Używane maszyny z Niemiec - Strona 39 | Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [761 - 780 of 3104]

Obcinak do stosów

Ideal 6550-90

Niemcy

nieznany

używany

na żądanie

INNO31744

Offered is an electric stack cutter. Cutting length: 650mm, Cutting height: 80mm, Residual cut: 25mm, Insertion depth: 610mm, Drive: electromechanical, Control: manual with hand crank. Equipped with spare blade, blade box. Weight: approx. 200kg, Overall dimensions X/Y/Z: approx. 995mm/1260mm/1220mm. Viewing by appointment possible.

Maszyna do zakręcania nakrętek

Adelski PV 6541/1/210/AVM 2103

Niemcy

1999

używany

na żądanie

INNO31743

Automatic Adelski capping machine for automatically closing bottles with screw caps. Number of capping heads: 3, max. capacity: approx. 10000bottles/h, direction of travel: right → left. Including approx. 160000pcs caps. Weight: approx. 1750kg. Documentation and wiring diagrams available. Viewing possible by appointment.

Szlifierka do kół zębatych CNC

Reishauer RZ 301 S

Niemcy

1992

używany

na żądanie

INNO31742

Gear diameter range: 10mm-330mm, gear width: 180mm, max. module: 7, min. module: 0.5mm, clamping length: 420mm, number of teeth range: 10-600, helix angle: +/-45°, speed: 1900rpm, grinding wheel diameter range: 280mm-350mm, grinding wheel width range: 84mm-104mm. Machine dimensions X/Y/Z: approx. 4500mm/6000mm/2300mm, weight: approx. 5100kg, control: Fanuc Series 160i-T. Documentation available. An on-site inspection is possible.

Linia do napełniania i zamykania butelek

Mag Schymanski Betha 28/4

Niemcy

2000

używany

na żądanie

INNO31740

A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible.

Szlifierka do powierzchni CNC

Jung JE600

Niemcy

2016

używany

na żądanie

INNO31739

A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible.

Ploter

Summa SummaSign T1600

Niemcy

nieznany

używany

na żądanie

INNO31735

A repair-required Summa tangential plotter is available. Media width range: 170mm-1620mm, max. cutting width: 1575mm, max. cutting speed: 800mm/s, material thickness range: 0.05mm-0.25mm, repeatability: +/-0.1mm. Machine dimensions X/Y/Z: approx. 2300mm/550mm/1100mm, weight: approx. 75kg. The cutting head of the machine has an unknown defect. An on-site inspection is possible.

Odciąg oparów spawalniczych

Teka CARTMASTER-IFA

Niemcy

2020

używany

na żądanie

INNO31733

A mobile welding fume extraction unit is offered. Max. air volume flow: 3000m³/h, max. pressure: 3000Pa, motor power: 1.5kW, separation efficiency: >=99%, noise level: approx. 70dB(A), filter cleaning: automatically shaken off, filter type: washable filter cartridges, control system: digital control with display. Equipped with filtoo mobile extraction unit, year of manufacture 2022, incl. 3000mm extraction arm, spark protection screen. Inspection possible by appointment.

Centrum tokarskie z wrzecionem przeciwbieżnym sterowane numerycznie (CNC)

Wmz PV2500

Niemcy

2020

używany

na żądanie

INNO31732

A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2450mm/2750mm, travel Z1/Z2: 2700mm/2300mm, max. workpiece diameter: 2800mm, max. swing diameter in the working area: 3000mm, min. workpiece diameter for 4-axis external machining/internal machining: 1250mm/1500mm, min. workpiece diameter for 2-axis internal machining: 450mm, rotary table speed: 230rpm, feed rate X: 32m/min, feed rate Z: 20m/min, B-axis speed: 150rpm, spindle power: 33kW, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg. Machine dimensions X/Y/Z: approx. 9350mm/8600mm/5700mm, control system: Siemens SINUMERIK 840D sl. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Fehlmann PICOMAX 80 CNC 2/3-W

Niemcy

2006

używany

na żądanie

INNO31731

Offered is a Fehlmann CNC universal milling machine. Travel X/Y/Z/W: 700mm/315mm/178mm/495mm, feed rate X/Y: 9m/min, feed rate Z/W: 4m/min, rapid traverse X/Y: 9m/min, rapid traverse Z: 4m/min, table dimensions X/Y: 1130mm/350mm, max. table load: 250kg, spindle taper: SK30, tool positions: 32, max. speed: 9200rpm, spindle power: 5kW, drilling capacity in steel: 30mm, reach: 370mm, distance table-spindle: 620mm, control: Heidenhain. Weight: approx. 3400kg. Inspection possible by appointment.

Centrum tokarskie z wrzecionem przeciwbieżnym sterowane numerycznie (CNC)

Wmz PV4000

Niemcy

2020

używany

na żądanie

INNO31729

A large-format CNC twin-spindle vertical turning machine WMZ is available. Travel X1/X2: 2950mm/2650mm, travel X: 5600mm, travel Z1/Z2: 3200mm/2830mm, feed rate X: 32m/min, feed rate Z: 20m/min, max. workpiece diameter: 3800mm, max. swing in working area: 4000mm, min. workpiece diameter 4-axis internal machining/external machining: 1250mm/1500mm, min. workpiece diameter 2-axis internal machining: 450mm. Table speed: 100rpm, tool stations: 2x47, tool interface: Capto C8, max. tool diameter: 120mm, max. tool length: 400mm, max. tool weight: 20kg, spindle power: 240kW/202kW. Machine dimensions X/Y/Z: approx. 15600mm/10350mm/5750mm, control: Siemens Sinumerik 840D sl. Documentation available. An on-site inspection is possible.

Maszyna do pakowania saszetek

Merz MP2

Niemcy

1980

używany

na żądanie

INNO31727

A vertical form, fill and seal machine for powders, granules, liquids, pastes, creams and solid products requiring repair is offered. Number of lanes: 2, pouch width range: 15-160mm, pouch length range: 15-250mm, max. film roll width: 480mm, max. film roll diameter: 500mm, film core diameter: 70mm, filling range: 0.2-250ml, max. cycle rate: 100cycles/min, max. production capacity: 100pouches/min/lane. Weight: approx. 1000kg. The pull-off unit is defective. Inspection possible by appointment.

Magazyn do podajnika barów

Iemca PRA 52/42/F

Niemcy

2007

używany

na żądanie

INNO31725

An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026.

Prasa do gięcia krawędzi CNC

Amada HFP 80-25SL

Niemcy

2002

używany

na żądanie

INNO31722

A CNC press brake Amada is available. Press force: 800kN, bending length: 2500mm, press beam length: 2570mm, distance between uprights: 2125mm, throat depth: 420mm, max. stroke: 350mm, installation height: 620mm, table width: 60mm, table height: 960mm. Machine dimensions X/Y/Z: approx. 3300mm/1600mm/2750mm, weight: approx. 6100kg, control system: Amada. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Hurco VMX40

Niemcy

2001

używany

na żądanie

INNO31721

A Hurco CNC vertical machining center is available. Spindle power: 15kW, torque: 238Nm, travel X/Y/Z: 1060mm/510mm/610mm, table dimensions X/Y: 1020mm/610mm, tool holder: SK40, tool stations: 24, spindle speed: 10000rpm. Machine dimensions X/Y/Z: approx. 2800mm/3050mm/2800mm, weight: approx. 5900kg, control system: Ultimax. An on-site inspection is possible.

Szlifierka powierzchniowa

Elb SW 624 VA

Niemcy

1971

używany

na żądanie

INNO31720

A horizontal surface grinding machine Elb is available. Grinding process: peripheral grinding, table dimensions X/Y: 915mm/255mm, magnetic chuck dimensions X/Y: 600mm/310mm, grinding dimensions X/Y: 600mm/300mm, max. grinding height: 400mm, feed rate: 30m/min, speed: 2600rpm, machine dimensions X/Y/Z: approx. 2000mm/1600mm/2100mm, weight: approx. 2750kg. An on-site inspection is possible.

Piec do lutowania reflow

Rehm VXC basic 2450 Typ 523/VXC basic 2100 Typ 422

Niemcy

2015

używany

na żądanie

INNO31717

Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026.

Centrum obróbcze CNC

Hurco VMX50T

Niemcy

2008

używany

na żądanie

INNO31716

A repair-required Hurco vertical 3-axis machining center is offered, including spindle through-coolant, 3D tool and a chip conveyor. Travels X/Y/Z: 1270mm/660mm/610mm, rapid traverse: 30m/min, feed rate: 15m/min, operating hours: approx. 47646h, max. spindle speed: 12000rpm, tool positions: 40, tool holder: HSK40, control system: Winmax. Bearing damage in the X-axis. A new spindle was installed in 2018. Inspection possible by appointment.

Centrum obróbcze CNC

Hurco VMX64 / 40T

Niemcy

2002

używany

na żądanie

INNO31715

A CNC machining center by Hurco requiring repair is offered, including spindle through-coolant and a chip conveyor. Travels X/Y/Z: 1625mm/860mm/760mm, operating hours: approx. 39025h, max. spindle speed: 8000rpm, tool stations: 40, tool holder: HSK40, cover of the Z-axis is defective. Inspection possible by appointment.

Instanityzator nawilżający

Niro Atomizer Kopenhagen F10 ABC06

Niemcy

1970

używany

na żądanie

INNO31714

Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible.

Sprężarka

Ingersoll Rand/m. Schneider MH22/Blitz D2N 1500 A/U

Niemcy

2001

używany

na żądanie

INNO31713

Two old compressors are available. 1) Oil-lubricated screw compressor Ingersoll Rand SSR MH 22, year of manufacture: 2001, max. operating pressure: 10bar, power: 25.5kW, weight: approx. 500kg. 2) Oil-lubricated piston compressor Blitz D2N 1500 A/U, year of manufacture: 1979, max. operating pressure: 15bar, air flow rate: 1400l/min, power: 15HP. An on-site inspection is possible.