Stacja mieszania

Cavicchi 180RC

Niemcy

1991

używany

na żądanie

INNO31037

A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.

więcej

Urządzenie wentylacyjne

Wolf KGXD 160

Niemcy

nieznany

używany

na żądanie

INNO31027

Supply air unit Wolf KGXD 160: air volume: 12,000m³/h, external pressure loss: 300Pa, heating capacity: 102.6kW, cooling capacity: 82.8kW, motor power: 7.5kW, rated current: 14.8/8.5A, speed: 1440rpm. Exhaust air unit Wolf KGXD 160: air volume: 12,000m³/h, external pressure loss: 300Pa, motor power: 5.5kW, rated current: 11.2/6.5A, speed: 1440rpm. System is fully functional, an on-site inspection is possible.

więcej

Urządzenie wentylacyjne

Wolf

Niemcy

2012

używany

na żądanie

INNO31026

Size supply air: Top 21, supply air volume: 1840m³/h, length: 3764mm, width: 712mm, height: 508mm, weight: 333kg. Equipment: pocket filter F7 (short pockets) with differential pressure switch, high air purification efficiency, heater section (long), high-performance heat exchanger for reliable heating, cooling section, prepared for external cooling supply including droplet separator, fan (standard version), energy-efficient and low-noise, empty section with flow distributor, for optimal airflow guidance, silencer type 12, effective noise reduction. Accessories: canvas connection, equipotential bonding, differential pressure switch. System is fully functional, condition very good. An on-site inspection is possible.

więcej

Zbiornik magazynowy

Edelstahl

Niemcy

1996

używany

na żądanie

INNO31019

A stainless steel storage tank with an integrated agitator is available. Calibration: 1996, Volume: 2700l, Pressure: non-pressurized, Material: presumably V2A, Bottom outlet: DN50 milk pipe. An on-site inspection is possible.

więcej

Jednostka ekstrakcyjna

Kiekens Dustmaster 4000

Niemcy

nieznany

używany

na żądanie

INNO30986

A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible.

więcej

Sprężarka

Atlas Copco GA37

Niemcy

2005

używany

na żądanie

INNO30942

A screw compressor Atlas Copco including an air dryer is available. Air volume flow: 5.88m³/min, max. operating pressure: 10bar, motor power: 37kW, speed: 2960rpm, operating hours: approx. 49696h. Including air dryer Atlas Copco FD 95. Documentation available. An on site inspection is possible.

więcej

Agregat hydrauliczny

Lippold BNK250/FCMP 200L

Niemcy

2012

używany

na żądanie

INNO30941

Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.

więcej

Sprężarka

Atlas Copco GA 22 VSD FF

Niemcy

2010

używany

na żądanie

INNO30932

Air flow rate: 4.22m³/min, max. operating pressure: 12.8bar, motor power: 22kW, weight: approx. 560kg, operating hours: over 61000h. Documentation available. An on-site inspection is possible.

więcej

Sprężarka

Atlas Copco GA 37 VSD/GA 50 VSD/GA 30

Niemcy

2007

używany

na żądanie

INNO30923

Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible.

więcej

Sprężarka

Boge C 15 LDR-350

Niemcy

2017

używany

na żądanie

INNO30908

An oil-lubricated screw compressor Boge including an air dryer unit is available. Tank volume: 350l, motor power: 11kW, max. operating pressure: 8bar, air flow rate: 1810l/min, machine dimensions X/Y/Z: approx. 2000mm/750mm/1400mm, weight: approx. 400kg. An on-site inspection is possible.

więcej

System mieszania

Bohle PM 1000

Niemcy

2004

używany

na żądanie

INNO30902

A Bohle container mixer is available. Mixing load: 900kg, Container volume: approx. 800l, Usable filling degree: 85%, Mixer speed: 6rpm, Container diameter: 1100mm, Machine height: 2800mm. An on-site inspection is possible.

więcej

System mieszania

Konus

Niemcy

nieznany

używany

na żądanie

INNO30892

A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.

więcej

Wielofunkcyjna komora dozująca

Rampf MC-EASY

Niemcy

nieznany

używany

na żądanie

INNO30871

Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An on-site inspection is possible, not under power.

więcej

Wielofunkcyjna komora dozująca

Rampf MC-EASY

Niemcy

nieznany

używany

na żądanie

INNO30868

Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control by Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement and dispensing control by Beckhoff, with static 1K and 2K dispensing system. An on-site inspection is possible, not under power.

więcej

Dwuskładnikowa komora dozująca stołowa

Rampf DC-CNC 250

Niemcy

nieznany

używany

na żądanie

INNO30867

Four identical dispensing cells are available, three machines are new and unused, one machine is used. Dispensing capacity: 0.02–0.5cm³/s at mixing ratio 1:1, mixing ratio: up to 1:100, shot volume: 0.005–5cm³, material supply: 20-oz cartridges (600ml), dispensing of small quantities from 5mg per dispensing point, processing of highly abrasive 2K materials. Process: dispensing, mixing, sealing, bonding, potting, protecting, programmable for dispensing dots and beads, suitable for processing abrasive two-component materials, with nozzle control. An on-site inspection is possible.

więcej

Pojemnik ze stali nierdzewnej

Wang Anlagenbau I-TIX

Niemcy

2024

używany

na żądanie

INNO30837

Net capacity: 20,000l, gross capacity: 21,610l, operating temperature: -10 to 100°C, operating overpressure: -0.1 to 0.6bar, material: 1.4571, medium density: 1.3t/m³, height: 4958mm, diameter: 2850mm, empty weight: 2.9t, weight of insulation, platform, access ladder, pipe holder, agitator: 700kg, minimum installation weight: 3.6t. With complete documentation, sale including insulation. An on-site inspection is possible, fully cleaned and ready for operation.

więcej

Zbiornik oleju opałowego

Kammerer 6642/2

Niemcy

2022

używany

na żądanie

INNO30745

An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible.

więcej

Zbiornik procesowy

Concept Gmp/nordhausen Iso

Niemcy

2018

używany

na żądanie

INNO30733

An insulated process vessel is available. Temperature min./max.: -10°C/143°C, volume: 2491L, operating pressure range: -1bar/3bar, test pressure: 5.6bar. An on-site inspection is possible.

więcej

Instalacja do destylacji wody

Concept Gmp AquaInject MD 300 C4 N

Niemcy

2018

używany

na żądanie

INNO30732

Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible.

więcej

Mieszadło

Emod LA180L-12/6

Niemcy

2010

używany

na żądanie

INNO30715

An agitator, presumably from the manufacturer Stelzer, with an Emod motor is available. Agitator shaft: 70mm, operating tank volume: 200m³, operating medium: milk, motor power: 12.5kW, speed: 980rpm, power factor: 0.70. An on-site inspection is possible.

więcej

Wszystkie oferty / Inżynieria procesowa i zakłady chemiczne