Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1301 - 1320 of 2702]

Przenośnik taśmowy

Niemcy

nieznany

używany

na żądanie

INNO29146

A waterproof trough conveyor belt, therefore well suited for wet goods such as a food washing system (vegetables/fruit), is available. Material: stainless steel, belt width: 370mm, trough width: 400mm, trough height: 150mm, total length: 12300mm, total width range: 500mm-600mm. Without motor. Documentation available. On-site inspection is possible.

Przenośnik taśmowy

Stöber K21R 90 S4 TLB 960

Niemcy

nieznany

używany

na żądanie

INNO29145

An Intralox belt, buffer table and Stöber conveyor belt are available. Belt width: approx. 1150mm, belt length: approx. 4900mm, frame material: stainless steel. Including 4 belts. Documentation available.

Rama napinająca

Brückner

Niemcy

1986

używany

na żądanie

INNO29144

A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible.

Maszyna do formowania wtryskowego

Boy 22 SVV dipronic

Niemcy

1987

używany

na żądanie

INNO29143

A small Boy injection molding machine is available. Clamping force: 220kN, tie bar dimensions X/Y: 254mm/254mm, max. platen distance: 400mm, min. installation height: 200mm, opening stroke: 200mm, ejector stroke: 80mm. Screw diameter: 24mm, injection volume: 36cm³, injection weight: 32g, injection pressure: 1455bar. Machine dimensions X/Y/Z: 1800mm/1000mm/2600mm, weight: approx. 750kg, control: Dipronic. On-site inspection is possible.

Maszyna licząca

Mtf/lauper MR-S1/LQ 100

Niemcy

2017

używany

na żądanie

INNO29142

A total of three counting and distribution machines are available for filling containers (pouches) to the exact number of pieces. 1) MTF Technik MR-S1, year of manufacture: 2017. 2-3) Two identical Lauper LQ 100, year of manufacture: 2007, control: IT 9000. Documentation available. On-site inspection is possible.

Przenośnik taśmowy

Dmg Mori B-F7003

Niemcy

nieznany

używany

na żądanie

INNO29141

A chip conveyor for DMG Mori machines is available. Height: 1650mm, width: 1870mm, length: 3560mm, weight: approx. 600kg. Without pump and skimmer. Approximately half of the rails for further transportation are defective. Documentation available. On-site inspection is possible.

Wykrawarka CNC

Amada EMK 3610 NT/MP300 M

Niemcy

2007

używany

na żądanie

INNO29137

An Amada CNC turret punching machine for medium format sheets including an MP300 M loading unit, Wilson X-Sharp grinding machine and numerous standard and special punching tools are available. 1) CNC turret punching machine Amada, year of manufacture: 2007, punching force: 300kN, max. sheet dimensions X/Y: 3000mm/1500mm, max. sheet thickness: 6.35mm, stroke rate: 600 strokes/min, simultaneous positioning speed: 128m/min, repeat accuracy: +/-0.1mm, machine dimensions X/Y/Z: approx. 5100mm/3200mm/2300mm, weight: approx. 18000kg. 2) Automatic sheet loading and unloading system Amada MP 300 M, max. sheet dimensions X/Y: 3000mm/1500mm, min. sheet dimensions X/Y: 1000mm/300mm, sheet thickness range: 0.8mm-6mm, max. load capacity per pallet: 3000kg, max. stacking height: 400mm, max. sheet weight: 170kg, max. pallets: 9, pallet change time: 25s, sheet loading time: 18s, weight: approx. 4900kg. 3) Wilson X-Sharp tool grinding machine. Documentation available. On-site inspection is possible.

Szpulownica

Sahm 400E

Niemcy

1999

używany

na żądanie

INNO29135

A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible.

Przesiewacz wiroprądowy

Azo DA 350

Niemcy

2004

używany

na żądanie

INNO29134

An AZO cyclone filter machine including drive is available. Screen baskets: 2, screen basket mesh size: 2mm/4mm. Documentation available. On-site inspection is possible.

Prasa do gięcia krawędzi CNC

Hämmerle BM 200-3100

Niemcy

1998

używany

na żądanie

INNO29133

Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible.

Pojemnik ze stali nierdzewnej

Niemcy

nieznany

używany

na żądanie

INNO29128

A total of 15 (15x) stackable IBC containers for bulk goods are available. The containers were used in the food industry for the storage of spices, but have no foreign odor. Volume: approx. 750l, steel type: stainless steel 1.4301, mandrel lid diameter: 400mm, drain disk valve: DN 250, container dimensions X/Y/Z: approx. 1200mm/1000mm/1450mm. On-site inspection is possible.

Disolwer kadziowy

Vollrath VDDX 50

Niemcy

1972

używany

na żądanie

INNO29126

A Vollrath multi-shaft mixing plant is available. Container volume: 700l, max. batch capacity: approx. 700kg, agitator disks: 3, agitator disk diameter: 275mm, speed: 2000rpm, motor power: 36kW, stroke: 950mm, machine dimensions X/Y/Z: approx. 2200mm/1250mm/2400mm, weight: approx. 2600kg. Documentation available. On-site inspection is possible.

System inspekcji SMD

Saki Spider/BF-Frontier II

Niemcy

2008

używany

na żądanie

INNO29124

Two inspection machines for the semiconductor industry, specifically for PCB production, are available. 1) 3D solder paste inspection system Saki SPI-Spider, year of manufacture: 2007, inspection type: tomography, 2) automatic optical inspection system Saki AOI System BF-Frontier II, year of manufacture: 2008, resolution: 18µm, min. board dimensions X/Y: 60mm/50mm, max. board dimensions X/Y: 500mm/460mm, board warp: +/- 50mm. PCB dimensions X/Y: 500mm/460mm, PCB warp: +/-2mm, component clearance top/bottom: 40mm/40mm, rotation: 359°, transport height: 900mm, transport height adjustment: +/-20mm, machine dimensions X/Y/Z: approx. 850mm/1350mm/1250mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

Rotator PCB

Nutek NTM 0410 TXL-1000-1 (P)

Niemcy

2018

używany

na żądanie

INNO29123

A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Destacker

Nutek NTM 220 DSXL-FW

Niemcy

2007

używany

na żądanie

INNO29122

A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Urządzenie do chłodzenia wody

Hyfra VWK 50/1-S

Niemcy

2005

używany

na żądanie

INNO29119

A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Cms Avant

Niemcy

1999

używany

na żądanie

INNO29117

A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.

Jednostka sterująca temperaturą

Gwk weco 09 A

Niemcy

2009

używany

na żądanie

INNO29116

Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes.

Wózek widłowy

Gangcha CQDB16

Niemcy

2023

używany

na żądanie

INNO29115

Load capacity: 1600kg, load center: 500mm, drive: electric, mast: Triplex, lifting height: 3600mm, fork length: 1200mm, fork carriage width: 902mm, turning radius: 1800mm, machine dimensions X/Y: approx. 2450mm/1050mm, operating hours: 62h. Documentation available. On-site inspection is possible.

Pompa próżniowa

Rietschle Twister VSB 120

Niemcy

2006

używany

na żądanie

INNO29114

Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.