Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1221 - 1240 of 2654]

Maszyna do formowania wtryskowego

Stork ST 13000-1200

Niemcy

1991

używany

na żądanie

INNO29007

Clamping force: 12,000kN, opening force: opening stroke: closing speed: 1030mm/s, max. mold weight: 22.5t, max. platen dimensions: 1900x1950mm, tie bar diameter: 220mm, ejection force: 130kN, screw diameter: 133mm, injection pressure: 1445bar, width: 3500mm, length: 14,745mm, height: 2740mm. With documentation. On-site inspection is possible.

Pozioma maszyna nawijająca

Mubea Meister

Niemcy

1990

używany

na żądanie

INNO29006

Used for the horizontal winding of profiles, includes control cabinet with main switch of the system, infeed roller conveyor with movable side stop, pneumatically operated lifting device, control panel with emergency stop button, winding unit with height adjustment, outfeed roller conveyor. Connected load: 2.5kW, length: 16,060mm, width: 2485mm, height: 1900mm. With documentation, on-site inspection is possible.

Wielogłowicowy system ważący

Multipond MP-10-2400-1250-J

Niemcy

2019

używany

na żądanie

INNO29005

The multihead weigher was briefly used for mozzarella, includes basic module, power supply, distributor drive, dosing chute, storage container, weighing container, chute set, hopper, operating unit, holder, accessory set, feed hopper, collecting container and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine has been used very little.

W pełni automatyczna maszyna do napełniania i zamykania kubków

Grunwald ROTARY 6000 E

Niemcy

2019

używany

na żądanie

INNO29004

Product: round 2kg bucket for mozzarella with handle and snap-on lid, throughput: 1600-1800 buckets/h, bucket dimensions: 175x131mm, connected load: 7kW, compressed air connection: 6bar, length: 2060mm, width: 2060mm, height: 3200mm, weight: approx. 4t. Double-lane, includes cup setter, cup control, free space for the installation of a multi-head weigher, rag dosing, CIP design, inverted lid station, push-on station, lifting/pushing-off, discharge conveyor, process control, central lubrication, drainage channels and other elements. On-site inspection is possible, the machine is already dismantled and ready for loading, with documentation. The machine did not run much.

Waga taśmowa

Wipotec OCS EC/OCS HC

Niemcy

2014

używany

na żądanie

INNO28999

Two high-precision Wipotec checkweighers are available. 1) Wipotec OCS/EC, year of manufacture: 2014, throughput: 150 products/min, max. belt speed: 0.75m/s, weighing range: 200g-300g. 2) Wipotec OCS/HC-A-200, year of manufacture: 2014, throughput: 200 products/min, max. belt speed: 1m/s, max. weighing weight: 750g. Documentation available. On-site inspection is possible.

Linia do puszek

Ima/cremer/cbv/deckert/uhlmann UN 800S/CF1220/Servo/AVM 738/Sensitive 350

Niemcy

2019

używany

na żądanie

INNO28998

A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible.

Piła tarczowa ukośna

Kaltenbach SKL 450 NA

Niemcy

2007

używany

na żądanie

INNO28996

Saw blade diameter: 450mm, cutting range 90° round/ square/ profiles: 160/ 145/ 320x50mm, cutting range 45° round/ square/ profiles: 160/ 130/ 250x40mm, cutting speed: 1950/ 3900m/min, feed speed: 0-3000mm/min, mitre range: 0° to 90°, swivel range: 180°, weight: approx. 1.5t. On-site inspection is possible.

Maszyna do formowania, napełniania i zamykania worków

Enflex F 1400

Niemcy

1990

używany

na żądanie

INNO28992

An Enflex automatic packaging machine for powdery and granular products for the production of pouches from heat-sealable wrapping materials with three or four-sided sealing is available. Dosing capacity min./max.: 5cm³/50cm³, min. bag width: 50mm, min. bag height: 50mm, max. bag width (single bag): 65mm+65mm, max. bag width (with perforation): 70+mm, max. bag height: 150mm, packaging capacity range: 150-18000 bags/h. Wrapping material (all heat-sealable wrapping materials): Polyethylene opaline, cellophane, polyester, organic polypropylene, etc. Machine dimensions X/Y/Z: approx. 5000mm/1100mm/2100mm, weight: approx. 1100kg. Documentation available. On-site inspection is possible.

Pakowarka przemysłowa

Beck SX HP

Niemcy

2005

używany

na żądanie

INNO28981

Control system: Siemens SIMATIC OP7. The machine needs to be cleaned and serviced, is otherwise in working order and was in operation until the shutdown. An on-site inspection is possible.

Maszyna do formowania i zapakowania

Beck MPX 240T

Niemcy

2005

używany

na żądanie

INNO28980

Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible.

Pakowarka przemysłowa

Beck SXJ HP adapta rt

Niemcy

2019

używany

na żądanie

INNO28979

Product length: 100-600mm, product width: 100-400mm, max. product height: 220mm, max. output: 30 cycles/min. With documentation, 22m long conveyor belt, e-commerce applications and many spare parts. Several pallets with roll film are available. On-site inspection is possible.

Maszyna do spawania wysokiej częstotliwości

Willems 105 CW

Niemcy

2007

używany

na żądanie

INNO28978

A Willems welding machine for plastics is available. Tables: 2, welding area: 500mm/400mm, pressing force: 20kN, frequency: 27.12MHz, generator output: 10kW, overhauled in 2007, documentation available. On-site inspection is possible.

Tokarka

Contur SJ 460x1000

Niemcy

2010

używany

na żądanie

INNO28977

Turning diameter over bed/face slide/crank: 460mm/258mm/785mm, center width: 1016mm, bed width: 300mm, spindle bore: 58mm, speed: 2000rpm, diameter lead screw/quill: 35mm/65mm, quill adjustment: 127mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1200mm, weight: approx. 1650kg. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025.

Szlifierka powierzchniowa

Hahn & Kolb Orion 1255NC-K

Niemcy

1985

używany

na żądanie

INNO28975

A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible.

Frezarka CNC

Chiron FZ 22 L

Niemcy

1988

używany

na żądanie

INNO28974

Travel X/Y/Z: approx. 1600mm/400mm/425mm, table dimensions X/Y: 1500mm/400mm, tool holder: SK40, tool positions: 20, spindle speed: 5000rpm, machine dimensions X/Y/Z: approx. 4000mm/2500mm/2900mm, weight: approx. 7000kg, control: Siemens Sinumerik System 3, operating hours: approx. 19855h. Including approx. 12 tool holders. Documentation available. An on-site inspection is possible.

Obrotowy stół indeksujący

Taktomat TT315-04-270-RH-20

Niemcy

2021

używany

na żądanie

INNO28971

Two almost identical rotary indexing tables are available, 1x TT315-04-270-RH-20-3 KA57 DRN100L4-M2A and 1x TT315-04-270-RH-20-1 KA57 DRN100L4-M5B, diameter output flange: 360mm, overall height (screw-on surface output flange) 243.5, center diameter: 90mm, max. recommended mounting plate size Ø: 2800mm, weight of output flange: 193kg, load on output flange axial force: 32kN, radial force: 17kNm, tilting moment: 5kNm. mounting plate size Ø: 2800mm, rotary table weight: 193kg, load output flange axial force: 32kN, radial force: 17kN, tilting moment: 5kNm, load center column axial force: 28kN, tilting moment: 4kNm, accuracies partial accuracy: ±22mm, axial runout at output flange: ±0.01mm, radial runout at output flange: ±0.01mm. With documentation, on-site inspection is possible.

Maszyna do formowania wtryskowego

Demag ergotech 35-115 EXTRA

Niemcy

nieznany

używany

na żądanie

INNO28970

Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible.

Wiertarka kolumnowa

Wmw BS 50 AI

Niemcy

nieznany

używany

na żądanie

INNO28965

Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible.

Prasa hydrauliczna

Wmw PYE 63 SS

Niemcy

nieznany

używany

na żądanie

INNO28964

Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible.

Wiertarka promieniowa

Wmw BR 40/2 x 1250

Niemcy

nieznany

używany

na żądanie

INNO28963

Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible.