Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [601 - 620 of 2665]

Maszyna do cięcia strumieniem wody CNC

Expert Systemtechnik/bft cutEXPERT variojet/Servotron 40.45+

Niemcy

2020

używany

na żądanie

INNO30054

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Piła

Hakumag FM1-R

Niemcy

1979

używany

na żądanie

INNO30053

A lifting, filing, and sawing machine Hakumag is available. Table dimensions X/Y/Z: approx. 290mm/290mm, stroke: 10mm–80mm, throat depth: 155mm, table swivel: +/-15°, weight: approx. 120kg. An on-site inspection is possible.

Tokarka CNC

Emco Turn 345

Niemcy

1998

używany

na żądanie

INNO30052

Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible.

Centrum obróbcze CNC

Heller MC 16

Niemcy

1998

używany

na żądanie

INNO30051

Travel X/Y/Z: 630mm/630mm/630mm, B-axis: 360°, B-axis resolution: 0.001°, Tool holder: SK40, Tool positions: 160, Pallet positions: 6, Pallet dimensions X/Y: 400mm/500mm, Rapid traverse: 40m/min, ICS pressure: 50bar. Machine dimensions X/Y/Z: approx. 5850mm/2500mm/2750mm, Weight: approx. 12500kg, Control: Siemens Sinumerik 840D. Including Blum probe and drill breakage control. Documentation available. An on-site inspection is possible.

Giętarka trzpieniowa

Sommer S65

Niemcy

nieznany

używany

na żądanie

INNO30047

A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible.

Głowica frezująca

Pfauter-gleason Genesis 130 H/P200/PE250

Niemcy

nieznany

używany

na żądanie

INNO30045

Three milling heads for different machines of the brand Pfauter-Gleason are available. 1) Milling head for Gleason Genesis 130H. 2) Milling head for Pfauter P200, without counter bearing. 3) Milling head for Pfauter PE250. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Stama MC 520

Niemcy

1994

używany

na żądanie

INNO30044

A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible.

Prasa do gięcia krawędzi

Knuth AHK 3180

Niemcy

2005

używany

na żądanie

INNO30043

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Oczyszczacz powietrza

Crt Roomguard RG01

Niemcy

2020

używany

na żądanie

INNO30041

Three room air filtration units CRT RoomGuard are available. Air volume flow: 2000m³/h, pre-filter: F7, main filter: HEPA H14, max. efficiency (aerosols/viruses): 99.9%, machine dimensions X/Y/Z: approx. 1300mm/800mm/700mm, weight: approx. 110kg. Documentation available. An on-site inspection is possible.

Maszyna tkacka

Dornier HTV8-SD

Niemcy

1991

używany

na żądanie

INNO30040

A Dornier weaving machine is available. Working width: 3300mm. Documentation available. Including heald frames. Without prewinder. On-site inspection is possible.

Gehrungsbandsäge

Meba E 220 G

Niemcy

nieznany

używany

na żądanie

INNO30039

Saw band dimensions X/Y/Z: 2450mm/27mm/0.9mm, max. cutting capacity at 90°: 220mm/220mm, max. cutting capacity at 45°: 150mm/150mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 1300mm/800mm/1500mm, weight: approx. 250kg. An on-site inspection is possible.

Wkładka do lasagne

Pavan R/PS

Niemcy

2001

używany

na żądanie

INNO30038

Four loading units Pavan for lasagna sheets in industrial production lines are available. Capacity: approx. 250 trays/h, format range: 200mm/150mm, machine dimensions X/Y/Z: approx. 1800mm/850mm/1650mm, weight: approx. 325kg. An on-site inspection is possible.

Centrum obróbcze CNC

Fritz Werner TC 800

Niemcy

1984

używany

na żądanie

INNO30037

Travel X/Y/Z: 1600mm/1000mm/1100mm, workpiece carrier (pallets) X/Y: 800mm/800mm-1000mm, change time: 38s, table rotation range: 360°, max. table load capacity: 2000kg, feed rate: 10m/min, rapid traverse: 15m/min, spindle power: 32kW, tool positions: 50, spindle taper: ISO50, speed: 4500rpm. Machine dimensions X/Y: 5800mm/5200mm, weight: approx. 25000kg. Documentation available. An on-site inspection is possible.

Instalacja susząca

B+b FH50/150V

Niemcy

2008

używany

na żądanie

INNO30036

A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible.

Odciąg wiórów i filtr

Krämer VFM-P/VKA-P/VFM-R/GFS Shake 160 25 250

Niemcy

2009

używany

na żądanie

INNO30034

A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg 270M

Niemcy

1995

używany

na żądanie

INNO30033

Clamping force: 500kN, tie bar distance: 270mm/270mm, opening stroke: 325mm, min. mold installation height: 225mm, max. platen opening: 550mm, clamping platen dimensions X/Y: 500mm/500mm, machine dimensions X/Y/Z: approx. 3700mm/1400mm/1900mm, weight: approx. 1750kg. An on-site inspection is possible.

Stołowa maszyna próżniowa

Multivac C370

Niemcy

2011

używany

na żądanie

INNO30031

A semi-automatic vacuum chamber packaging machine Multivac is available. Chamber dimensions X/Y/Z: 900mm/440mm/160mm, sealing bars: 2x440mm, sealing type: double-seam cut-off sealing, chamber height: 160mm, max. vacuum pump capacity: 150m³/h, machine dimensions X/Y/Z: approx. 1100mm/600mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible.

Maszyna do testowania kół zębatych stożkowych

Gleason 13-Zoll Power Gear T.

Niemcy

2005

używany

na żądanie

INNO30030

A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.

Instalacja do przesiewania

Schinke

Niemcy

nieznany

używany

na żądanie

INNO30029

A plastic laser sintering unit is available. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. An on-site inspection is possible.

Instalacja do przesiewania

Schinke EOS P3

Niemcy

2004

używany

na żądanie

INNO30028

An unpacking and screening station Schkinke Anlagenbau for the 3D printer EOS P3 is available. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. Including build frame. An on-site inspection is possible.