Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1241 - 1260 of 2594]

Rozdrabniacz jednowałowy

Gross GAZ 62

Niemcy

2011

używany

na żądanie

INNO28119

A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.

Aluminiowy separator mokry

Beck Alu-Waschboy BE-AL-F1

Niemcy

2023

używany

na żądanie

INNO28116

A mobile wet extraction system Beck for the extraction and filtration of aluminum dusts and other explosive dusts is available. Suction capacity: 1600m³/h, pressure: 2500Pa, suction nozzle diameter: 200mm, motor power: 1.85kW, fan type: BN 30/28 Ex, machine dimensions X/Y/Z: approx. 1050mm/1000mm/2250mm, weight: approx. 210kg. Documentation available. On-site inspection is possible.

Stojak dc

Phoenix Contact Charx Power 30kW

Niemcy

nieznany

używany

na żądanie

INNO28113

A rack for DC power modules with two electrical housing units is available. Power module Phoenix Contact Charx Power 30kW, max. voltage AC/DC: 3x 530V/1000V, rated power: 30kW, efficiency: over 95%, dimensions X/Y/Z: approx. 483mm/134mm/550mm, weight: approx. 31kg. Including two electrical housing units. Documentation available. On-site inspection is possible.

Pompa odśrodkowa

Ksb UD 0603/0243144-013-41

Niemcy

2006

używany

na żądanie

INNO28112

Flow rate: 20m³/h, delivery head: 41.5m, speed: 2925rpm, power at 50Hz: 5.5kW, 400V/690V, 10.3A/6A, power at 60Hz: 6.3kW, 460V, 10.1A, efficiency class: EFF2, weight: approx. 45kg.

Jednostka ekstrakcyjna

Al-ko Profi-JET BG 4

Niemcy

2009

używany

na żądanie

INNO28110

Construction: Clean air chamber/fan/filter chamber/pre-separation chamber/disposal unit, Explosion pressure resistance: 200mbar, Motor power: 30kW, Nominal volume flow: 14000m³/h, Total pressure: 4700Pa. Number of filters: 128, filter length: 2500mm per filter, total filter area: 120m², filter category: BIA category C, machine dimensions X/Y/Z: approx. 4300mm/1600mm/9900mm. Including rotary valve ZRS 960, year of construction: 2009, number of blades: 7, inlet: 250mm/960mm, outlet: 208mm/960mm, motor power: 0.18kW, rotary valve speed: 4rpm, rated current: 0.8A. The frequency converter of the fan is defective. Documentation available. On-site inspection is possible.

Piec hartowniczy

Nabertherm Multitherm N7

Niemcy

1996

używany

na żądanie

INNO28108

Volume: 7l, power: 3kW, max. temperature: 1100°C, internal dimensions X/Y/Z: 230mm/250mm/120mm, external dimensions X/Y/Z: approx. 460mm/690mm/460mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.

Maszyna tkacka

Picanol GTM-A 2RA Gamma 8R

Niemcy

1997

używany

na żądanie

INNO28107

Three identical weaving machines used in the plastics industry are available. Working width: 1900mm, weft insertion: 8 colors. On-site inspection is possible. Individual sale is possible.

Spawarka do naroży

Fröhlich/migatronic SAX700/Automig 273i

Niemcy

2018

używany

na żądanie

INNO28104

Fröhlich SAX 700 corner seam welding machine, welding process: MIG/MAG/WIG, max. weld seam length: 700mm, max. welding angle: 180°, welding speed: 2500mm/min, material thicknesses: 0.8mm-6mm, materials: steel/stainless steel, machine dimensions X/Y/Z: approx. 800mm/1000mm/1800mm. Migatronic Automig 273i welding machine, fuse: 10A, max. power consumption: 9.1kVA, no-load power: 20W, efficiency: 88%, power factor: 0.93, current range: 10A-270A, machine dimensions X/Y/Z: approx. 550mm/250mm/650mm, weight: approx. 30kg. Documentation available. On-site inspection is possible.

Wielkoformatowa drukarka atramentowa

Epson Sure Color T-7000

Niemcy

2012

używany

na żądanie

INNO28103

Two identical large format inkjet printers from Epson are available. Print resolution: 2880dpi/1440dpi, Ink technology: Epson UltraChrome, Printing method: Epson Micro Piezo, Nozzle configuration: 720 nozzles per color. Colors: Magenta/yellow/cyan/matte black/photo black, max. paper sizes: DIN A0/roll size 44 inch, paper thickness: 0.08mm-1.5mm. Machine dimensions X/Y/Z: approx. 1650mm/850mm/1150mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

Linia do napełniania worków, pakowania i paletyzacji

Aventus FIBC

Niemcy

2022

używany

na żądanie

INNO28102

A line for packing and palletizing bags of products such as salt or fertilizer is available. It includes specialized machines for the precise filling, packaging and stacking of bags on pallets for shipping. The system is designed for continuous operation. 1) Palletizing robot for the bags, max. pallet dimensions X/Y: 1300mm/900mm, loading height including pallet: 700mm-1500mm, max. loading weight: 1500kg, max. loading capacity: 500-600 bags/h, recommended loading capacity: 450-550 bags/h. 2) Big bag filling station Aventus FIBC EGF 1, big bag weight: 500kg, 600kg, 1000kg, max. big bag height: 1400mm, max. big bag width: 1000mm, max. big bag depth: 1000mm, loop length: 250mm, filling support diameter: 400mm, filling support height: 500mm, max. bag sag: 250mm, accuracy: +/-1g per 1kg. 3) Stretch-Hood-System Aventus KL Stretch-Hood, max. loading width: 900mm, max. loading length: 1300mm, max. loading height including pallet: 1500mm, max. loading weight: 1500kg, loading material: FFS-PE, film thickness: 100µm-120µm, stretch capacity: 80-120 packages/h. 4) Conveyor system with checkweigher, total conveyor length: approx. 9000mm, belt width: 700mm, checkweigher table width: 1300mm, working height: 600mm-750mm. 5) Label printer/thermal transfer printer Smart Date X, print speed: 350 packages/min, resolution: 300dpi, print area X/Y: 53mm/73mm. Documentation available. On-site inspection is possible.

Kocioł parowy

Bosch U-ND 2000

Niemcy

2015

używany

na żądanie

INNO28101

A Bosch low-pressure steam boiler is available. Total volume: 2480l, max. permissible pressure: 0.5bar, test pressure: 2bar, max. permissible temperature: 110°C, steam output: 1400kg/h, insulation thickness: 100mm. Machine dimensions X/Y/Z: approx. 2850mm/3800mm/3350mm, weight: approx. 3350kg. Documentation available. On-site inspection is possible.

Wiertarka elektroerozyjna

Agie Charmilles Drill 11

Niemcy

2008

używany

na żądanie

INNO28096

An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible.

Frezarka uniwersalna CNC

Deckel FP 5 CC

Niemcy

nieznany

używany

na żądanie

INNO28092

Travel X/Y/Z: 1200mm/600mm/500mm, table dimensions X/Y: 1500mm/675mm, speed: 6300rpm, tool holder: SK40, feed: 5000mm/min, spindle power: 7.5kW, machine dimensions X/Y/Z: approx. 2400mm/2500mm/2500mm, weight: approx. 6000kg. On-site inspection is possible.

Tokarka cykliczna CNC

Romi M 420

Niemcy

nieznany

używany

na żądanie

INNO28091

A Romi CNC cycle lathe is available. Center height: 215mm, center width: 1000mm, turning diameter over bed/face slide: 430mm/204mm, spindle bore: 53mm, rapid traverse X/Z: 7.5m/min / 10m/min, spindle speed: 4000rpm, main spindle motor power: 7.5kW, tool positions: 8, machine dimensions X/Y/Z: approx. 2800mm/1300mm/2000mm, weight: approx. 3000kg, control: GE Fanuc series 21i-TB. Documentation available. On-site inspection is possible.

Warzelnia

Niemcy

2016

używany

na żądanie

INNO28089

A complete brewhouse including fermentation is available. Production capacity: 500l/h, space requirement X/Y: 8000mm/2000mm. 1) Brew mill, volume: 500l. 2) Mash kettle with steam or hot water, material: stainless steel, insulation: V2A. 3) Wort kettle and lauter tun with steam or hot water, material inside/outside: stainless steel/copper, without external boiler. 4) Whirlpool, material: stainless steel. 5) 2-stage plate cooler, insulation: V2A. 6) 6x cylindroconical fermentation tanks (ZKGs), volume: 1200 l, with jacket cooling. 7) Hot water generator. 8) Refrigeration system. Production capacity: 500l per 8 hours. The brewhouse is brand new and unused, but 8 years old. The brewhouse needs to be piped. Documentation available. On-site inspection is possible.

Maszyna do cięcia strumieniem wody CNC

Stako Trium WPC

Niemcy

2016

używany

na żądanie

INNO28087

Cutting range X/Y: 3000mm/6000mm, max. oxyfuel cutting: 300mm, max. cut of unalloyed/alloyed steel: 64mm/50mm, max. cut of waterjet cutting: 100mm. Including Hypertherm HyPrecision high pressure pump. The combination of water and plasma cutting can lead to dimensional deviations. Documentation available. On-site inspection is possible.

Jednostka ekstrakcyjna

Esta Mobex P-36

Niemcy

2014

używany

na żądanie

INNO28084

Air volume flow: 4500m³/h, max. negative pressure: 3400Pa, motor power: 4kW, filter area: 42m², number of filters: 3, machine dimensions X/Y/Z: approx. 2050mm/1050mm/2050mm, weight: approx. 350kg. Documentation available. On-site inspection is possible.

Podwójna piła ukośna

Omga V 2013 NC

Niemcy

2003

używany

na żądanie

INNO28083

An NC mitre saw Omga S.p.A. is available. Speed: 3000 rpm, saw blade diameter: 300 mm, saw blade bore: 30 mm, max. cutting height: 60 mm, max. cutting width: 60 mm, max. feed: 1250 mm, angle adjustment: 45°/30°/22.5°, machine dimensions X/Y: approx. 5600 mm/1250 mm. Documentation available. On-site inspection is possible.

Roboty

Kuka KR210-2 2000

Niemcy

2007

używany

na żądanie

INNO28082

Robot: Applications: Welding/processing/handling/palletizing, mounting: floor, payload: 210kg, axes: 6, max. reach: 2700mm, repeat accuracy: +/-0.06mm, weight: approx. 1250kg. Electric motor: SEW-Eurodrive DV 132ML8/4BM, power: 5.5kW, speed: 1400rpm, weight: approx. 100kg. Documentation available. On-site inspection is possible. The machines are now in dry storage.

Transformator

Abb TNOSCTN-400/21PNSm

Niemcy

2015

używany

na żądanie

INNO28079

Switching group: Dyn5, cooling type: ONAN, short-circuit voltage: 4.2%, short-circuit losses: 3883W, no-load losses: 394W, winding temperature: 65K, oil quantity: 327kg, oil temperature: 60K, oil type: Nytro Taurus, loss class: AoBK, winding material: aluminum, machine dimensions X/Y/Z: approx. 1150mm/850mm/1300mm, total weight: approx. 1650kg. Documentation available. On-site inspection is possible.