Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1341 - 1360 of 2861]

Ręczny wózek widłowy

Combilift COMBI-WR4

Niemcy

2023

używany

na żądanie

INNO29800

Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible.

Frezarka do gwintów

Mikron 132.02

Niemcy

nieznany

używany

na żądanie

INNO29795

Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.

Wykrawarka portalowa ruchoma

Leiner KKD-50

Niemcy

2003

używany

na żądanie

INNO29794

Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Wykrawarka portalowa ruchoma

Leiner KKD-30

Niemcy

2000

używany

na żądanie

INNO29793

Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Wykrawarka portalowa ruchoma

Leiner KKD-50

Niemcy

2004

używany

na żądanie

INNO29792

Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

Maszyna do erodowania drutu

Agie AGIECUT 220

Niemcy

1995

używany

na żądanie

INNO29790

X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible.

Przenośnik taśmowy

Dorner FlexMove

Niemcy

2021

używany

na żądanie

INNO29788

Conveyor belt width: 105mm, drive motor power: 0.37kW, installation dimensions: 1600x1380.5mm, height: 725mm. Includes operation and maintenance manual, conveyor belt, guide frame, feet, drive motors, power supply and additional elements. With extensive documentation, the machine is completely dismantled. An on-site inspection is possible. The conveyor belt can be assembled in various ways.

Maszyna do układania

Essemtec FLX2011-LV

Niemcy

nieznany

używany

na żądanie

INNO29787

An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible.

System opróżniania pojemników

Netzsch BEF 200

Niemcy

2003

używany

na żądanie

INNO29786

A stationary and a mobile container emptying system (drum emptying) Netzsch are available. Drum size: 100l/200l, drive power: 15kW, max. delivery pressure: 8bar, delivery rate: approx. 1000l/h, speed: 1450rpm, max. liquid viscosity: 1000Pas. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm. Documentation available. An on-site inspection is possible.

Zgrzewarka do folii

Joke HTMST 1000LA

Niemcy

nieznany

używany

na żądanie

INNO29785

A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible.

Stabilizator

Keyence SJ-H

Niemcy

nieznany

używany

na żądanie

INNO29783

A total of 10 deionization devices Keyence are available. Ion generation: +/-7000V, ion balance: +/-30V, max. effective range: approx. 3000mm, working distance range: 50mm-2000mm, electrode material: tungsten, applications: plastics/films/coating/electronics/packaging. Documentation available. An on-site inspection is possible.

Maszyna barwiąca

Then/ Fongs AFS 50/ AFT 225/

Niemcy

nieznany

używany

na żądanie

INNO29782

A package of eleven Dyeing Machines is available, 1) 5x Dyeing Machine Airflow AFT 225, 2) 1x Dyeing Machine Then AFS 50, 3) 1x Dyeing Machine Then AFE 50, 4) 1x Dyeing Machine Fongs HST 130/32, 5) 1x Dyeing Machine Then DN 200, 6) 2x Dyeing Machine Then OFHT 170. An on-site inspection is possible.

Elektryczny wózek paletowy

Jungheinrich/still/hawker Ex

Niemcy

nieznany

używany

na żądanie

INNO29781

A total of explosion-proof 6 low-lift and high-lift trucks as well as 6 manual pallet trucks from the manufacturers Jungheinrich, Still, and Hawker are available.

Nawijarka napinająca

Leng Stretch Ab LS-200LT

Niemcy

nieznany

używany

na żądanie

INNO29780

Turntable diameter: 1650mm, turntable height: 65mm, mast height: 2560mm, max. load capacity: 2000kg, max. pallet dimensions X/Y/Z: approx. 1200mm/1100mm/2400mm. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/2600mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible.

Maszyna do spieniania produktów

Menzel/ Bauch CT 5206-Ah/ CB-WU 380

Niemcy

nieznany

używany

na żądanie

INNO29779

Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible.

Pompa dozująca

Viscotec

Niemcy

nieznany

używany

na żądanie

INNO29778

A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible.

Linia do produkcji elementów kamiennych

Omag Tronic S22 140-90

Niemcy

2001

używany

na żądanie

INNO29777

A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible.

Pozostałe zapasy

Atlas Copco GA 15/FD 40

Niemcy

1992

używany

na żądanie

INNO29776

Two peripheral devices for an injection moulding facility are available. 1) Compressor Atlas Copco GA 15, year of manufacture: 1992, air flow rate: 28.2l/s, motor power: 15kW. 2) Dryer Atlas Copco FD 40, operating pressure: 20bar. Documentation available. An on-site inspection is possible. The machines are ready for loading. Sale of individual units is possible.

Linia do wytłaczania folii dmuchanej

Kuhne K45-30D

Niemcy

nieznany

używany

na żądanie

INNO29774

A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible.

Linia ekstruzyjna

Reifenhäuser/dolci

Niemcy

1970

używany

na żądanie

INNO29772

A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible.