Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [1041 - 1060 of 2661]

Roboty

Stäubli TX60

Niemcy

2017

używany

na żądanie

INNO29390

Two Stäubli robots including control units are available. 1) 2x Stäubli TX60 robots, year of manufacture: 2017, axes: 6, load capacity: 3.5kg, reach: 670mm, repeat accuracy: +/-0.02mm, weight: approx. 50kg, operating hours 1/2: approx. 46000h/52000h. 2) 2x Stäubli CS8C-TX60 controller, year of manufacture: 2017, documentation available. On-site inspection is possible.

Roboty

Stäubli RX160L

Niemcy

2017

używany

na żądanie

INNO29389

Two Stäubli robots including controller and stand are available. 1) 2x Stäubli RX160L robots, year of manufacture: 2017, axes: 6, payload nominal/maximum: 14kg/28kg, reach: 2010mm, repeat accuracy: +/-0.05mm, max. speed: 12.3m/s, weight: approx. 250kg, operating hours: approx. 52000h. 2) 2x Stäubli CS8C-RX160 controllers, year of manufacture: 2017. 3) 2x robot stands for Stäubli RX160L. Documentation available. On-site inspection is possible.

Tokarka centralna

Pinacho L-1/180

Niemcy

1990

używany

na żądanie

INNO29388

Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible.

Magazyn do podajnika barów

Breuning Irco ILS RBK 10012

Niemcy

2005

używany

na żądanie

INNO29385

Bar diameter min./max.: 5mm/102mm, bar length min./max.: 150mm/1200mm, machine length: approx. 1950mm, machine width: approx. 950mm, machine height: spindle height+345mm, machine weight: approx. 450kg. Documentation available. On-site inspection is possible.

Piła tarczowa do metalu

Kaltenbach/adige SC 425

Niemcy

nieznany

używany

na żądanie

INNO29383

A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible.

Podnośnik próżniowy

Automac

Niemcy

nieznany

używany

na żądanie

INNO29382

A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible.

Maszyna do cięcia

Wohlenberg 115 MCS-2 TV

Niemcy

1985

używany

na żądanie

INNO29381

Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV. Documentation available. On-site inspection is possible.

Pakowarka do tacek

Italian Pack Oceania VAC SKIN

Niemcy

2017

używany

na żądanie

INNO29373

A semi-automatic Italian Pack traysealer machine is available. Packaging output with VAC/GAS: 4-5 cycles/min, packaging output with SKIN: 3 cycles/min, vacuum pump output: 63m³/h, max. packaging depth: 120mm, film diameter range: 250mm-340mm, max. film width: 370mm, machine dimensions X/Y/Z: approx. 1100mm/1100mm/1400mm. Including automatic film rewinder. Documentation available. On-site inspection is possible.

Maszyna termoformująca

Italian Pack Atlantis 20

Niemcy

2022

używany

na żądanie

INNO29372

A small table-top vacuum machine (vacuum chamber machine) Italian Pack is available. Chamber dimensions X/Y/Z: 370mm/420mm/180mm, vacuum pump capacity: 16m³/h, max. utilization time per day: 5h. Documentation available. On-site inspection is possible.

System regranulacji

Erema IntErema 756 K

Niemcy

2017

używany

na żądanie

INNO29371

Material throughput: LDPE: 110kg/h, PA6.0/LDPE/EVOH: 150kg/h, PP/PA6.0/LDPE/EVOH: 135kg/h, PA6.0/LDPE: 120kg/h, EVA/LDPE: 150kg/h. Nominal output: 77kW, PCU output: 30kW, extruder output: 18.5kW, motor output: 10.7kW, heating zones: 1, heating output: 12kW. Documentation available. On-site inspection is possible.

Pozostałe zapasy

Miveg/fp International Mini PakR

Niemcy

2012

używany

na żądanie

INNO29366

Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible.

Pozostałe zapasy

Joos/frommia/schwabedissen/ayen FS 60

Niemcy

1985

używany

na żądanie

INNO29365

Various old woodworking machines are available. 1) Joos triple veneer press. 2) Frommia FS 60 post router, year of manufacture: 1985. 3) Schwabedissen planer. 4) Column drilling machine Ayen. On-site inspection is possible.

Laserowa maszyna do cięcia CO2

Sei S.p.a. PL 121 DieCut

Niemcy

1999

używany

na żądanie

INNO29363

Working range X/Y: 1200mm/1600mm. Travel Z: 250mm. Max. table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. On-site inspection is possible.

Disolwer kadziowy

Grieser GFVD 750 FU

Niemcy

2009

używany

na żądanie

INNO29360

A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible.

Frezarka uniwersalna CNC

Deckel FP 5 CCT

Niemcy

1990

używany

na żądanie

INNO29359

Travel X/Y/Z: 800mm/600mm/550mm, table diameter: 630mm, max. table load: 300kg, swivel range B: -15°/45°, turning range C: 360°, spindle speed: 6300rpm, power: 12kW, tool positions: 40, tool holder: SK40, feed: 10m/min, rapid traverse: 6m/min. Machine dimensions X/Y: approx. 3200mm/3000mm, weight: approx. 5750kg, control: Grundig Dialog 11, including chip conveyor and cooling lubricant system Knoll PF 50, year of manufacture: 1989. On-site inspection is possible.

Tokarka

Dmt KD 400 TWIN

Niemcy

2018

używany

na żądanie

INNO29358

A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.

Maszyna do walcowania i foliowania

Schüco Isomat 4

Niemcy

1994

używany

na żądanie

INNO29356

A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible.

Obrotowa pompa tłokówa

Netzsch Tornado T.Proc T2

Niemcy

2019

używany

na żądanie

INNO29355

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

Pionowe centrum obróbcze CNC

Röders RFM 600

Niemcy

2000

używany

na żądanie

INNO29354

A Röders vertical CNC high-speed machining center is available. Travel X/Y/Z: 600mm/450mm/300mm, speed: 42000rpm, tool holder: HSK-E40, power: 14kW, table dimensions X/Y: 700mm/500mm, max. workpiece weight: 800kg, feed: 30m/min, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3500mm/3100mm/2700mm, weight: approx. 5200kg, control: Röders, operating hours: approx. 60894h. Including extraction system and chiller. Documentation available. On-site inspection is possible.

Podgrzewacz oleju termicznego

Htt wtö-rg 1000-40-1-X-H

Niemcy

2016

używany

na żądanie

INNO29353

Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible.