Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1201 - 1220 of 2654]

Filtr ramowy

Seitz Orion 60

Niemcy

nieznany

używany

na żądanie

INNO29047

A Seitz filter machine including a Schenk dosing device for beer production is available. 1) Kieselguhr frame filter Seitz Orion 60, max. throughput capacity: 70hl-80hl/h, effective throughput capacity: approx. 45hl/h, max. total filtration capacity: approx. 600hl, pressing device: 2-stage planetary gear, number of plates: 36, number of end plates: 2, plate dimensions X/Y: 600mm/600mm, pipe diameter: 50mm, nominal width: NW50, machine dimensions X/Y/Z: approx. 3800mm/1100mm/1400mm. 2) Dosing device Schenk DO-S120, year of construction: 1971, capacity: approx. 160l/h, high-speed capacity: approx. 320l/h, nominal width: NW50, pipe diameter: 50mm. Documentation available. On-site inspection is possible.

Maszyna do makaronu

Juwel/diosna PQ6-SU/PQ3-SU/TS-120

Niemcy

2021

używany

na żądanie

INNO29046

A Juwel industrial pasta plant for the large-scale production of pasta and similar products is available. Components: Diosna 120 reciprocating kneader, TS-120 drying cell, Pressquick PQ6-SU pasta machine and Pressquick PQ3-SU pasta machine. Drying baskets: 100, bowl capacity: 12kg, daily capacity: approx. 500kg, hourly capacity: approx. 50kg, total plant dimensions X/Y/Z: approx. 2000mm/900mm/2100mm. Documentation available. On-site inspection is possible.

Pompa

Allweiler/ksb NIT50-200U5 AW/Etabloc

Niemcy

2023

używany

na żądanie

INNO29042

Two unused Allweiler and KSB pumps are available. 1) Thermal oil centrifugal pump Allweiler NIT 50-200U5 AW4, year of manufacture: 2023, flow rate: 40m³/h, delivery head: 54m, power: 7.4kW, speed: 2900rpm, pumped medium density: 0.75kg/dm³, viscosity: 1mm²/s, pipe diameter: 203mm. 2) Reconditioned cooling water pump KSB Etabloc, year of construction: 2021, flow rate: 26m³/h, delivery head: 15.5m, viscosity: 1mm²/s, speed: 2915rpm, MEI: 0.7, pipe diameter: 116mm. The KSB pump was overhauled in 2023. Documentation available. On-site inspection is possible.

Współrzędnościowa maszyna pomiarowa CNC

Mitutoyo Euro-C Apex 776

Niemcy

2000

używany

na żądanie

INNO29041

A Mitutoyo CNC coordinate measuring machine calibrated at the end of 2024 is available. Measuring dimensions X/Y/Z: 705mm/705mm/60mm, traversing speed: 250mm/s, measuring speed: 1-3mm/s, acceleration: 980mm/s², resolution: 0.0005mm, table dimensions X/Y: 870mm/1320mm, max. workpiece height: 740mm, max. workpiece weight: 500kg. Machine dimensions X/Y/Z: approx. 1500mm/1550mm/2700mm, weight: approx. 1300kg, control: STATPAK in MCOSMOS-1 v4.2.R3. Documentation available. On-site inspection is possible. Expected to be available from the end of June 2025.

System EDM

Zimmer & Kreim ZK Genius 700/Chameleon Quad

Niemcy

2019

używany

na żądanie

INNO29038

An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documentation available. On-site inspection is possible.

Maszyna do druku fleksograficznego

Officine Padane Zodiac

Niemcy

nieznany

używany

na żądanie

INNO29035

A 4-color Padane single-cylinder counter-printing machine with 4 inking units in pressing operation is available. Printing units: 4, repeat range: 280mm-650mm, max. printing width: 780mm, max. foil width: 810mm, cliché thickness: 2.84mm, printing process: single-sided, max. roll diameter: 600mm, number of cliché cylinders at 270mm: 2, number of cliché cylinders 280mm-650mm: 4, machine dimensions X/Y/Z: approx. 7500mm/2600mm/3000mm. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

Pionowe centrum obróbcze

Buffalo Machinery Micromill Challenger MM-430

Niemcy

2011

używany

na żądanie

INNO29033

X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible.

Cela spawalnicza robota

Igm RTE 497-S

Niemcy

2021

używany

na żądanie

INNO29032

Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible.

