Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1021 - 1040 of 3055]

Maszyna do nakładania wałkiem

Trivec Rollercoater TRV-450-C duo

Niemcy

2015

używany

na żądanie

INNO30907

A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible.

Roboty przemysłowe

Mitsubishi RV-3SDB S15

Niemcy

2011

używany

na żądanie

INNO30904

An industrial articulated robot Mitsubishi including control unit, teaching box and work table is available. Payload: 3.5kg, axes: 6, reach: 642mm, repeatability: +/-0.02mm, upper arm length: 245mm, forearm length: 270mm, weight: approx. 40kg. Documentation available. An on-site inspection is possible.

Maszyna do formowania wtryskowego

Engel ES 330/80

Niemcy

1996

używany

na żądanie

INNO30901

Clamping force: 800kN, Opening stroke: 450mm, min. tool installation height: 250mm, Plate dimensions X/Y: 660mm/560mm, Tie bar spacing: 403mm/345mm, Ejector stroke: 100mm, Injection volume: 154cm³, Injection pressure: 1600bar, Machine dimensions X/Y/Z: approx. 6000mm/1850mm/2000mm, Weight: approx. 4900kg. An on-site inspection is possible.

Spawarka

Merkle TIG Insquare W600 AC/DC

Niemcy

2016

używany

na żądanie

INNO30899

An industrial TIG welding power source Merkle in AC/DC version is available. Insulation class: S, Cooling: AF, Voltage: 400V, Power factor: 0.95. Documentation available. An on-site inspection is possible.

Tokarka CNC

Index G200

Niemcy

1995

używany

na żądanie

INNO30898

A CNC counter-spindle lathe Index with Y-axis and bar feeder MBL 42 is available. Turning length: 400mm, turning diameter: 420mm, bar capacity: 60mm, speed: 6000rpm, machine dimensions X/Y: 4750mm/1950mm. Documentation available. An on-site inspection is possible.

Automatyczna piła taśmowa

Amada HDA-250

Niemcy

nieznany

używany

na żądanie

INNO30897

A fully automatic hydraulic horizontal band saw Amada in scissor design is available. Round cutting capacity: 254mm, rectangular cutting capacity: 254mm/279mm, saw band dimensions X/Y/Z: 3505mm/27mm/0.9mm, speed: 80m/min, feed: 390mm/stroke, max. cutting length: 3500mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/1500mm, weight: approx. 1250kg. An on-site inspection is possible.

Nożyce gilotynowe

Wieger SW3a

Niemcy

1964

używany

na żądanie

INNO30896

Sheet stop: 1000mm, max. cutting thickness: 10mm, cutting length: 3000mm, weight: approx. 8500kg. The machine complies with accident prevention regulations. The blades must be turned and reground. The drive motor was replaced 4 years ago. Documentation available. An on-site inspection is possible.

Chwytak do małych elementów

Schunk Co-act EGP-C 64-N-N-FCRXEK

Niemcy

2021

używany

na żądanie

INNO30893

Two like-new and originally packaged small parts grippers Schunk for cobots (collaborative robots) are available. Payload: 1150g, number of fingers: 2, stroke: 20mm, max. gripping force: 230N. Machine dimensions X/Y/Z: approx. 161.2mm/125.5mm/86.4mm, weight: approx. 1380g. Documentation available. An on-site inspection is possible.

System mieszania

Konus

Niemcy

nieznany

używany

na żądanie

INNO30892

A freestanding double cone mixer with double-sided bearing support from an unknown manufacturer is available. Capacity: approx. 1000kg. Grinding concentrates (abrasive powders etc.) were mixed with it. No documentation and no CE marking. An on-site inspection is possible.

Maszyna uszczelniająca

Kematec MBK 1 AR

Niemcy

2021

używany

na żądanie

INNO30888

A Kematec MBK 1 AR clocked rotary bottle capper is available. On-site viewing is possible.

Współrzędnościowa maszyna pomiarowa CNC

Keyence VL-500/VL-570

Niemcy

2023

używany

na żądanie

INNO30884

A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

Drukarka szablonowa

Ekra MAT S 40

Niemcy

1989

używany

na żądanie

INNO30882

A stencil screen printing machine Ekra is available. Frame dimensions X/Y: 800mm/570mm, print dimensions X/Y: 500mm/390mm, print speed: 110mm/s, positioning accuracy: +/-0.02mm, squeegee pressure: 320N, table adjustment X/Y: +/-8mm, max. print material thickness: 40mm, machine dimensions X/Y/Z: approx. 1300mm/1050mm/1350mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible.

Szczypce do zaciskania

Eckold MZD 25/3 PH

Niemcy

2025

używany

na żądanie

INNO30881

A total of 10 mobile Eckold clinching pliers, eight of them originally packaged, are available. Stroke frequency: single stroke, input pressure range: 5bar-16bar, max. operating pressure: 500bar, max. pressing force at 500bar: 30kN, max. joining part thickness: 3mm, reach horizontal/vertical: 25mm/15mm, opening dimension: 6mm, working width: 50mm, machine dimensions X/Y/Z: approx. 260mm/60mm/215mm, weight: approx. 6kg. Including pneumohydraulic pressure intensifier and tail insert. Documentation available. An on-site inspection is possible.

Frezarka kolumnowa sterowana numerycznie

Fpt Spacio 20L

Niemcy

2000

używany

na żądanie

INNO30879

Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible.

Rozdrabniacz

Erdwich M600/1-600

Niemcy

2021

używany

na żądanie

INNO30878

A single-shaft shredder Erdwich for contaminant-free red brass and brass chips is available. Cutting unit dimensions X/Y: 600mm/500mm, height: 300mm, knife width: 25mm, screen hole diameter range: 25mm-35mm, machine dimensions X/Y/Z: approx. 1600mm/650mm/800mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible.

Instalacja do produkcji włókniny

Hergeth/autefa/protec/dilo Topliner CL 4000/4002 - WebMax

Niemcy

1990

używany

na żądanie

INNO30877

A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 - WebMax, year of construction: 2006, min. fineness range: 0.7dtex, fiber types: chemical/natural/regenerated/blends, max. web weight: 100g/m², max. web weight with crosslapper: 5000g/m², max. laying width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, lapper lift: 100mm, machine dimensions X/Y/Z: approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions X/Y/Z: approx. 1600mm/3650mm/1650mm. 7) Double needle loom Dilo CBF 31/HVSL 31, year of construction: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, number of needles per 1m working width: approx. 15430, machine dimensions X/Y/Z: approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Web accumulator Suchy WOB 3200, storage volume: 40m³, web weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller top width: 3200mm, machine dimensions X/Y/Z: approx. 4300mm/5050mm/5300mm. 9) Slitting unit Suchy, year of construction: 2006, weight: approx. 250kg. 10) Climbing roll winder, winding roller diameter: 350mm, min. winding diameter: 3inch, max. winding diameter: 1500mm. 11) Edge trimmer Hepp-Schwamborn. 12) X-ray measuring device Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation available. An on-site inspection is possible. Expected to be available from the end of March 2026.

Maszyna do mielenia mięsa

Mado Eskimo MEW 616

Niemcy

nieznany

używany

na żądanie

INNO30876

A cooled table-top meat grinder Mado is available. Cutting set diameter: 82mm, Cutting set version: 3-piece Unger system, Motor power: 1.45kW, Motor speed: 2700rpm, Auger speed: approx. 210rpm, Throughput capacity: approx. 400kg/h, Tray volume: 6l, Machine dimensions X/Y/Z: approx. 550mm/550mm/500mm, Weight: approx. 90kg. An on-site inspection is possible.

Maszyna do odkładania SMD

Essemtec FLX2011-LV

Niemcy

2008

używany

na żądanie

INNO30875

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.

5-osiowe centrum obróbcze CNC

Biesse Rover C 6.65

Niemcy

2009

używany

na żądanie

INNO30872

Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible.

Wielofunkcyjna komora dozująca

Rampf MC-EASY

Niemcy

nieznany

używany

na żądanie

INNO30871

Three identical base modules of the Rampf MC-EASY multifunction dispensing cell are available. Max. robot payload: 3kg, robot reach: approx. 600mm, manual component handling. Dispensing system for 1K and 2K materials, including gap filler and potting applications, material feed: from cartridges, hobbocks and 200l containers, dispensing control Beckhoff, material processing: cartridges, hobbocks, 200l containers, control: robot programming by Fruitcore with 3D real-time visualization of robot movement, with static 1K and 2K dispensing system. With automation module Digital Robot HORST600 and central operating software for all process participants, with 3x side panels and 1x door, comfort handle, profile half cylinder, base plate for the robot as well as consumables, operator console, light barrier, system light each individually positioned, mounted and wired, panels made of Makrolon. An on-site inspection is possible, not under power.