Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1261 - 1280 of 2563]

Urządzenie naświetlające

Automatech/altix ZG 357/386

Niemcy

2004

używany

na żądanie

INNO28323

Two Automa-Tech (Altix) exposure machines are available for the PCB industry. 1) ZG 357, running direction: right-left, min. board dimensions X/Y: 530mm/385mm, max. board dimensions X/Y: 630mm/530mm, film dimensions X/Y: 685.8mm/584.2mm, UV burner power: 2x10kW, exposure: double-sided, cameras: 2/side, machine dimensions X/Y/Z: approx. 3650mm/2600mm/2450mm. 2) Contact platesetter ZG 386, min. plate dimensions X/Y/Z: 525mm/351mm/0.5mm, max. plate dimensions X/Y/Z: 635mm/533mm/4.5mm. The machine has a comprehensive and large spare parts package. Numerous spare parts are also available for the ZG series (not this machine). Documentation available. On-site inspection is possible. Individual sale of the machines or spare parts is possible.

Wózek widłowy

Mitsubishi FD 40

Niemcy

1999

używany

na żądanie

INNO28319

Fuel: diesel, max. speed: 20km/h, max. load: 4000kg, machine dimensions X/Y/Z: approx. 3150mm/1500mm/2300mm, weight: approx. 6200kg, operating hours: approx. 13533h. The handbrake of the must be adjusted. Documentation available. An on-site inspection is possible.

Nawijarka napinająca

Tosa 015

Niemcy

1999

używany

na żądanie

INNO28318

A Tosa winding machine is available. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/2800mm. The machine produces sparks. An on-site inspection is possible.

Maszyna do cięcia strumieniem wody

Eas Duojet

Niemcy

2022

używany

na żądanie

INNO28312

An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.

System czyszczenia strumieniowo-ściernego

Modena CM T10

Niemcy

2013

używany

na żądanie

INNO28311

Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible.

Instalacja do rozdrabniania

Hosokawa Alpine A 1500 P/45-100 CL

Niemcy

2000

używany

na żądanie

INNO28310

A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible.

Prasa różnicowa

Bruderer BDWP-AR14-3200.RK1E3

Niemcy

1992

używany

na żądanie

INNO28309

A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible.

Wózki transportowe

Pefra/bauer 4000/RGP-1

Niemcy

2019

używany

na żądanie

INNO28303

Two heavy-duty transport trolleys are available. 1) Pefra 4000, year of construction: 2019, load capacity: 3000kg, permissible driving speed: 10km/h, permissible total weight: 4010kg, tare weight: 1010kg. 2) Bauer RGP-1, year of manufacture: 2017, load capacity: 2000kg, insertion width: 700mm, insertion pocket length: 870mm, front dimension: 1540mm, tare weight: 378kg. Documentation available. On-site inspection is possible.

Nawijarka napinająca

Tbs-pack Profi-FS-400

Niemcy

nieznany

używany

na żądanie

INNO28301

Turntable diameter: 1600mm, load capacity: 1650kg, max. winding height: 2000mm, turning speed: 12rpm. Documentation available. On-site inspection is possible.

Elektrodrążarka wgłębna CNC

Agie Agietron Integral 3

Niemcy

1997

używany

na żądanie

INNO28292

Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible.

Wiertarka promieniowa

G. Breda R 45 1210

Niemcy

1990

używany

na żądanie

INNO28290

Drilling capacity steel/cast iron: 45mm/55mm, spindle mount: Morse taper MK5, throat depth: 1210mm, quill stroke: 310mm, speed: 1250rpm, feed rate: 1.35mm/rev, spindle table distance min./max.: 525mm/1690mm, table dimensions X/Y: 1900mm/1100mm. Machine dimensions X/Y/Z: approx. 3000mm/1100mm/3000mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

Granulator

Zerma GSL 180-430/GSL 180-300

Niemcy

2003

używany

na żądanie

INNO28285

Two low-speed Zerma beside-the-press grinders are available. 1) Zerma GSL-180/430, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 430mm, rotor speed: 150rpm, drive power: 4kW, number of rotor knives: 45, number of stator knives: 2, min. sieve hole diameter: 5mm, weight: approx. 250kg. 2) Zerma GSL-180/300, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 300mm, rotor speed: 150rpm, drive power: 4kW, number of rotor blades: 30, number of stator blades: 2, min. screen hole diameter: 5mm, weight: approx. 250kg. Documentation available. On-site inspection is possible. Individual sale possible.

Maszyna do pakowania saszetek

Merz MP-2

Niemcy

2008

używany

na żądanie

INNO28284

Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible.

Silnik elektryczny

Abb M3KP 225SMA

Niemcy

nieznany

używany

na żądanie

INNO28282

Three identical ABB electric motors are available. Voltage supply: 380V-690V, motor type: three-phase motor, switching frequency: 2kHz, max. overload time: 10s, cooling time: 10min. PTC sensor included. Documentation available. On-site inspection is possible.

Kolumnowy żuraw obrotowy

Carl Stahl WK 3

Niemcy

2014

używany

na żądanie

INNO28281

Load capacity: 500kg, reach: 2750mm, swivel range: 360°, foundation column weight: approx. 3000kg, tare weight: approx. 3350kg. Documentation available. On-site inspection is possible.

Maszyna do napełniania butelek

Khs Innofill DRS

Niemcy

2013

używany

na żądanie

INNO28279

A KHS bottle filling machine is available. Filling object material: glass, filling points: 168, filling capacity: 22000-65000 bottles/h, sterile filter: 0.2µm, max. oil content: 0.01mg/m³, max. solids content particle diameter: 10µm, min. filling capacity per filling point: 250-300l/h, filler type: pitch circle, pitch circle filler diameter: 5040mm, bottle volume: 0.33l/0.5l, bottle formats: Steini/Long Neck Pils/NRW Pils/Long Neck. Documentation available. On-site inspection is possible.

Etykieciarki górne i dolne

Herma 652C S

Niemcy

2021

używany

na żądanie

INNO28278

Product features: rectangular and dimensionally stable, labeling capacity: 30 products/min, compressed air connection: 6bar, printing process: Thermal transfer printing, product weight range: 15g-1000g, machine weight: approx. 600kg. Label length range top: 15mm-160mm, label width range top: 30mm-300mm. Label length range bottom: 15mm-120mm, label width range bottom: 30mm-300mm. Product dimensions X/Y/Z on top: 30mm-300mm/50mm-250mm/50mm-150mm. Product dimensions X/Y/Z bottom: 140mm-300mm/50mm-250mm/50mm-200mm. Product dimensions X/Y/Z top and bottom: 140mm-300mm/50mm-250mm/50mm-150mm. Including a two meter long and 150mm wide conveyor belt and 180° Dorner conveyor belt. Documentation available. On-site inspection is possible.

System rozpakowywania

Joulin

Niemcy

nieznany

używany

na żądanie

INNO28276

A Joulin vacuum stacking and destacking system for sheet metal and similar products is available. Material length range: 2000mm-6000mm, material width range: 150mm-250mm, material thickness range: 23mm-48mm, max. stacking width: 1200mm. Documentation available. On-site inspection is possible.

Maszyna CNC do erodowania drutu

Mitsubishi FA30

Niemcy

2003

używany

na żądanie

INNO28274

Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg/engel 305/221/ES80

Niemcy

1993

używany

na żądanie

INNO28272

A total of six old injection molding machines with various accessories from Arburg and Engel are available. 1) Engel ES80/35, year of manufacture: 1992, clamping force: 350kN, injection pressure: 1500bar, injection weight: 35g/hp, screw diameter: 22mm, centering bore: 110mm, mold opening stroke: 330mm, control: defective. 2) Arburg 305 ECO 700-230, year of manufacture: 1989, clamping force: 700kN, screw diameter: 40mm, centering bore: 125mm, mold height min./max.: 190mm/420mm, tie bar distance X/Y: 305mm/135mm, mold opening stroke: 250mm, control: defective. 3) Arburg 305-210-700, year of manufacture: 1982, clamping force: 700kN, injection pressure: 1500bar, injection weight: 117g/hp, screw diameter: 35mm, centering bore: 125mm, mould height min./max.: 200mm/400mm, tie bar distance: 305mm. 4) Arburg 221-75-350, year of construction: 1992, clamping force: 350kN, injection pressure: 1500bar, screw diameter: 22mm, centering bore: 110mm, mould height min./max.: 150mm/300mm, tie bar distance: 221mm. 5) Arburg 221-55-250, year of construction: 1991, clamping force: 250kN, injection weight: 32g/hp, screw diameter: 20mm, mold height min./max.: 150mm/300mm, tie bar distance: 320mm. 6) 2K injection molding machine Arburg 221-75-350, year of construction: 1993, clamping force: 350kN, injection pressure: 1500bar, injection weight: 38g/hp, screw diameter: 22mm, mold height min./max.: 150mm/300mm, tie bar distance: 221mm. Including 7-8 Arburg dryers, various injection units, compressor AirComp, mixing unit liquid-silicone with Arburg control and Scheugen plow. Documentation available. An on-site inspection is possible.