Hydrauliczna prasa krawędziowa

Gwf H 100-2

Niemcy

1992

używany

na żądanie

INNO26811

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

Pojemnik chłodniczy do zamrażania szokowego

Thermobil/ Dawson MEGABLAST

Niemcy

2016

używany

na żądanie

INNO29031

The system consists of two Bitzer compressors, a dual-circuit evaporator and a dual-circuit condenser, there are two completely separate systems. Compressor type: Semi-thermetic reciprocating compressor, model: 6F-50.2Y: Noise level of the compressor: 55-64dB(A) at 10 m (under free field conditions). Depending on operating conditions, refrigerant: R404A, charge weight: 32kg per system, standard oil type: ICI Emkerate RL32H: standard electrical power supply: 160A TPN+E, condenser: integrated dual-circuit condenser with three 3-phase EC fans, condenser airflow: 11.1m³/s, compressor sound pressure level: 63dB(A) at 10m (under free field conditions), evaporator: integrated dual circuit evaporator with 4 axial high pressure fans, evaporator airflow: 14m³/s at 200Pa resistance, defrosting method: electric, drain pan defrosting method: electric. On-site inspection is possible.

Wielofunkcyjny czajnik

Mkn 200L

Niemcy

2015

używany

na żądanie

INNO29028

Capacity: 200l, pouring height: 600mm, boiler diameter: 694mm, boiling time: 33min, connected load: 37kW, fuse protection: 3x 63A, protection class: IPX5, length: 1300mm, width: 850mm, height: 920mm, weight: 235kg. Electrically tiltable, heating type: electric, cover: double-walled. On-site inspection is possible.

Dwukomorowa maszyna próżniowa

Webomatic PNC 20AD

Niemcy

1993

używany

na żądanie

INNO29027

Internal chamber dimensions: 850x720x200mm, cycle output: 2-3 cycles/minute, depending on product size and vacuum, length of sealing bar: 830mm, connected load: 5.5kW, control: WEBOMATIC System 4000, length: 1865mm, width: 870mm, height: 1200mm. The machine was recently inspected and serviced. On-site inspection is possible.

Elektryczna patelnia uchylna

Mkn Optima 850 Elektro

Niemcy

nieznany

używany

na żądanie

INNO29026

Max. Capacity: 99 litres, internal pan dimensions: 1020x540x210mm, connected load: 14.4kW, 3 NPE AC 400V, fuse protection: 3x 32A, sensible heat output: 6480W, latent: 5760W, length: 1600mm, width: 850mm, height: 700mm, weight: 245kg. With appliance switch, limit switch, temperature controller, safety temperature limiter, control lamps, SUPRA contact heating element, contactor, fixed electrical connection and IPX5. On-site inspection is possible.

Maszyna Flakkotier

Profin BLUELINE HFM 1/2-R

Niemcy

2010

używany

na żądanie

INNO23597

Suitable for edge preparation of all types of cutting tools with the corresponding holders and turning devices, e.g. roll cutters turning devices, e.g. cylindrical milling cutters, saw blades up to 380mm diameter, shank tools, indexable inserts and saw band coils up to 750mm diameter. Number of units: 1, table pitch circle: 600mm, table outer diameter: 800mm, machining width/height: 180/ 250mm, feed rate: 0.5-6m/min, flakkotier power: 4kW, connected load: 6.4kW, length: 2500mm, width: 1950mm, height: 2500mm, weight: 3t, operational hours counter: approx. 100h. Including documentation, without accessories or spare parts. On-site inspection is possible.

Magazyn do podajnika barów

Kurt Breuning Irco SIMAG 80.1 U/3000-II

Niemcy

2022

używany

na żądanie

INNO29023

Guide channel sets for diameters: 22, 42, 47, 52, 62, 67, connected load: 2.4 kVA, weight: 1.8 tonnes. Featuring short changeover times, easy handling, maximum running smoothness, hydrodynamic bearings, 360° closed guide channels, reliable feeding of rotationally symmetrical profile material. The machine has only been used a little, an on-site inspection is possible.

Maszyna do czyszczenia butelek

Gm Arcade ARCADE GEK 2.1 RV1

Niemcy

2024

używany

na żądanie

INNO29022

Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible.

Automatyczna maszyna do kontroli optycznej

Vi Technology 5K SPECTRO

Niemcy

nieznany

używany

na żądanie

INNO29017

Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible.

Laserowa wycinarka do tkanin

Sei Laser Mercury 2030 Conveyor 3

Niemcy

2023

używany

na żądanie

INNO29012

Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without computer, to be provided by the customer, Extraction unit: 2x extraction fans 5.5kW each, Scanner: Manual barcode scanner, Unwinding device: for material rolls with unwinding bar, Unwinding system: Connection available. The system was only installed and approved, series operation did not take place. On-site inspection is possible, documentation available.

Sprężarka śrubowa

Blitz Monsun ECO 22 D FU

Niemcy

2013

używany

na żądanie

INNO29010

Speed: 3000/min, volume flow: 3.7m³/min, overpressure: 8bar, operating pressure: 4-13.5bar, oil capacity: 10l, connected load: 22kVA, length: 1500mm, width: 850mm, height: 1200mm, weight: 672kg. Including test certificates for the pressure vessels, speed-controlled with heat exchanger for heat recovery.

Centrum toczenia i frezowania CNC

Niles-simmons N30/2500 MC

Niemcy

2002

używany

na żądanie

INNO29009

With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible.