Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [781 - 800 of 2610]

Szlifierka do zewnętrz wałków CNC

Willi Göbel GRS-III-2400-SP

Niemcy

2016

używany

na żądanie

INNO28938

Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm.

Wtryskarka dwukomponentowa

Windsor W 4000 G

Niemcy

1992

używany

na żądanie

INNO28937

An injection molding machine with two units Klöckner Ferromatik Desma GmbH, Windsor plant Maintal is available. Stroke volume: 2x30150cm³, clamping force: 40000kN, injection pressure: 1800bar, cooling water requirement: 2x18.1m³/h, total power requirement: 2x700kW. Weight clamping unit: 2x175t, weight injection unit: 2x50t, total system weight: 450t. On-site inspection is possible.

Maszyna do formowania wtryskowego

Ferromatik Magna 775-10000

Niemcy

1996

używany

na żądanie

INNO28936

Three Ferromatik Milacron injection molding machines are available. Output: 1x15kW/2x37kW, power consumption: approx. 136A, machine weight: approx. 38000kg. On-site inspection is possible.

Laminator

Billhöfer KM 1200

Niemcy

1984

używany

na żądanie

INNO28934

Minimum sheet size: 210mm/300mm, maximum sheet size: 1180mm/1600mm, production speed: 45m/min, paper weight range: 80g-600g/m², total machine length: 11000mm, total machine width: 3500mm. An on-site inspection is possible.

Strugarka

Weinig Hydromat 22 BL

Niemcy

1987

używany

na żądanie

INNO28931

A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible.

Linia do wytłaczania folii dmuchanej

Kiefel Worms FSBK 500/50.25D/70.29D/80.25D

Niemcy

2001

używany

na żądanie

INNO28930

A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible.

Linia do filtrowania wina

Pall Corporation Oenoflow 16-A

Niemcy

2004

używany

na żądanie

INNO28926

A Pall Corporation cross-flow microfiltration system for the wine industry is available. Filter modules: 16, filter area: 344m², flow rate: 160l-240l/h, inlet pressure range: 0.5bar-3.5bar, temperature range: -4°C to 25°C, max. cleaning temperature: 65°C. Machine dimensions X/Y/Z: approx. 5100mm/1850mm/2700mm, empty weight: approx. 3150kg. The main pump of the machine is slightly leaking. Documentation available. On-site inspection is possible.

Prasa ręczna

Bruderer BDWP

Niemcy

1993

używany

na żądanie

INNO28925

Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible.

Prasa kanałowa

Tiek/lathen Europress GBP 2-50

Niemcy

1996

używany

na żądanie

INNO28923

A Tiek channel baling press including conveyor belt and tipping device is available. Pressing force: 50t, bale width: 800mm, bale height: 1100mm, bale length: unlimited, motor power: 22kW. Documentation available. On-site inspection is possible.

Rozdrabniacz

Herbold SML 60-100

Niemcy

2003

używany

na żądanie

INNO28922

Cutting width: 1000mm, rotor diameter: 600mm, rotor blades: 6, stator blades: 2, screen diameter: 25mm, power: 75kW, weight: approx. 4600kg. On-site inspection is possible.

Maszyna do strzyżenia

Diemer ASC25-15SH

Niemcy

2005

używany

na żądanie

INNO28921

A shredding machine including a DS 250 vibrating conveyor chute, which can be used in the wood industry as well as in the textile industry, is available. Power: 11kW, operating pressure: 280bar, weight: approx. 1100kg, chute length: 4000mm, chute width: 250mm. Documentation available. On-site inspection is possible.

Prasa do belowania

Autefa Liftbox 700

Niemcy

1990

używany

na żądanie

INNO28920

Two AUTEFA baling presses including automatic bale strapping are available. Press force: 70t, pre-press force: 25t, press dimensions X/Y: 1100mm/600mm, drive: hydraulic, power consumption: 22kW, press capacity: 4 bales/h, bale weight range: 400kg-800kg, material feed diameter: 250mm, machine dimensions X/Y/Z: approx. 4000mm/2000mm/3000mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.

Maszyna do igłowania

Dilo OD 2-25/CBF-25

Niemcy

1986

używany

na żądanie

INNO28919

A Dilo needling machine including a finger feeder modernized in 2020 is available. 1) Needling machine Dilo OD 2-25, year of manufacture: 1986, working width: 2500mm, needle density: 12000 needles/m, needle boards: double board from above, stroke frequency: 1200rpm, needle bar stroke: 60mm. 2) Finger feeder Dilo CBF-25, year of manufacture: 1989, modernized/rebuilt: 2020, documentation available. On-site inspection is possible.

Drukarka tekstylna

Durst/klieverik Rhotex 320/GTC81-3400

Niemcy

2012

używany

na żądanie

INNO28918

A Durst textile printer including Klieverik calender is available. 1) Large format textile printing machine Durst Rhotex 320 for sublimation prints, year of construction: 2012, print type: inkjet, max. print width: 3200mm, max. media thickness: 2mm, resolution: 600dpi, print speed: 65m²/h, colors: CMYK. Machine dimensions X/Y/Z: approx. 6800mm/1700mm/2000mm, weight: approx. 4500kg, printed area: approx. 385000m². Including dye sublimation and workstation. Two print heads must be replaced. 2) Transfer calender Klieverik GTC81-3400, year of construction: 2009, working width: 3200mm, roller diameter: 195mm, max. temperature: 220°C, speed: 2m/min, machine dimensions X/Y/Z: approx. 4400mm/1100mm/1500mm. Including low-voltage winder, year of construction: 2019, documentation available. On-site inspection is possible. Only package sale possible.

Zrywarka

Schumag KZ II B

Niemcy

1987

używany

na żądanie

INNO28916

An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible.

Sprężarka

Atlas Copco ZE5VSD

Niemcy

2022

używany

na żądanie

INNO28906

A mint condition and oil-free Atlas Copco screw compressor system with hardly any operating hours is available. Volume flow at 1.9bar and 193kW: 67m³/h, max. pressure: 2.75bar, output: 200kW, outlet air temperature: 176°C, operating hours: 41h. Including electronics, sound enclosure and starter. Documentation available. On-site inspection is possible.

Maszyna do napełniania worków

Haver & Boecker Roto-Packer

Niemcy

1999

używany

na żądanie

INNO28905

A semi-automatic Haver & Boecker bag filling machine is available. Stations: 6, max. bag weight: 25kg, filling capacity: 1600 bags/h, bag formats: Quicklime/hydrated lime/cement/gypsum, grain size: adjustable, control: Siemens S7. The machine was brought up to date in 2025. Documentation available. On-site inspection is possible.

Pakowarka do tacek

Hobart AW 6431

Niemcy

nieznany

używany

na żądanie

INNO28904

A Hobart tray packaging machine is available. Product weight min/max: 40g/5kg. On-site inspection is possible.

Maszyna do pakowania próżniowego z podwójną komorą

Multivac AG 6

Niemcy

1977

używany

na żądanie

INNO28903

Chamber dimensions X/Y/Z: approx. 460mm/550mm/200mm, welding bars: 4, welding bar length: 440mm, welding seam: double-seam separation sealing, machine dimensions X/Y/Z: approx. 1000mm/950mm/1100mm, weight: approx. 600kg. On-site inspection is possible.

Mikser porcyjny

Servolift MC

Niemcy

2015

używany

na żądanie

INNO28901

Load capacity container + product: 150kg, speed: 20rpm, nominal volume: 120l, max. density: 0.8kg/dm³, feed container volume: 5l-10l, weight: approx. 680kg. Including attachments. Documentation available. On-site inspection is possible.