Innovac GmbH Used machines from Germany
Innovac used-machines Process equipment and Chemical plants [1 - 20 of 148]
Melting-Machine-Sm-Klebetechnik-GX7511.38 used
Melting Machine
Sm Klebetechnik GX7511.38
Germany
2017
used
on request
INNO29506
A drum melter SM Klebetechnik for melting and conveying hot melt adhesives from 200 liter drums is available. Power: 20kW, max. operating temperature: 180°C, temperature accuracy: +/-1°C, temperature sensor: PT-100, pump capacity: 320kg/h, drum volume: 200l, filling heads: 2, machine dimensions X/Y/Z: approx. 1900mm/850mm/2800mm, weight: approx. 650kg, control: Siemens Simatic S7-1200, operating hours: 87h, pump hours: 15h. Documentation available. On-site inspection is possible.
Water-Spray-Paint-Mist-Extraction-Wall-Rippert-RWS-5000 used
Water-Spray Paint Mist Extraction Wall
Rippert RWS 5000
Germany
1997
used
on request
INNO29498
A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.
Drum-Mixer-Müller-FTM-300-MG1 used
Drum Mixer
Müller FTM 300 MG1
Germany
2014
used
on request
INNO29490
Two identical mixers from Müller GmbH are available. Payload: 200kg, process: Tumbling/mixing, bung drum volume range: 100l-200l, mixing speed: 15rpm, drum diameter: 560mm, max. drum height: 885mm, mixing angle range: 0°-180°, machine dimensions X/Y/Z: approx. 1400mm/2000mm/1800mm. One of the machines was used sporadically, the other hardly ever. Documentation available. On-site inspection is possible.
Reverse-Osmosis-System-Mwt used
Reverse Osmosis System
Mwt
Germany
unknown
used
on request
INNO29472
A MWT reverse osmosis system is available. Capacity: approx. 800l/h. On-site inspection is possible.
High Pressure Vessel
Linde D 200 V21,9
Germany
2019
used
on request
INNO29467
Two Linde high-pressure tanks are available for the storage of hydrogen (GH2/GHe). Diameter: 2000mm, height: approx. 10600mm, wall thickness: 100mm, usable volume: 21.9m³/3600Nm³, max. operating pressure: 200bar, medium weight hydrogen/helium: 305kg/465kg, empty weight: 45000kg. Documentation available. On-site inspection is possible.
High-Speed-Mixer-Henschel-FM1000 used
High-Speed Mixer
Henschel FM1000
Germany
1994
used
on request
INNO29425
A Thyssen Henschel intensive mixer with an AEG motor is available. Volume: 1000l, double jacket volume: 95l, max. operating temperature: 200°C, permissible operating pressure: 5bar, speed: 532rpm, motor type: KA7318M-BB059-Z, power: 184kW. Including tools type FM, floor scraper and fluidizing blades. On-site inspection is possible.
Bead-Mill-Carl-Kurt-Walther used
Bead Mill
Carl Kurt Walther
Germany
unknown
used
on request
INNO29401
An old rectangular ball mill for barrel and dip finishing of mass-produced articles is available. Process: Deslagging/deburring, filling weight range: approx. 30kg-50kg, drive: belt-driven, machine length: approx. 1200mm. On-site inspection is possible.
Dissolver-Grieser-GFVD-750-FU used
Dissolver
Grieser GFVD 750 FU
Germany
2009
used
on request
INNO29360
A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible.
Rotary-Lobe-Pump-Netzsch-Tornado-T.Proc-T2 used
Rotary Lobe Pump
Netzsch Tornado T.Proc T2
Germany
2019
used
on request
INNO29355
A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.
Thermal-Oil-Heater-Htt-wtö-rg-1000-40-1-X-H used
Thermal Oil Heater
Htt wtö-rg 1000-40-1-X-H
Germany
2016
used
on request
INNO29353
Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible.
Suction-Unit-Kemper-CleanAirTower-SF-5000 used
Suction Unit
Kemper CleanAirTower SF 5000
Germany
2019
used
on request
INNO29338
An unused Kemper extraction system for room ventilation in the production area is available. Filter class: H10, Filter method: Storage filter, Filter material: Nano-Cellulose, Separation efficiency: 99.9%, Dust class: M, Volume flow: 5000m³/h, Motor power: 3.35kW, Filter area: 50m². Machine diameter: approx. 1200mm, machine height: approx. 2700mm, weight: approx. 420kg, operating hours: 1h. Documentation available. On-site inspection is possible.
Mixing-System-Händle-MDSG-1015a used
Mixing System
Händle MDSG 1015a
Germany
2011
used
on request
INNO29332
A Händle twin-shaft screen filter mixer with hydraulically adjustable screen, which was overhauled in 2020, is available. Gearbox: ZHP 5.32/1168848, oil type: CLP PAO 320, gearbox weight: approx. 1000kg, mixing trough width: 1000mm, trough and cylinder length: 1150mm+850mm, mixer shaft speed: 12U-30rpm, theoretical wet material throughput capacity: approx. 39t-99t, theoretical compact material volume throughput: 22m³-56m³/h. The gearbox, mixer shafts and screening device were overhauled in 2020. Including mixer screws and screens. Documentation available. On-site inspection is possible.
Plastic-Container-Huber-Plastics-PE100 used
Plastic Container
Huber Plastics PE100
Germany
2018
used
on request
INNO29322
Installation: Indoors, material: PE100, internal dimensions X/Y: 1900mm/2200mm, internal drip tray dimensions X/Y: 2100mm/2000mm, useful volume: 6000l, liquid: HCl/Fe3Cl/H2O, density: 1.15kg/dm³, pressure: unpressurized. On-site inspection is possible.
Storage-Tank-A.-Peter-Edelstahltank used
Storage Tank
A. Peter Edelstahltank
Germany
2004
used
on request
INNO29306
Several stainless steel storage tanks of various sizes are available. 1) 1x stainless steel tank, year of construction: 1997, volume: 30m³. 2) 3x stainless steel tanks A. Peter Behälterbau, year of construction: 1993, volume: 15.3m³, max. temperature: room temperature, operating pressure: static, test pressure: 0.8bar, medium density: 1.2kg/l. 3) 8x stainless steel tanks, year of construction: 2004, volume: 4.8m³. On-site inspection is possible.
Mixing-Station-Sca-1K used
Mixing Station
Sca 1K
Germany
unknown
used
on request
INNO29293
An SCA Schucker (Atlas Copco) adhesive mixing station is available. Dosing system: piston dosing unit, control: SYS 6000, dosing sizes: 10cm³/20cm³/80cm³/160cm³/400cm³/700cm³/2100cm³, max. pressure: 300bar, max. material flow: 88cm³/s, drum volume: 20l/30l/50l/200l. Documentation available. On-site inspection is possible.
Mixing-System-Ekato-Unimix-SRT-50 used
Mixing System
Ekato Unimix SRT 50
Germany
2004
used
on request
INNO29291
An Ekato production mixer for cosmetics and pharmaceuticals is available. Effective volume: 50l, agitator: Paravisc agitator, homogenizer: SterilJet 250, compressed air connection: spout, spout diameter: 8mm, machine dimensions X/Y/Z: approx. 1450mm/1850mm/2000mm, weight: approx. 1400kg, control: Simatic OP 17, documentation available. On-site inspection is possible.
Centrifuge-Thermofischer-Scientific-Multifuge-X3-FR used
Centrifuge
Thermofischer Scientific Multifuge X3 FR
Germany
2018
used
on request
INNO29216
For high-performance applications with temperature-sensitive samples, with pre-cooling function, direct button and CFC-free cooling system. Temperature range: -10 to 40°C, connected load: 1950W, dimensions: 670x745x790mm, net weight: 142.5kg. Including 4x oval 1l bottles, 4x adapters for 15ml tubes, 4x white adapters and bottles, castors, rotor cross TX-1000 and set of 4 metal beakers TX-10000, with instructions for use and appliance test book, no maintenance or repairs, in good condition, little used. On-site inspection is possible.
Compressor-Kaeser-SM11 used
Compressor
Kaeser SM11
Germany
1998
used
on request
INNO29194
A Kaeser compressor, a Kaeser refrigeration dryer and an ABB DC motor are available. 1) Oil-lubricated screw compressor Kaeser SM 11, year of manufacture: 1998, serviced: 2023, operating pressure: 10bar, volume flow: approx. 1100l/min, power: 7.5kW, machine dimensions X/Y/Z: approx. 600mm/650mm/850mm, weight: approx. 200kg. 2) Refrigeration dryer Kaeser TA 5, year of manufacture: 2012, serviced: 2023, refrigerant: R134a, operating pressure: 16bar. The condensate drain is defective. 3) DC motor ABB DMP 180-4LB, year of manufacture: 1998, power: 114.7kW, speed: 1800rpm, operating mode: continuous operation, insulation class: H-Rise F, weight: approx. 450kg. On-site inspection is possible.
Hammer-Mill-Rematec-RPM-650-K20.0 used
Hammer Mill
Rematec RPM 650/K20.0
Germany
2020
used
on request
INNO29158
A Rematec hammer mill as good as new is available. Engine type: AlphaOne OMT-1-280M4, engine power: 108kW, engine speed: 1785rpm. Documentation available. On-site inspection is possible.
Compressor-Atlas-Copco-GA30VSD+FF used
Compressor
Atlas Copco GA30VSD+FF
Germany
2014
used
on request
INNO29155
Two identical Atlas Copco compressors are available. Volume flow: 5.87m³/min, power requirement: 39.66kW, speed: 7300rpm, oil capacity: 20l, operating hours: approx. 50000h. Documentation available. On-site inspection is possible.