Maszyny Uzywane Niemcy - Innovac GmbH

Maszyna do erozji iskrowej

Wagner Maschinen DM-323

Niemcy

1988

używany

na żądanie

INNO29811

Two DM-323 electrical discharge machines are available. Operating hours machine 1/2: 12,134.51 / 32,704.5 h. Operating manuals and circuit diagrams available. An on-site inspection is possible.

więcej

Silniki niskonapięciowe

Siemens SIMOTICS SD 1LE5/ 1LE1

Niemcy

2021

używany

na żądanie

INNO29810

A total of 12 low-voltage motors are available, 4x SIMOTICS SD 1LE5 and 8x SIMOTICS SD 1LE1. (1) SIMOTICS SD 1LE5, Motor type: Three-phase asynchronous motor, low voltage, cast iron housing, Severe Duty series SIMOTICS SD (model range 1LE5), protection class: standard IP55, insulation class: Class F, operating mode: continuous duty S1 according to IEC/DIN EN 60034-1, environment: -20°C to 40°C, up to 1000m above sea level. (2) SIMOTICS SD 1LE1, rated voltage: standard voltages, operating mode: continuous duty S1, housing: cast iron (Severe Duty), cooling: self-ventilated, insulation class: F (temperature class 155 / utilization B), speed range: 750-3600/min, max. rated torque: approx. 1703 Nm. The motors are still unused, the year of construction is 2021/22. An on-site inspection is possible.

więcej

Uniwersalny system do wędzenia i gotowania

Bayha & Strackbein 1500C

Niemcy

1999

używany

na żądanie

INNO29804

Two identical smoking and cooking systems are available. Suitable for the production and refinement of sausages and meat products, poultry, fish, cheese and baked goods, hot smoking, warm smoking, cold smoking, moist smoking, intensive smoking, quick smoking, reddening, sweating, scalding, steaming, cooking, hot air cooking, semi-preservation, baking, roasting and defrosting. Heating capacity: 24kW, connected load: 31.5kW. With operating manual. An on-site inspection is possible.

więcej

Piła taśmowa

Meber SR700

Niemcy

2017

używany

na żądanie

INNO29803

Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible.

więcej

Urządzenie odśrodkowe

Walther Trowal TT 90-A/2C-V9

Niemcy

2018

używany

na żądanie

INNO29802

Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible.

więcej

Maszyna CNC do erodowania drutu

Charmilles Technologies Robofil 6000

Niemcy

1990

używany

na żądanie

INNO29801

With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible.

więcej

Ręczny wózek widłowy

Combilift COMBI-WR4

Niemcy

2023

używany

na żądanie

INNO29800

Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible.

więcej

Stacja grzewcza

Global Vacuum Presses Ecotherm Professional GET-P-3114-ZZ

Niemcy

2015

używany

na żądanie

INNO29798

Heating surface: 3200x1480mm, 2x heating plate dimensions: 2120x1480/1060x1480mm, max. temperature: 180°C, connected load: 17.8kW, length: 3300mm, width: 1650mm, height: 1100mm, weight: 887kg. Elements: insulated lid, lid handle, quick-release clamps, industrial rollers with stoppers, electrical switch box/control panel, U-shaped support rails, signal light tower, POWER signal light, on/off timer switch, digital timer, temperature control unit left heating plate, temperature control unit right heating plate, on/off switch left heating plate, on/off switch right heating plate, RESET push button, EMERGENCY STOP switch, signal light circuit breaker (BREAKER), main switch. With documentation. An on-site inspection is possible.

więcej

Tokarka

Tislar TIS-140 NP

Niemcy

2000

używany

na żądanie

INNO29796

Rated current: 16A, rated fuse current: 16A, control voltage: 24V, rotational speed: 63-4500/min, connected load: 2.5/3kW, control panel: RATIONAL, weight: 1.05t. With digital display: rational 3-axis display (X, Y, Z) for precise position reading, headstock: conventional drive with change gears for thread cutting, tailstock: manually movable with handwheel, support: top slide and cross slide, manually operable, emergency stop and operating elements. An on-site inspection is possible.

więcej

Frezarka do gwintów

Mikron 132.02

Niemcy

nieznany

używany

na żądanie

INNO29795

Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.

więcej

Wykrawarka portalowa ruchoma

Leiner KKD-50

Niemcy

2003

używany

na żądanie

INNO29794

Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

więcej

Wykrawarka portalowa ruchoma

Leiner KKD-30

Niemcy

2000

używany

na żądanie

INNO29793

Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

więcej

Wykrawarka portalowa ruchoma

Leiner KKD-50

Niemcy

2004

używany

na żądanie

INNO29792

Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible.

więcej

Centrum tokarsko-frezarskie z podwójnym wrzecionem CNC

Spinner TTS 65-DUPLEX

Niemcy

2020

używany

na żądanie

INNO29791

X1-/ X3-axis: 180mm, X2-axis: 180mm, Y1-/ Y3-axis: ±45mm, Z1-/ Z3-axis: 704mm, Z2-axis: 620mm, E2-axis: 720mm, rapid traverse X, Y, Z-axis: 30m/min, spindle 1: max. speed: 5000/min, spindle bore: 65mm, chuck diameter: 210mm, spindle 2: max. speed: 7000/min, spindle bore: 42mm, max. chuck diameter: 140mm, spindle nose diameter: 110mm, max. chuck jaw weight: 1.25kg, number of stations: 2x12, number of driven tool stations: 2x12, max. speed: 8000/min, power S3 25%: 4.3kW, torque S3 25%: 13.6Nm. Length: 2880mm, width: 2130mm, height: 1990mm, weight: 7.5t, operating hours: 16,597.7h. Including bar feeder Top Automazioni X-FILES S, year of manufacture 2020, 4x tool holders, straight, left-right square mount, external coolant, 4x machine interface: BT45A, 1x milling head 90°/BMT 45 Spinner, angled milling head/ BMT45/ ESX-25 right and left twin-spindle, Spinner flat coupling, ER25 max. speed: 6000/min, i=1:1, raised design with center distance 85mm, 1x cut-off holder, rotation direction universal, external coolant. Regularly maintained, maintenance records available, an on-site inspection is possible.

więcej

Maszyna do erodowania drutu

Agie AGIECUT 220

Niemcy

1995

używany

na żądanie

INNO29790

X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible.

więcej

Przenośnik taśmowy

Dorner FlexMove

Niemcy

2021

używany

na żądanie

INNO29788

Conveyor belt width: 105mm, drive motor power: 0.37kW, installation dimensions: 1600x1380.5mm, height: 725mm. Includes operation and maintenance manual, conveyor belt, guide frame, feet, drive motors, power supply and additional elements. With extensive documentation, the machine is completely dismantled. An on-site inspection is possible. The conveyor belt can be assembled in various ways.

więcej

Maszyna do układania

Essemtec FLX2011-LV

Niemcy

nieznany

używany

na żądanie

INNO29787

An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible.

więcej

System opróżniania pojemników

Netzsch BEF 200

Niemcy

2003

używany

na żądanie

INNO29786

A stationary and a mobile container emptying system (drum emptying) Netzsch are available. Drum size: 100l/200l, drive power: 15kW, max. delivery pressure: 8bar, delivery rate: approx. 1000l/h, speed: 1450rpm, max. liquid viscosity: 1000Pas. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm. Documentation available. An on-site inspection is possible.

więcej

Zgrzewarka do folii

Joke HTMST 1000LA

Niemcy

nieznany

używany

na żądanie

INNO29785

A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible.

więcej

Rama napinająca

Brückner SPR 2

Niemcy

nieznany

używany

na żądanie

INNO29784

A package with a Brückner stenter frame and additional elements is available: 1) Brückner stenter frame SPR 2, 2) Goller washing machine, 3) ECO-Heat exhaust air purification system for Brückner stenter frame, 4) Foulard with Küsters control unit and hydraulic unit, 5) Pleva SL 2.1 entry straightening unit, 6) RS Scheuchl heat recovery system, 7) Pleva SL 2P exit straightening unit. An on-site inspection is possible.

więcej