Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1181 - 1200 of 2654]

Maszyna do układania

I-pulse (yamaha) M20

Niemcy

2012

używany

na żądanie

INNO29080

An i-Pulse SMD placement machine with IQ Vision, a subsidiary of Yamaha, is available. PCB thickness range: 0.4mm-4.8mm, min. PCB dimensions X/Y: 50mm/30mm, max. PCB dimensions X/Y: 1480mm/510mm, transport speed: 900mm/s, number of heads: 4, production output: 24000CPH. Placement accuracy CHIP: +/-0.04mm, placement accuracy IC: +/-0.025mm, placement angle: +/-180°, max. component size range: 0402-120mm/90mm, max. component height: 30mm. Machine dimensions X/Y/Z: approx. 1750mm/1750mm/1450mm, weight: approx. 1500kg. Including 3x feeder carriages and 2x tray feeders for installation in the machine. Documentation available. On-site inspection is possible.

Magazyn wysokiego składowania

Stopa

Niemcy

2005

używany

na żądanie

INNO29079

A Stopa heavy-duty high-bay racking system for panel storage is available. Total loading capacity: 51t, storage units: 17, max. storage unit load: 3t, max. panel dimensions X/Y: 1525mm/4050mm. Documentation available. On-site inspection is possible.

Silnik serwo

Siemens Simotics M-1 PH8

Niemcy

nieznany

używany

na żądanie

INNO29077

Axle height: 80mm, power: 5.4kW, torque: 22.4Nm, speed: 2300rpm, moment of inertia: 98.3kg/cm², weight: approx. 50kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

Silnik serwo

Siemens Simotics M-1 PH8

Niemcy

nieznany

używany

na żądanie

INNO29072

An unused Siemens servo motor is available. Axle height: 160mm, power: 31kW, torque: 257Nm, speed: 1150rpm, moment of inertia: 2586kg/cm², weight: approx. 300kg. Including integrated holding brake. Documentation available. On-site inspection is possible.

Wykrawarka laserowa CNC

Trumpf Trumatic 600L

Niemcy

1995

używany

na żądanie

INNO29071

A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible.

Prasa do gięcia krawędzi

Hämmerle AP 200x2600

Niemcy

1990

używany

na żądanie

INNO29070

Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible.

Tokarka CNC

Pinacho Smart Turn 6/180-100

Niemcy

2006

używany

na żądanie

INNO29067

A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible

Śrutownica

Gutmann 1250

Niemcy

1995

używany

na żądanie

INNO29066

A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible.

Piec hartowniczy

Stahlmann Schienen-Härteofen

Niemcy

2018

używany

na żądanie

INNO29065

A rail hardening furnace for the production of shears is available. Working length: 3400mm, heating zones: 2, heating power: 34kW, useful space separation: SiC plates, temperature-controlled zones: 2, conveying direction: free, machine dimensions X/Y/Z: approx. 4000mm/1250mm/2100mm. Including automatic conveyor system and separate blower. Documentation available. On-site inspection is possible.

Piła tarczowa

Holz-her Super Cut 1215

Niemcy

nieznany

używany

na żądanie

INNO29063

A vertical panel saw Holz-Her is available. Cutting length: 2200mm, cutting height: 30mm, number of saw blades: 3, saw blade diameter: 300mm, panel thickness: 0mm-30mm/30mm-70mm, clamping surface X/Y: 2200mm/5300mm, vertical stroke: 2200mm, horizontal stroke: 5300mm, speed: 4420rpm, machine dimensions X/Y: 6400mm/2900mm, weight: approx. 1000kg. Including 2x 3-part folding rails and 2x adjustable longitudinal stops with scales. Documentation available. On-site inspection is possible.

Gratownica

Reis RV30-26-RSVI

Niemcy

2014

używany

na żądanie

INNO29061

A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible.

Sprężarka

Atlas Copco GA 15 FF

Niemcy

2000

używany

na żądanie

INNO29059

Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible.

Podwójna piła ukosowa

Emmegi Norma 2-400 TU/4

Niemcy

2020

używany

na żądanie

INNO29058

Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible.

Piła do listew przyszybowych

Haffner GL 172

Niemcy

1995

używany

na żądanie

INNO29057

Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible.

System mieszania

T-s-i mastermix gear basic

Niemcy

2014

używany

na żądanie

INNO29056

A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

System spawania dźwigarów kratowych

Ideal GA 400/1600

Niemcy

1988

używany

na żądanie

INNO29055

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range: 250mm-1600mm, mesh length range: 600mm-2900mm, min. cross wire pitch: 15mm, min. longitudinal wire pitch: 25mm, increments of longitudinal wire pitch: 5mm, wire diameter range: 3mm-8mm, number of longitudinal wires: 20, number of welding presses: 12, rated power at 50%: 6x130kVA. On-site inspection is possible.

System spawania dźwigarów kratowych

Evg LGR/85-PV

Niemcy

2001

używany

na żądanie

INNO29054

A steel mesh welding system for the automatic production of welded steel wire mesh is available. Mesh width range with a bar diameter of 3mm to 6mm: 500mm-2150mm, mesh width range with a bar diameter of 2mm to 3mm: 500mm-2000mm. Grid length range with a rod diameter of 3mm to 6mm: 600mm-3000mm, grid length range with a rod diameter of 2mm to 3mm: 600mm-2000mm. Min. cross wire pitch: 12.5mm, min. longitudinal wire pitch: 25mm, wire diameter range: 2mm-6mm, max. number of longitudinal wires: 52, production capacity: 52 strokes/min, rated power at 50%: 840kVA, max. stack height: 600mm. Total system dimensions X/Y/Z: approx. 20000mm/7600mm/3400mm. Including longitudinal wire distributor in 40mm and 50mm pitch and longitudinal wire console in 40mm, 50mm and 75mm pitch. Documentation available. On-site inspection is possible.

System spawania dźwigarów kratowych

Filzmoser GH400V-ST

Niemcy

2009

używany

na żądanie

INNO29053

A fully automatic lattice girder welding system for the production of reinforcing steel (rebar) is available. Outlet height: 1400mm, beam length min./max.: 800mm/16000mm, base width: 58mm, beam width range: 70mm-116mm, max. production capacity: 15m/min. Beam type KT: upper beam diameter range: 5mm-16mm, lower beam diameter range: 5mm-16mm, diagonal beam diameter range: 4.5mm-9mm, beam height range: 70mm-400mm, diagonal pitch: 190mm-210mm. Beam type KTS: top chord diameter range: 5mm-7mm, bottom chord diameter range: 5mm-7mm, diagonal beam diameter range: 5mm-7mm, beam height range: 80mm-310mm, diagonal spacing: 200mm. Documentation available. On-site inspection is possible.

Spawarka doczołowa

Strecker SS 120 FPC

Niemcy

2011

używany

na żądanie

INNO29052

Eine Strecker Widerstandsstumpfschweißmaschine mit integrierter hydraulischer Presseinheit ist verfügbar. Nennleistung bei 50%: 120kVA, Nennstrom: 300A, Betriebsdruck: 350bar, max. Spannkraft: 69kN, max: 44kN, Hydraulikaggregat: K-VDS-700, Schneidleistung: 32mm, Kolbenpresskraft: 44t, schwenkbar: möglich. Maschinenabmessungen X/Y/Z: ca. 1800mm/1100mm/1600mm, Gewicht: ca. 2300kg, Steuerung: VIPA S7. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

Przenośnik taśmowy

Rothstein RO80 3000x300

Niemcy

nieznany

używany

na żądanie

INNO29049

Two Rothstein and Plast Service conveyors are available. 1) Inclined conveyor Rothstein RO80 3000x300, year of construction: probably 2005, length: 3000mm, width: 300mm, max. load: 7kg/m, rated power: 0.18kW. 2) Ascending conveyor Plast Service. On-site inspection is possible.