Maszyny Uzywane Niemcy - Innovac GmbH

Pakowacz

Flema Otto Fleischer

Niemcy

1994

używany

na żądanie

INNO30408

Offered is a bottle packer/bottle case packer year 1994. Euro bottle 20 x 0.5l, capacity approx. 200crates/h, regularly maintained. A viewing is possible by arrangement.

więcej

Maszyna do nawijania i kontroli

Polymaster pm-iv 180

Niemcy

nieznany

używany

na żądanie

INNO30406

Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible.

więcej

Piec z obiegiem powietrza

Nabertherm N500/45A

Niemcy

2001

używany

na żądanie

INNO30405

Max. operating temperature: 450°C, number of fans: 1, fan power: 0.75kW, power loss: 8kW, voltage: 400V, phases: 3, frequency: 50Hz, power supply: 26/26/32A, connected load: 18kW, control panel: Program Controller C40. With full documentation. The oven is in good condition, has been inspected regularly, and was in operation until recently. An on-site inspection is possible.

więcej

Nożyce gilotynowe

Ed. Paskowsky S.a. ECLAIR ASS 4MM

Niemcy

1980

używany

na żądanie

INNO30403

Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.

więcej

Maszyna do druku cyfrowego uv

Durst Tau 330

Niemcy

2014

używany

na żądanie

INNO30402

Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible.

więcej

Maszyna do kontroli optycznej

Göpel OptiCon Basic Line X30

Niemcy

2009

używany

na żądanie

INNO18578

Software: OptiCon Pilot 5.1, with documentation, camera and lighting module, 3x repair work place software for defect visualisation and 4GB RAM computer, was last maintained in 2013.

więcej

Drukarka szablonowa

Tws Automation SR3100

Niemcy

2010

używany

na żądanie

INNO30396

Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment.

więcej

Urządzenie pomiarowe

Man 200KN/9606

Niemcy

1984

używany

na żądanie

INNO30394

Offered is a material tensile testing machine year 1984. Shear force tensile tests on reinforcing steel, max. tensile force 200kN, clamping device, external control unit. Viewing possible by appointment.

więcej

Urządzenie pomiarowe

Amsler Wolpert 40 THZ – 400KN

Niemcy

1979

używany

na żądanie

INNO30392

Offered is a tensile testing machine year 1979 with retrofitted Doli testing software. Test material reinforcing steel, max. tensile force approx. 400kN, clamping tool: VAS Prüftechnik & Werkzeugbau year 2015. Inspection possible by arrangement.

więcej

Prostownica do drutu

Niemcy

1990

używany

na żądanie

INNO30390

Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement.

więcej

Linia do mokrej obróbki waflów

Robotechnik Europe OPTIwet ST30

Niemcy

nieznany

używany

na żądanie

INNO30389

System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement.

więcej

Wykrawarka obrotowy

Kocher + Beck

Niemcy

nieznany

używany

na żądanie

INNO30388

Offered is a Kocher + Beck rotary die cutter/rotary die cutting technology. SKK: scale front stop 5, scale on cylinder 9, 10bar, Mini B (pressure downward): scale front stop 11, scale on cylinder 5, 20bar, Memobox carton: scale front stop 3, scale on cylinder 11, 40bar, Memobox insert: scale front stop 5, scale on cylinder 5 & 2mm, 10bar. Inspection by appointment possible.

więcej

Metalowa drukarka 3D

Nikon Slm Solutions SLM280 2.0 Single 700W

Niemcy

2022

używany

na żądanie

INNO30386

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control, build volume X/Y/Z: 280mm/280mm/365mm minus thickness of substrate plate, 3D optics configuration: Single single/double 400W/700W, Dual 400W/700W IPG fiber laser, build rate: 113cm³/h, layer thickness: 20μm-90μm, feature size: 150μm, beam focus diameter: 80μm-115μm, scan speed max.: 10m/s, inert gas consumption process: 5l/min (argon), inert gas consumption purging: 110l/min (argon). Accessories: chiller package HRS050 L/W, screening station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder containers, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, machine dimensions X/Y/Z: 2600mm/1200mm/2700mm. Inspection possible by arrangement.

więcej

Młyn walcowy do kawy

Mazzer/schärf Stark/XMill-Protect

Niemcy

nieznany

używany

na żądanie

INNO30384

A total of 23 Mazzer Luigi/Schärf coffee grinders are available. Grinding system: conical, grinding diameter: 71mm, motor power: 900W, speed: approx. 430rpm. Machine dimensions X/Y/Z: approx. 285mm/820mm/400mm, weight: approx. 25kg. Some grinders come with a separate key that will be provided. One grinder is defective. Documentation vorhanden. An on-site inspection is possible.

więcej

Zadanie Talerz obrotowy

Seema

Niemcy

nieznany

używany

na żądanie

INNO30382

Offered is a feed turntable for bottle infeed/collection table, diameter 1000mm, motor drive clockwise. Viewing is possible by arrangement.

więcej

Automatyczna maszyna do owijania taśmą

Strapex SMA 30

Niemcy

2016

używany

na żądanie

INNO30381

Offered is a fully automatic strapping machine for PP strap, year 2006. The machine has defects. Electronic strap tension control 50-450N, polypropylene (PP) strapping band width: 12mm, core diameter X/Y 200mm/280mm, heat-seal joint, cycle performance 30 strappings/min, package dimensions X/Y: min approx. 100mm/30mm, machine dimensions X/Y: 1450mm/600mm, working height: 800mm, weight: approx. 220kg. Inspection possible by arrangement.

więcej

Plattenfilter

Seitz Orion 60A-100

Niemcy

1988

używany

na żądanie

INNO30380

A sheet filter (EK filter) Seitz Orion is available. Plate dimensions X/Y: 600mm/600mm, number of plates: 80, filter area: approx. 22m², filtration capacity: 45hl/h, connection: DN50. Machine dimensions X/Y/Z: approx. 3300mm/1000mm/1500mm, weight: approx. 1250kg. An on site inspection is possible.

więcej

Kartoniarka

Uhlmann C130

Niemcy

2001

używany

na żądanie

INNO30377

A horizontal, intermittently operating cartoning machine Uhlmann is available. Pitch: 5inch, closure types tuck-in flaps/hot glue, cartoning output: approx. 12-150 folding cartons/min, min. format dimensions X/Y/Z: 70mm/30mm/15mm, max. format dimensions X/Y/Z: 150mm/100mm/85mm. Machine dimensions X/Y/Z: approx. 1500mm/3100mm/900mm, weight: approx. 1000kg, control: Siemens HMI. The control of the machine is defective. Documentation vorhanden. An on-site inspection is possible.

więcej

Banderolownica foliowa

Pester Pac Pewo-pack 250 K

Niemcy

2000

używany

na żądanie

INNO30376

A fully automatic Pester Pac strapping banding machine for folding boxes is available. Unit output: 40/min, min. carton dimensions X/Y/Z: 30mm/15mm/60mm, max. carton dimensions X/Y/Z: 150mm/90mm/180mm, min. bundle dimensions X/Y/Z: 60mm/30mm/60mm, max. bundle dimensions X/Y/Z: 360mm/180mm/250mm. Film width range: 50mm-250mm, film thickness range: 25m-80µm, max. film roll diameter: 300mm, max. insertion dimensions X/Y/Z: 180mm/400mm/200mm, max. sealing width: 250mm. Machine dimensions X/Y/Z: approx. 2100mm/1100mm/2100mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

więcej

Maszyna do kartonów

Uhlmann C130

Niemcy

2000

używany

na żądanie

INNO30375

A horizontal, intermittently operating cartoning machine Uhlmann is available. Pitch: 5inch, closing types tuck-in flaps/hot glue, cartoning output: 12-150cartons/min, min. format dimensions X/Y/Z: 70mm/30mm/15mm, max. format dimensions X/Y/Z: 150mm/100mm/85mm. Machine dimensions X/Y/Z: approx. 1500mm/3100mm/900mm, weight: approx. 1000kg. Dokumentation vorhanden. A visit on site is possible.

więcej