undercarriage length: 2080mm, Blade width: 3000mm, Machine dimensions X/Y/Z: approx. 52050mm/1900mm/1850mm, Weight: approx. 10000kg. An on-site inspection is possible.

Kontener sanitarny

Moravia Containers Doppelausführung

Niemcy

nieznany

używany

na żądanie

INNO31635

A combined sanitary container unit, consisting of two containers, presumably of the Czech make Moravia Containers or Containex, is available. Container exterior dimensions X/Y/Z: approx. 6060mm/2440mm/2840mm, interior height: 2500mm, protective primer: epoxy, insulation: mineral wool, floor traffic load: 2500N/m², exterior sheet metal thickness: 0.5mm, corrugation depth: 10mm, urinal: 6, cubicles: 6, washbasins: 5, electric heating convectors: 2, under-sink units: 5. The unit is designed for simple and quick disassembly and reassembly. The two containers must be separated during transport. Documentation available. An on-site inspection is possible.

Układ hydrauliczny

Atlas Copco LP 9-20 P/LH 190 E

Niemcy

2014

używany

na żądanie

INNO31390

A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible.

Szlifierka powierzchniowa

Wassmer DFS04

Niemcy

nieznany

używany

na żądanie

INNO30970

A Wassmer surface grinding machine for the pre-grinding process in brick production is available. Stages: 1, wheel diameter: 700mm, feed speed: approx. 5m/min, drive: belt. An on-site inspection is possible.

linia do produkcji płyt

Hermetik/henke

Niemcy

1993

używany

na żądanie

INNO30579

A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible.