Innovac GmbH Used machines from Germany
Innovac maszyny-uzywane Najnowsze oferty  [1001 - 1020 of 2531]
Transformator-Elin-TDQ-632A01S5H-19 używany
Transformator
Elin TDQ-632A01S5H-19
Niemcy
2001
używany
na żądanie
INNO28174
Rated power: 630kVA, type: Lithium, power St1/St2/St3: 10400V/10000V/9600V, cooling type: ONAN, rated current: 36.35A, short circuit: 4.24%, max. short circuit duration: 2s, insulating fluid: Technol 2002, max. oil temperature: 95°C, max. oil weight: 335kg, machine weight: 1865kg. Documentation available. On-site inspection is possible.
Transformator-Bub-S5841B używany
Transformator
Bub S5841B
Niemcy
1984
używany
na żądanie
INNO28173
Rated power: 630kVA, Type: Lithium, Operating mode: Continuous operation, Power St1/St2/St3: 10400V/10000V/9600V, Cooling type: ONAN, Rated current: 36.4A, Short circuit: 4.2%, Max. short circuit duration: 2s, Machine weight: 1680kg, Oil weight: 340kg. Documentation available. On-site inspection is possible.
Wiertarka-promieniowa-Mas-VO-32 używany
Wiertarka promieniowa
Mas VO 32
Niemcy
1992
używany
na żądanie
INNO28172
Arm length: 1000mm, max. drilling diameter steel/cast iron: 32mm/40mm, spindle stroke: 250mm, spindle holder: MK4, max. tapping capacity: M20, spindle table distance min./max.: 270mm/1040mm, table dimensions X/Y/Z: 1150mm/800mm, speed: 4500rpm. Machine dimensions X/Y/Z: approx. 1700mm/1100mm/2600mm, weight: approx. 2000kg. The emergency stop switch of the machine is defective. Documentation available. On-site inspection is possible.
Maszyna-do-formowania-wtryskowego-Arburg-Allrounder-420C-1000-100-370S-700-100 używany
Maszyna do formowania wtryskowego
Arburg Allrounder 420C 1000-100/370S 700-100
Niemcy
2010
używany
na żądanie
INNO28171
There are 3 injection molding machines Arburg including handling robot Stäubli available. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 96839h. Including robot Stäubli RX130 CS7Bm, year of construction 2000. Arburg Allrounder 420C 1000-100, year of construction 2000, screw diameter 25mm, max. injection volume 49cm³, centering 125mm, control Selogica 3.060, operating hours 103227h. Including robot Stäubli RX130 CS7B, year of construction 2000. Arburg Allrounder 370S 700-100, year of construction 2010, screw diameter 15mm/20mm/25mm, centering 125mm, control Selogica direct 4.090, operating hours 49833h. Including robot Stäubli RX130 CS7B, year of manufacture 2000, documentation available. On-site inspection is possible. Individual sale possible.
Robot-liniowy-Krauss-Maffei-LR-300 używany
Robot liniowy
Krauss Maffei LR 300
Niemcy
2008
używany
na żądanie
INNO28170
A Krauss Maffei linear device (handling) for injection molding machines is available. Travel X/Y/Z: 1500mm/2500mm/4000mm, load capacity: 30kg, vacuum: 4x, compressed air: 3x, weight: approx. 650kg, operating hours: 69100h. The Y-axis is slightly skewed. Documentation available. On-site inspection is possible.
Kolumnowy-żuraw-obrotowy-Evers-AS20-3,0 używany
Kolumnowy żuraw obrotowy
Evers AS20-3,0
Niemcy
2018
używany
na żądanie
INNO28168
Load capacity: 2000kg, reach: 3000mm, pre-buffer diameter: 1310mm, swivel range: 270°/180°. Documentation available. On-site inspection is possible.
Prasa-pneumatyczna-Mäder-XL-DA-5600-80-300 używany
Prasa pneumatyczna
Mäder XL-DA 5600-80-300
Niemcy
2018
używany
na żądanie
INNO28166
A Mäder direct-acting compressed air press is available. Pressing force at 6bar: 56kN, max. stroke length: 80mm, compressed air input min./max.: 3.2bar-6bar, max. tool dimensions X/Y: 310mm/220mm, max. tool weight: 14kg, total stopping time: 0.1s. Projection of press head/press frame: 150mm/300mm, working height: 195mm-290mm, table dimensions X/Y: 190mm/190mm, operating hours: 59h. Pressure cell included. Documentation available. On-site inspection is possible.
Tartak-Söderhamn-Eriksson używany
Tartak
Söderhamn Eriksson
Niemcy
2008
używany
na żądanie
INNO28165
A sawmill with integrated log handling and sorting from Söderhamn Eriksson for the production of sawn timber is available. Production capacity: approx. 70000m³-100000m³ per shift, timber thickness range: 150mm-660mm. The log handling and sorting components include the log feeder, a root run-in cutter, a material thickness measurement system for calculating the volume of wood in cubic meters, a cross-cut saw, a metal detector, 13 log storage boxes, an HDS gripper, a debarker, a bark chipper and a fully automatic conveyor system. The components of the sawmill line include a debarking machine, a prism saw, a 4-belt band saw, a 3-belt band saw, a timber edging saw, a board sorting system with 22 pockets, a board stacking system and infeed and outfeed conveyors. Including various accessories such as rolling machine saw belt, sharpening machine saw belt, compressors, rollers, band saws, sawdust discharge and wood hall. The machine has not been used for eight years. Documentation available. On-site inspection is possible.
Maszyna-do-cięcia-płomieniowego-CNC-Messer-Cutting-MultiTherm-Eco-3600 używany
Maszyna do cięcia płomieniowego CNC
Messer Cutting MultiTherm Eco 3600
Niemcy
2021
używany
na żądanie
INNO28160
Track width: 3600mm, table dimensions: 6200x2300/ 3200x2500mm, max. workpiece thickness: 150mm, length: 10,700mm, width: 5070mm, height: 1980mm. With four oxyfuel torches, bevel cutting, segment-by-segment extraction of the areas where firing takes place, automatic gas setting (OmniFlow) for cutting oxygen (max. 15bar), heating oxygen (max. 10bar), fuel gas (max. 2bar), ALFA MS 4452/250 machine cutting torch, OmniWin2021 software. Available from February 2025, an inspection on site is possible.
System-montażu-robotów-Hbi-Robotics-Kuka używany
System montażu robotów
Hbi Robotics/ Kuka
Niemcy
2018
używany
na żądanie
INNO28158
With feed system and Leibinger JET3up small character inkjet printer, has been little used. On-site inspection is possible.
Zakład-obróbki-cieplnej-Paddeltherm używany
Zakład obróbki cieplnej
Paddeltherm
Niemcy
2003
używany
na żądanie
INNO28157
Length: 21,000mm, width: 5000mm. With 3 chest ovens and heatable water bath, with rail system above the ovens, with 2x 8 fans as air cooling unit, switch cabinets Schneider E-Technik Offenburg with S7 1500, was completely overhauled in 2019. On-site inspection is possible.
System-czyszczący-Silberhorn-Multijet-S3 używany
System czyszczący
Silberhorn Multijet S3
Niemcy
2018
używany
na żądanie
INNO28156
Wash basket dimensions: 2x 630x560x200mm, cleaning agent: aqueous cleaner, filling capacity: 3750l, max. back-up fuse: 250A, mains connection: 230/400VAC, connected load: 175kW, control panel: Janitza UMG 96 RM. On-site inspection is possible.
