Maszyny Uzywane Niemcy - Innovac GmbH

Maszyna etykietująca

Ses Strassburg SES 80l

Niemcy

2007

używany

na żądanie

INNO28893

An SES labeling machine for round and square cans with two stations is available. Including a 2-lane conveyor belt with a length of 5000 mm. Documentation available. On-site inspection is possible.

więcej

System napełniania kanistrów

Müpeck Montana 3

Niemcy

1992

używany

na żądanie

INNO28891

A canister filling system for the food industry is available. Dosing system: piston dosing unit, container: 80l, dosing cylinder: V4A, control: Knorr, filling range: 1000l-10150l. Documentation available. On-site inspection is possible.

więcej

Wytwórnia koncentratów

Ccm AFN 454 U-S

Niemcy

nieznany

używany

na żądanie

INNO28890

A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible.

więcej

Pompa próżniowa

Nash

Niemcy

2017

używany

na żądanie

INNO28886

Two Nash vacuum pumps in need of overhaul and one overhauled Nash vacuum pump are available. 1) Nash 2BE 1606 1EY3Z, year of manufacture: 2017. 2) Nash 2BE 1606 1EY3Z, year of manufacture: 2005. 3) Nash 2BE 1606 1EY3Z, year of manufacture: 2005. Machine dimensions X/Y/Z: approx. 2750mm/2600mm/19000mm. Documentation available. On-site inspection is possible.

więcej

Gratownica

Eiberle 14-04-3980 MU

Niemcy

2016

używany

na żądanie

INNO28885

A specially built Eiberle reaming machine for pipe blanks is available. Stations: 4, cycle time: 3-5min, machine dimensions X/Y/Z: approx. 3900mm/1050mm/1900mm, weight: approx. 1500kg, control: Siemens, part counter: 40317, including a comprehensive tool package. Documentation available. On-site inspection is possible.

więcej

Uniwersalna szlifierka okrągła CNC

Karstens K11 1000

Niemcy

2014

używany

na żądanie

INNO28884

A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible.

więcej

Piła tarczowa

Gmc KGS 400 E

Niemcy

2002

używany

na żądanie

INNO28883

A vertical panel saw GMC including a small and mobile extraction unit Kemper is available. Cutting dimensions X/Y/Z: 4200mm/2100mm/50mm, max. horizontal cutting height: 1950mm, saw blade outer diameter min./max.: 240/250mm, saw blade inner diameter: 20mm, saw blade speed: 5200rpm, motor power: 3kW, weight: approx. 500kg. Extraction unit Kemper 64100, year of manufacture: 2009, volume flow: 1200m³/h, weight: approx. 80kg. Documentation available. On-site inspection is possible.

więcej

Frezarka narzędziowa

Hurco WM1

Niemcy

1970

używany

na żądanie

INNO28882

Travel X/Y/Z: 400mm/200mm/350mm, spindle: 2, table dimensions X/Y: 700mm/300mm, vertical table dimensions X/Y: 700mm/200mm, machine dimensions X/Y/Z: approx. 1600mm/1900mm/1900mm, weight: approx. 800kg. Including various cutter head holders, drill chucks, Weldon holders, collet holders, boring heads, MK holders and vice with 125mm. On-site inspection is possible.

więcej

Maszyna do formowania wtryskowego

Battenfeld/engel BA 2700-1200 BK/ES 200-45 HLS

Niemcy

1998

używany

na żądanie

INNO28881

Two injection molding machines are available. 1) Battenfeld BA 2700/1200 BK, year of manufacture: 1998, clamping force: 2700kN, platen dimensions X/Y: 900mm/1020mm, tie bar distance X/Y: 630mm/630mm, opening stroke: 550mm, mold height min./max.: 250mm/620mm, max. platen distance: 1170mm, ejector stroke: 160mm. Screw diameter: 55mm, L/D ratio: 22, injection pressure: 1305bar, stroke volume: 913cm³, injection weight: 830g. Machine dimensions X/Y/Z: approx. 6800mm/1900mm/3400mm, weight: approx. 12000kg, control: Unilog 4000, operating hours: approx. 40759h. The machine exhibits faults when switching over. 2) Engel ES 200/45 HLS, year of construction: 1998, clamping force: 45t, platen dimensions X/Y: 550mm/430mm, min. installation height: 180mm, platen distance: 530mm, opening stroke: 350mm, ejector stroke: 100mm. Screw diameter: 25mm, stroke volume: 99cm³, injection pressure: 1400bar, L/D ratio: 20, screw stroke: 140mm. Machine dimensions X/Y/Z: approx. 3300mm/1200mm/1800mm, weight: approx. 3300kg, operating hours: 74165h. The machine has slight leaks in the hydraulics. Documentation available. On-site inspection is possible. Individual sale possible.

więcej

Frezarka uniwersalna CNC

Mikron WF 51 D/TNC 355

Niemcy

1988

używany

na żądanie

INNO28876

Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.

więcej

Wykrawarka

Hms EwZ 03 S7 90/GKNT 250

Niemcy

1990

używany

na żądanie

INNO28875

An HMS punching machine is available. Pressing force: 250t, stroke height: 40mm, installation height: 450mm, ram adjustment: 20mm, stroke rate: 120 strokes/min, overall system dimensions X/Y/Z: approx. 17000mm/8000mm/3500mm. Including coil and strip processing. Documentation available. On-site inspection is possible. Expected to be available from September 2025.

więcej

Sprzęt do hartowania

Kohnle

Niemcy

1995

używany

na żądanie

INNO28874

A complete hardening line for small components is available. 1) Tempering furnace LAG 500-650/150-4000. 2) Drum washing machine DWS 450-1100. 3) Oil bath. 4) Bunker with scales and distribution chute. Total plant length: approx. 14700mm, total plant width: approx. 8500mm, total plant height: approx. 4400mm. Documentation available. On-site inspection is possible.

więcej

Piła mostowa

Weha Master

Niemcy

nieznany

używany

na żądanie

INNO28869

A bridge saw for the mining industry, especially for stone, is available. An on-site visit is possible.

więcej

Prasa hydrauliczna

Hymag HE 15 SSET

Niemcy

1998

używany

na żądanie

INNO28866

A Hymag hydraulic press is available. Pressing force: 15t, pressing pressure: 235bar, stroke: 250mm, drive: V30 D045, motor power: 7.5kW, oil requirement: 200l, run-on time: 40ms, safety distance: 80mm. The machine has a leak on the piston and the position measuring system is not working properly. Documentation available. On-site inspection is possible.

więcej

Tokarka CNC

Traub TNC 42/65 DGY

Niemcy

1996

używany

na żądanie

INNO28865

Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible.

więcej

Tokarka dwuwrzecionowa CNC

Traub TNC 42/65 DGY

Niemcy

2015

używany

na żądanie

INNO28864

A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible.

więcej

Centrum obróbcze CNC

Briesse Rover Plast A FT 1531

Niemcy

2017

używany

na żądanie

INNO28863

Travel X/Y/Z: 3100mm/1530mm/150mm, spindle power: 13.2kW, tool holder: HSK F63, table rotation range: 360°, speed: 24000rpm, tool positions: 16, vacuum pump capacity: 250m³/h, connected load: 35kW, machine weight: approx. 6000kg. Documentation available. On-site inspection is possible.

więcej

System laminowania

Suchy/klieverik/tekatex

Niemcy

2021

używany

na żądanie

INNO28861

A complete laminating line is available. General data: Fabric weight range: 125g/m²-1800g/m², fabric width range: 1050mm-3200mm, upper roller width: 3400mm, creep speed: 2m/min, creep speed: 10m/min, production speed: 100m/min, total system length: 28100mm. 1) Fabric storage infeed and outfeed Suchy, year of construction: 2012, roller width: 3400mm, guide roller diameter: 200mm, max. fabric thickness: 20mm, max. fabric width: 3200mm, fabric storage: approx. 50m, operating speed: 60m/min, machine dimensions X/Y/Z: approx. 4200mm/5550mm/3600mm, weight: approx. 4250kg. 2) Powder control Klieverik, scattering roller width: 3500mm, scattering roller diameter: 188mm, max. scattering width: 3200mm, max. scattering capacity: 2000g/m/min, powder size range: 100µm-600µm, machine dimensions X/Y/Z: approx. 4750mm/600mm/700mm, weight: approx. 1100kg. 3) Laminating machine Klieverik, year of construction: 2012, printing blanket dimensions X/Y/Z: 7310mm/3500mm/7mm, heating power: 100kW, heating cylinder diameter: 760mm, thermal oil tank: 800l, max. working temperature: 240°C, heating time at 3m/min and 6m/min: approx. 2h/3h, machine dimensions X/Y/Z: approx. 2100mm/5000mm/2300mm, weight: approx. 9000kg. 4) Winder Tekatex WL-35, year of construction: 2022/2023, working width: 3500mm, machine dimensions X/Y: 4500mm/1050mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.

więcej

Silnik

Abb M3GP 400LB 8 B3

Niemcy

2008

używany

na żądanie

INNO28860

Speed: 892rpm, current consumption: 660A, Cos: 0.83, power: 355kW, insulation class: F, operating mode: continuous operation. On-site inspection is possible.

więcej

Optyczny system pomiarowy

Keyence LS-9000

Niemcy

nieznany

używany

na żądanie

INNO28859

Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible.

więcej