Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [581 - 600 of 3047]

Jednowrzecionowe automaty tokarskie sterowane krzywką

Index C 29

Niemcy

nieznany

używany

na żądanie

INNO31483

Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement.

Tokarka uniwersalna

Bernardo TITAN 560x2000 VARIO

Niemcy

nieznany

używany

na żądanie

INNO31481

Center distance: 2000mm, center height: 280mm, swing over bed: 560mm, swing over gap: 785mm, swing over carriage: 350mm, bed width: 350mm, spindle bore: 105mm, spindle speed range: 25-200/ 200-1500rpm, longitudinal feed range: 0.059-1.646mm/rev, cross feed range: 0.020-0.573mm/rev, metric threads: 0.2-14mm, quill diameter: 75mm, quill travel: 180mm, quill taper: MT 5, motor power: 7.5kW, length: 3340mm, width: 1150mm, height: 1460mm, weight: 2.72t. Equipment: 3-axis digital readout ES-12 V with LCD display, 3-jaw chuck PS3-315mm / D8, max. steady rest passage diameter: 180mm, max. follow rest passage diameter: 120mm, foot pedal with brake function according to CE, protective device for quick-change tool post, LED machine light, initial filling with Shell Tellus 46, two center points, frequency inverter, digital speed display, slip clutch, rapid traverse longitudinal and cross, coolant system, quick-change tool post with 4 holders, change gears, reduction sleeve, chip splash guard, operating tools. An on-site inspection is possible.

Pionowe centrum obróbcze

Hurco VMX 60/40T

Niemcy

nieznany

używany

na żądanie

INNO31480

Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible.

Giętarka obrotowa

Thalmann THAKO 30-8,2 M

Niemcy

2010

używany

na żądanie

INNO31479

A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible.

W pełni zautomatyzowana maszyna do zaciskania

Schleuniger C 62-2

Niemcy

nieznany

używany

na żądanie

INNO31478

A fully automatic Schleuniger cable processing machine with two stations is available. Stations: 2, system: Cut-Strip-Terminate, conductor cross-section range: 0.15mm²-6mm², AWG range: 26-10, min. cable length: 60mm, max. cable length: 65000mm, max. feed rate: 12m/s, stripping length: 0mm-45mm, swivel movement range: 0°-90°, crimping force: 20kN. Machine dimensions X/Y/Z: approx. 3650mm/1850mm/1300mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

Szybkoobrotowa wiertarka promieniowa

Donau DANUMERIC 440

Niemcy

2018

używany

na żądanie

INNO31477

A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement.

W pełni zautomatyzowana maszyna do zaciskania

Schleuniger CC 64-2

Niemcy

2009

używany

na żądanie

INNO31476

A fully automatic cable processing machine Schleuniger with two stations and one compact station Strunk is available. Cable length range: 55mm-65000mm, conductor cross-section range: 0.13mm²-6mm², max. stripping length: 18mm, max. feed speed: 12m/s. Machine dimensions X/Y/Z: approx. 3750mm/1450mm/1850mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible.

Rynna załadowcza

Moduflex N300 TH Y1/5

Niemcy

nieznany

używany

na żądanie

INNO31475

There are 15 identical loading systems available. Product-contact parts made of stainless steel 1.4301, outlet diameter: 400mm, nominal diameter: DN 300, extended length: 5237mm, retracted length: 1252mm, telescopic length (stroke): 2885mm, max. loading capacity: approx. 50t/h, connected load: 0.55kW, weight: 245kg. An on-site inspection is possible.

Gramofon

Stöber

Niemcy

nieznany

używany

na żądanie

INNO31473

Two identical turntables are available, the manufacturer and year of manufacture are unknown. They have undergone regular electrical inspections, fully functional, no documentation is available. The year of manufacture is estimated to be 2010. An on-site inspection is possible.

Tokarka

Martin DLZ 602

Niemcy

1961

używany

na żądanie

INNO31463

Turning diameter over bed: 600mm, turning length: 1000mm, spindle head: 8, spindle bore: 63mm, tailstock quill size: MK5, gap: yes, faceplate diameter: 500mm, machine dimensions X/Y: 2800mm/1100mm, weight: approx. 2200kg. Including quick-change tool holder Multifix C, faceplate and coolant device. The front guide of the machine is worn and the feed in the apron is blocked. The bed slides can be moved via the lead screw. Documentation available. An on-site inspection is possible.

Drukarka atramentowa UV

Fujifilm Acuity LED 1600 II

Niemcy

2019

używany

na żądanie

INNO31461

A Fujifilm UV flatbed and roll printing system is available. Roll weight: 25kg, max. roll media width: 1620mm, max. rigid media width: 1610mm, min. media width: 210mm, max. media thickness: 13mm, max. roll outer diameter: 180mm, media core diameter: 2inch/3inch, max. print length: 3030mm, media guidance: 170mm. Machine dimensions X/Y/Z: approx. 3250mm/800mm/1550mm, weight: approx. 300kg. The system was only used from December 2019 until early 2024. Documentation vorhanden. An on-site inspection is possible.

Automatyczna piła taśmowa

Jaespa COMPACT 2

Niemcy

2011

używany

na żądanie

INNO31452

A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement.

System cięcia plazmowego

Kjellberg HiFocus 130 / PGV 2 / PGC

Niemcy

2010

używany

na żądanie

INNO31451

A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement.

Frezarka CNC

Cmc BF-01

Niemcy

1992

używany

na żądanie

INNO31450

A bed milling machine is offered. Spindle drive: 25kW, table clamping surface X/Y: 1250mm/500mm, travel paths X/Y/Z: 1000mm/500mm/600mm, tool holder: ISO 40, feed rate: 0mm - 3000mm/min. Equipped with CNC control, coolant system, electronic handwheel, machine weight: approx. 4200kg, machine dimensions X/Y/Z: approx. 2800mm/2400mm/2500mm. Inspection possible by arrangement.

Piła tarczowa chłodnicza

Trennjaeger LTS-400 M

Niemcy

1989

używany

na żądanie

INNO31449

A longitudinal circular splitting saw is offered. Saw blade Ø: 400mm, cutting length: 400mm, cutting depth: 130mm, integrated coolant system, swiveling saw head for miter cuts, manual feed, base cabinet. Inspection possible by arrangement.

Nożyce gilotynowe

Atlantic ATS

Niemcy

1990

używany

na żądanie

INNO31448

A guillotine shear is offered. Cutting length: 3000mm, cutting capacity steel: 2mm - 6mm, cutting capacity stainless steel: 3mm. Equipped with back gauge, front support tables, finger protection guard. Inspection possible by arrangement.

Urządzenie do wstępnego ustawiania narzędzi

Royal Basic

Niemcy

2004

używany

na żądanie

INNO31447

A tool presetting device is offered. Axes: 2 (X/Z), position display: EPA 3001 2-axis LED display, tool holder: SK steep taper, projection measuring head with sighting device, pneumatic tool clamping, integrated compressed air maintenance unit including pressure gauge, fine adjustment via handwheels, zero point storage, measured value hold function. Weight: approx. 95kg, overall dimensions X/Y/Z: approx. 600mm/550mm/1100mm. Inspection possible by arrangement.

Prasa jednokolumnowa

Hans Schoen UTE-B

Niemcy

1977

używany

na żądanie

INNO31446

A single-column press is offered. Press force: 30000kg, table area X/Y: approx. 600mm/450mm, protective field height: 300mm, safety distance: 110mm, stopping distance: 18mm. SICK light barrier safety system, manual handwheel adjustment, analog pressure display, external control cabinet, foot switch preparation. Weight: approx. 3200kg, overall dimensions X/Y/Z: 1400mm/1800mm/2400mm. Inspection possible by arrangement.

Prasa przegubowa pneumatyczna

Gechter 45 kN HKPL

Niemcy

2011

używany

na żądanie

INNO31445

A pneumatic toggle press is offered. Press force: 4500kg, stroke: 40mm, throat depth: 125mm, working height: 60mm - 320mm. Pneumatic foot switch, piece counter, maintenance unit, mechanical height adjustment, base frame, T-slot table X/Y: 200mm/160mm. Weight: approx. 185kg, overall dimensions X/Y/Z: approx. 800mm/650mm/1850mm. Inspection possible by arrangement.

Pneumatyczna prasa kolanowa

Gechter 45 kN HKPL

Niemcy

2012

używany

na żądanie

INNO31444

A pneumatic toggle press is offered. Press force: 4500kg, stroke: 40mm, throat depth: 125mm, working height: 60mm - 320mm. Machine frame, maintenance unit, mechanical fine adjustment, T-slot table X/Y: 200mm/160mm. Weight: approx. 180kg, overall dimensions X/Y/Z: approx. 800mm/600mm/1800mm. Inspection possible by arrangement.