▷ Używana energetyka z Niemiec | innovac.de

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Wszystkie oferty / Energetyka

Awaryjne agregaty prądotwórcze 2 Elektrociepłownie 5 Generatory 2 Grzałki i dmuchawy 6 Inżynieria gazowa 3 Klimatyzacja 1 Kocioł parowy 23 Komponenty i akcesoria 3 Rozdzielnice i komponenty 2 Silniki i turbiny 21 Technologia maszyn chłodniczych 36 Technologia sprężonego powietrza, sprężarki 28 Transformatory 8 Turbiny parowe 1 Wymiennik ciepła 3

Innovac maszyny-uzywane

Energetyka [1 - 20 of 144]

Silnik

Sew/nord FA77/SA67/KA97/SK80LP/SK63P

Niemcy

2025

używany

na żądanie

INNO31829

Various motors, some as-new and unused, SEW-Eurodrive and NORD Drivesystems, are available. As-new: 1) SEW-Eurodrive FA77/G DRN100LS4/TF, year of manufacture: 2021, power: 2.2kW. 2) SEW-Eurodrive SA67/T DRN90L4, year of manufacture: 2025, power: 1.5kW. 3) SEW-Eurodrive FA77/G DRN100LS4/TF, year of manufacture: 2021, power: 2.2kW. 4) SEW-Eurodrive KA97 DRN132S4/TF, year of manufacture: 2025, power: 5.5kW. 5) SEW-Eurodrive KA97 DRN132M4/TF, year of manufacture: 2025, power: 7.5kW. 6) Getriebebau NORD SK80LP/4 TF, year of manufacture: 2023, power: 0.75kW. 7) Getriebebau NORD SK63SP/4 TF, year of manufacture: 2021, power: 0.12kW. 8) SEW-Eurodrive KA97 DRN132S4/TF, year of manufacture: 2025, power: 5.5kW. Used: 9) SEW-Eurodrive FA57/G DRN90L4/TF, year of manufacture: 2024, power: 1.5kW. 10) SEW-Eurodrive FA57/G DRN90S4/TF, year of manufacture: 2024, power: 1.1kW. 11) SEW-Eurodrive FA57/G DRN90S4/TF, power: 1.1kW. 12) Getriebebau NORD 90SP/4 TF, year of manufacture: 2019, power: 1.1kW. 13) SEW-Eurodrive FA57/G DRN90S4, year of manufacture: 2024, power: 1.1kW. An on-site inspection is possible.

Sprężarka śrubowa

Atlas Copco GA22VSD FF

Niemcy

2008

używany

na żądanie

INNO31814

A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment.

Sprężarka śrubowa

Hertz HGS 15F

Niemcy

2022

używany

na żądanie

INNO31786

Power: 15kW, maximum shaft speed: 3000rpm, oil capacity: 6l, tank capacity: 500l, operating pressure: 10bar, capacity: 2.2m³/min, control panel: Logik 9, length: 1915mm, width: 650mm, height: 1640mm, weight: 530kg, operating hours: 2h, with Wortmann drukosep 2 oil-water separator. Inspection on site is possible.

Generator pary wodnej

Clayton SEG-354-1

Niemcy

2010

używany

na żądanie

INNO31777

Operating pressure: 10bar, test pressure (PT): 15bar, steam temperature (TS): 184°C, water content: 916l, steam output: 5480kg/h, heating surface (HS): 73.4m², heat output: 3437kW, maximum burner capacity: 3772kW, minimum burner capacity: 1320kW, gas regulator pressure: 150mbar, burner gas pressure: 5 to 65mbar, nominal gas consumption: 406.9Nm³/h, current consumption: 46.2A, length: 3000mm, width: 1900mm, height: 3300mm. Inspection on site is possible.

Generator pary wodnej

Certuss JUNIOR

Niemcy

1996

używany

na żądanie

INNO31775

Throughput capacity: 600kg/h, permissible operating pressure: 16bar, fuel: oil, length: 1600mm, width: 1000mm, height: 1900mm. Inspection on site is possible. The machine is not under power.

Jednostka sterująca temperaturą

Gwk teco vario wh 120

Niemcy

2016

używany

na żądanie

INNO31697

A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment.

Generator

Weier GEN.DASG450W

Niemcy

1999

używany

na żądanie

INNO31684

A Weier generator is available. Power: 1650kW, Voltage: 690V, Speed: 1575rpm, Design: B3, Current: 1517A, Power factor: 0.91, Insulation class: H, Lubricant quantity: 88cm³, Lubrication interval: 3600h, Weight: approx. 5900kg. The generator originates from an RCC plant, however without control or regulation electronics. The generator was completely overhauled, including rewinding and ceramic bearings. An on-site inspection is possible.