Szlifierka-ze-stołem-obrotowym-Blanchard-42-84 używany
Szlifierka ze stołem obrotowym
Blanchard 42-84
Niemcy
1962
używany
na żądanie
INNO28155
Table diameter: 2133.6mm, grinding head diameter: 1066.8mm, switch cabinet dimensions: 1200x500x2000mm, length: 2700mm, width: 6300mm, height: 4300mm, weight: 35t, including documentation, circuit diagram and history, plus photos of overhaul and repair, geometric overhaul and new switch cabinet in 2005, repair in May 2017, grinding head rewound, stator/ three-phase armature overhauled, grinding shaft/ king shaft overhauled, head with new bearings.
Linia-taktowa-Buffoli-3D-TR-8-4-CNC używany
Linia taktowa
Buffoli 3D-TR-8-4 CNC
Niemcy
2017
używany
na żądanie
INNO28153
A fully automatic rotary transfer system with a Buffoli transfer machine is available. Processes: Loading/contour milling/drilling/chamfering/reaming/pressing. The finished parts are packed, labeled and palletized. Automation: Evolut, robots: Kuka, replenishment control: Kanban. Documentation available. On-site inspection is possible.
System-pomiaru-masy-powierzchniowej-Scantech-HF3-XT10 używany
System pomiaru masy powierzchniowej
Scantech HF3 XT10
Niemcy
2022
używany
na żądanie
INNO28151
A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible.
Prasa-do-formowania-Italpresse-BG-800 używany
Prasa do formowania
Italpresse BG 800
Niemcy
1994
używany
na żądanie
INNO28149
Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible.
Frezarka-narzędziowa-CNC-Deckel-Maho-DMF-220-linear używany
Frezarka narzędziowa CNC
Deckel Maho DMF 220 linear
Niemcy
nieznany
używany
na żądanie
INNO28147
A 5-axis CNC tool milling machine DMG Mori is available. Travel X/Y/Z: 2200mm/560mm/720mm, B-axis: +/-100°, speed: 1800rpm, tool holder: SK40, power at 40%: 35kW, rapid traverse X/Y/Z: 100m/min / 50m/min / 50m/min, feed: 50m/min, table dimensions X/Y: 2600mm/600mm, max. table load: 2200kg, control: Siemens 840D powerline with ShopMill.Table load: 2200kg, control: Siemens 840D powerline with ShopMill. The motor spindle, the Y-axis linear guide and the storage bladder of the machine were replaced in 06/2024.
Sprężarka-Atlas-Copco-SF8 używany
Sprężarka
Atlas Copco SF8
Niemcy
2004
używany
na żądanie
INNO28146
An Atlas Copco oil-free compressor is available.Technology: oil-free scroll compression, max. operating pressure: 7.8bar, volume flow: 13.4l/s or 48.2m³/h, motor power: 7.4kW, speed: 2885rpm, machine dimensions X/Y/Z: approx. 1600mm/750mm/1850mm, machine weight: approx. 400kg.
Chłodnia-Johnson-Controls-sabroe-ChillPAC-108-LV używany
Chłodnia
Johnson Controls/sabroe ChillPAC 108 LV
Niemcy
2019
używany
na żądanie
INNO28138
A Johnson Controls/Sabroe cold storage room with two LP-ChillPAC 108LV chillers is available. Refrigerant: R717, charge weight: 2x120kg, cooling capacity: 2x310kW, pressure unit volume: 4510l. Low pressure side: max. operating pressure: 16bar, test pressure: 17.6bar, operating temperature min./max.: -30°C/+40°C. High pressure side: max. operating pressure: 22bar, test pressure: 24.2bar, operating temperature min./max.: 0°C/+150°C. Documentation available. On-site inspection is possible.
Maszyna-do-worków-rurowych-pionowych-Bosch-SVB-2501-A-SVB-3601-L używany
Maszyna do worków rurowych pionowych
Bosch SVB 2501 A/SVB 3601 L
Niemcy
1996
używany
na żądanie
INNO28135
Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025.