System zimnej wody

Fic Red Compact 34

Niemcy

2017

używany

na żądanie

INNO31633

A compact FIC/Rivacold chiller is available. Usable volume: 410l, cooling capacity: 33.7kW, compressor: S15-52Y, compressor power: 15HP, tank load capacity: 725kg, refrigerant: R404A, cooling tower water consumption: 9.3m³/h, cooling unit water consumption: 3.6m³/h, machine dimensions X/Y/Z: approx. 750mm/1600mm/1900mm. Documentation available. An on-site inspection is possible.

Silnik trójfazowy

Franz Wölfer ODRKF/ODRK/DRK

Niemcy

2021

używany

na żądanie

INNO31630

A total of six Franz Wölfer three-phase asynchronous motors for converter operation are available. 1) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: right, weight: approx. 2190kg. Including second shaft end for emergency drive and magnetic encoder Hübner MAG-PG 200-128-N. 2) Franz Wölfer ODRK 225L-4bT, year of manufacture: 2021, moment of inertia: 0.57kgm², rated power: 190kW, power factor: 0.94, rated speed: 3500rpm, duty type 40%: S3, weight: approx. 510kg. Including encoder POG 10. 3) Franz Wölfer ODRKF 355L-6bbT, year of manufacture: 2021, moment of inertia: 9.82kgm², rated power: 480kW, power factor: 0.92, rated speed: 2080rpm, duty type: S1, direction of rotation: left, weight: approx. 2190kg. Including second shaft end for emergency drive and magnetic encoder Hübner MAG-PG 200-128-N. 4) Franz Wölfer DRK 250M-4T, year of manufacture: 2021, moment of inertia: 0.5kgm², rated power: 45kW, power factor: 0.94, rated speed: 2066rpm, duty type: S1, weight: approx. 410kg. Including encoder HOG 10. 5) Franz Wölfer DRK 250M-4T, year of manufacture: 2021, moment of inertia: 0.5kgm², rated power: 45kW, power factor: 0.94, rated speed: 2066rpm, duty type: S1, weight: approx. 410kg. Including encoder HOG 10. 6) Franz Wölfer DRK 250M-4, year of manufacture: 2021, moment of inertia: 0.5kgm², rated power: 45kW, power factor: 0.94, rated speed: 2066rpm, duty type: S1, weight: approx. 410kg. Including encoder HOG 10. Documentation available. An on-site inspection is possible. Individual sale possible.

Maszyna chłodnicza

L&r WRK-So-25-15-KL-LC

Niemcy

2011

używany

na żądanie

INNO31619

Refrigerant: R407C, refrigerant charge: 28kg, max. operating pressure high pressure side: 25bar, oil fill quantity: 5.5l, cooling medium: water, volume: 6l, max. operating temperature cooling medium: 35°C, sound pressure level: 74dB(A), ambient temperature: -5° to 45°C, connected load: 12kW, max. electrical fuse protection: 21A, operating voltage: 400V, control voltage: 24V/230V, weight: 340kg. An on site inspection is possible.

Kocioł parowy

Loos/weishaupt FT.C 3/GL9-1-D

Niemcy

1989

używany

na żądanie

INNO31614

A complete steam boiler system with a feedwater module and various spare parts is available. 1) Loos steam boiler, year of manufacture: 1974, steam output: 4000kg/h, max. operating pressure: 16bar, max. operating overpressure: 20bar, max. steam temperature: 230°C, heating capacity: 130kW, combustion chamber volume: 63l. 2) Loos FT.C 3 feedwater module/deaerator, year of manufacture: 2009, max. pressure: 0.5bar, test pressure: 2bar, max. temperature: 110°C, volume: 3000l. 3) Weishaupt GL9/1-D dual-fuel burner, year of manufacture: 1989, version: TMD, heating capacity range: 830kW-3500kW, gas type: N, gas category: III, gas setting pressure range: 10mbar-140mbar, oil throughput range: 70kg/h-295kg/h, oil type: EL according to DIN 51603. The system was operated with osmosis water and ran 90% on gas. Documentation available. An on-site inspection is possible.

Generator pary wodnej

Certuss E 16

Niemcy

1997

używany

na żądanie

INNO31613

An electric steam generator is offered. Steam output: 21kg/h, permissible operating overpressure: 6bar, capacity: 8.2l, heating capacity: 16kW. Equipped with analog pressure gauge, function and fault indicator, filling switch. Inspection possible by arrangement.

Kocioł parowy

Loos/weishaupt U-HD 1250/G7-1-D

Niemcy

2003

używany

na żądanie

INNO31581

Two identical Loos steam boiler systems with Weishaupt burners are available. 1) 2x Loos International U-HD 1250 steam boilers, year of manufacture: 2003, max. operating pressure: 10bar, steam output: 1100kg/h, total volume: 1365l. 2) 2x Weishaupt G7/1-D ZD-LN gas burners, year of manufacture: 2003, category: I2ELL, gas type: N, output range: 250kW-1550kW, min./max. connection pressure: 15mbar/500mbar. Both systems including condensate collector and accessories. An on-site inspection is possible. Expected to be available starting 2027.

Generator czystej pary

Apparatebau Wärmetechnik/spirax Sarco SRDE 6/2/12

Niemcy

2003

używany

na żądanie

INNO31580

A pure steam generator from the manufacturer Apparatebau Wärmetechnik GmbH, which was distributed by Spirax Sarco, is for sale with a condensate collector. Heat output: 446kW, max. operating pressure in the tubes/around the tubes: 13bar/6bar, operating temperature min./max.: -10°C/200°C, volume in the tubes/around the tubes: 33l/621l, medium in the tubes/around the tubes: saturated steam/steam. Documentation available. An on-site inspection is possible.

Chłodnica wodna chłodzona powietrzem

M.t.a. Srl TAE 121

Niemcy

1996

używany

na żądanie

INNO31579

Installed power: 18.1kW, voltage: 400V, phases: 3, frequency: 50Hz, max. current consumption: 30.8A, protection rating: IP54, permissible water operating pressure: 6bar, max. water temperature: 65°C, refrigerant: R404A, refrigerant charge: 8.8kg, max. refrigerant pressure: 26bar, ambient temperature: 5-43°C, weight: 416kg, with CE marking. An inspection on site is possible.

Silnik stałoprądowy

Abb DMP 180-4LB

Niemcy

1998

używany

na żądanie

INNO31557

Standard: IEC 34-1, rated power: 114.7kW, rated speed: 1,885rpm, duty type: S1 (continuous duty), insulation class: H-RISE F, armature voltage (Arm.): 460V, armature current (Arm.): 271A, excitation voltage (Exc.): 340V, excitation current (Exc.): 5.43A, protection class: IP23S (drip-proof, open ventilated), cooling: IC06 (forced ventilation by mounted fan), mounting arrangement: IM1001 (B3 foot-mounted design), weight: 455kg, standardized dimensions (IEC frame size 180), shaft height (H): 180mm, foot mounting hole spacing width (A): 279mm, foot mounting hole spacing length (B): 279mm (L version), shaft diameter (D): 48mm (optional 55mm reinforced version), shaft extension length (E): 110mm, mounting hole diameter (K): 15mm, CE marking available. An on-site inspection is possible.

Sprężarka śrubowa

Renner RS 18,5

Niemcy

2016

używany

na żądanie

INNO31555

A compressor is offered. Drive power: 18.5kW, Delivery rate: 2910ltr/min, Max. operating pressure: 8bar. Dimensions X/Y/Z: approx. 1287mm/799mm/1296mm, Weight: approx. 540kg. Inspection possible by appointment.

Kocioł parowy

Loos/weishaupt UL 6000/Monarch RGL 60/2-A

Niemcy

1991

używany

na żądanie

INNO31357

A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fuel burner Weishaupt Monarch RGL 60/2-A, year of construction: 1991, version: ZM, output range: 800kW-6600kW, gas type: N, gas category: I, gas setting pressure range: 30mbar-170mbar, oil throughput range: 120kg/h-556kg/h. Documentation available. An on-site inspection is possible.

Maszyna chłodnicza

Lennox WA 230D K SLN

Niemcy

2008

używany

na żądanie

INNO31308

An air-cooled Lennox chiller is available. Cooling capacity: 312kW, power consumption: 96kW, refrigerant: R407C, refrigerant circuits: 2, filling quantity: 2×38kg, compressors: 4, evaporator: plate heat exchanger, water flow rate: 41.2m³/h, pressure loss: 82kPa, glycol content: 30%, air volume flow: 62000m³/h, operating pressure range: 19bar-32bar, test pressure range: 15bar-29bar. Machine dimensions X/Y/Z: approx. 4750mm/1950mm/2000mm, weight: approx. 3300kg. A coil is leaking, and a fan is missing. Documentation available. An on-site inspection is possible.

Maszyna chłodnicza

Reisner KWR-S 170 KS

Niemcy

2020

używany

na żądanie

INNO31304

A complete Reisner refrigeration system including water tank, dry cooler and condenser is available. Version: split version, refrigerant: R513A, tank volume: approx. 3m³, cooling capacity: 170kW, medium: water, medium temperature inlet/outlet: 14°C/10°C, condenser recooling capacity: 230kW, dry cooler recooling capacity: approx. 170kW. Condenser dimensions X/Y/Z: approx. 4450mm/2250mm/1500mm, dry cooler dimensions X/Y/Z: approx. 7050mm/1600mm/1950mm. Documentation available. An on-site inspection is possible.