Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [541 - 560 of 2861]

Tartak

Costa/esterer/zeno/zimac Leonard/Multiprisma 35/WD/HD30

Niemcy

1993

używany

na żądanie

INNO31090

Various old sawmill machines are available. 1) Double shaft saw Costa Leonard, max. cutting height: 200mm, max. cutting width: 350mm, weight: approx. 5000kg. 2) Step feeder Esterer WD, max. log length: 6000mm. 3) Frame saw Esterer HD 30, frame opening: 710mm, stroke: 600mm. Including accessories. 4) Multi blade saw Costa Multiprisma 35, max. log length: 6000mm. 5) Drum chipper Zeno, drive power: 55kW. 6) Board stacking machine Zimac, working length range: 800mm-3000mm. 7) Steel chimney stack Schicks, height: approx. 50m, diameter: approx. 1400mm. Documentation available. An on site inspection is possible. Individual sale possible by arrangement.

Kocioł parowy

Loos UHD

Niemcy

1997

używany

na żądanie

INNO31089

A horizontal fire-tube/smoke-tube boiler Loos with a 2-pass system is available. Steam output: 2000kg/h, max. operating overpressure: 11.5bar, fuel: oil/gas. An on-site inspection is possible.

Kocioł parowy

Certuss Junior 600

Niemcy

2009

używany

na żądanie

INNO31088

Three identical Certuss steam generators are available. Year of manufacture: 2008/2009/2010, steam output: 600kg/h, pressure vessel volume: 42.9l, set pressure: 10bar, test pressure: 57bar. Machine dimensions X/Y/Z: 1650mm/900mm/2000mm, weight: approx. 950kg. Documentation available. An on-site inspection is possible.

Frezarka CNC

Knuth EcoMill 350 CNC

Niemcy

2013

używany

na żądanie

INNO31087

A Knuth CNC vertical milling machine is available. Travel X/Y/Z: 385mm/230mm/385mm, table dimensions X/Y: 800mm/240mm, max. table load: 100kg, reach: 300mm, speed: 3000rpm, rapid traverse: 6m/min, feed rate: 2m/min. Machine dimensions X/Y/Z: approx. 1850mm/1650mm/2000mm, weight: approx. 1500kg, control: Knuth GPlus 450. Documentation available. An on-site inspection is possible.

Maszyna do formowania wtryskowego

Dr. Boy 50T2 185-50

Niemcy

1992

używany

na żądanie

INNO31086

An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg, operating hours: 10524h. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible.

Kondensator

Kelvion 3329.RF-SJ102L2H-8

Niemcy

2008

używany

na żądanie

INNO31084

Medium: HCFC/HFC 2, max. operating temperature: 32bar, min. temperature: -40°C, max. temperature: 120°C, coil volume: 11.6l, weight: approx. 65kg. Documentation available. An on-site inspection is possible.

Piła taśmowa

Behringer HBP 220-HY

Niemcy

1994

używany

na żądanie

INNO31082

Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible.

Szlifierka do powierzchni CNC

Jung J 630 C

Niemcy

1999

używany

na żądanie

INNO31081

Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.

Urządzenie z przepływem laminarnym

Bleymehl Flora-DF III-965

Niemcy

2005

używany

na żądanie

INNO31080

A laminar flow unit Bleymehl for aseptic product protection is available. Total air volume flow: 1200m³/h, electrical power: 0.4kW, machine weight: approx. 90kg. Including one replacement curtain. The machine was manufactured in 2005, however only commissioned in 2018. Documentation available. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Chiron FZ 12 L

Niemcy

1991

używany

na żądanie

INNO31076

Travel X/Y/Z: 1600mm/400mm/425mm, table dimensions X/Y: 2000mm/400mm, max. table load: 350kg, tool positions: 12, tool holder: SK30, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/2300mm/2800mm, weight: approx. 5000kg, control: Siemens Sinumerik. The hoses, the Y-axis cover, and the battery (data loss) are in need of repair. An on-site inspection is possible.

Prasa krawędziowa CNC

Weinbrenner GP 125

Niemcy

1986

używany

na żądanie

INNO31075

Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.

Elektrownia wiatrowa

Vestas V52-MK3

Niemcy

2005

używany

na żądanie

INNO31074

A total of five identical Vestas wind turbines are expected to be available from early 2027. Rated power: 850kW, rotor area: 2124m², rotor blades: 3, rated speed: 26rpm, generator voltage: 690V, gearbox stages: 3, cut-in wind speed: 4m/s, rated wind speed: 16m/s, cut-out wind speed: 25m/s, tower material: steel, hub height: 74m, nacelle weight: 22t, rotor weight: 10t. Documentation available. An on-site inspection is possible. Individual sale possible.

System mieszania

Wam MESC 300

Niemcy

2023

używany

na żądanie

INNO31073

A continuous twin-shaft paddle mixer WAM is available. Throughput capacity range: 5m³-12m³/h, max. liquid addition: 20%, material: 1.4404, process: mixing/conditioning/granulation/neutralization, weight: approx. 700kg. Documentation available. An on-site inspection is possible.

System mieszania

Wam WBHP 15000

Niemcy

2013

używany

na żądanie

INNO31072

A horizontal single-shaft plowshare batch mixer WAM is available. Nominal volume: 15000l, usable volume: 10500l, mixing ratio: 1:100000, max. residual quantity: 0.1%, discharge angle: 15°, number of shafts: 1, mixing chamber material: carbon steel. Machine dimensions X/Y/Z: approx. 6150mm/2800mm/2550mm, weight: approx. 8000kg. Documentation vorhanden. An on-site inspection is possible.

Maszyna do napełniania i zamykania

Hamba BF 5012/2-Glas

Niemcy

1992

używany

na żądanie

INNO31071

A rotary indexing filling machine Hamba for piston-based dosing of liquid and viscous products is available. Cup diameter: 75mm, max. height: 80mm, filling volume range: 50ml-250ml, filling capacity: 4000/h, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.

Napełniacz kubków

Gasti

Niemcy

nieznany

używany

na żądanie

INNO31070

A Gasti cup filling and sealing machine for preformed round cups, which has been used in the dairy industry, is available. Cup diameter: 95mm, output range: 2500-4500cups/h, filling volume range: 50ml-500ml, max. product temperature: 100°C, max. product pressure: 2bar. An on-site inspection is possible.

Centrum obróbcze CNC z kolumną ruchomą

Matec 30L

Niemcy

2000

używany

na żądanie

INNO31069

Machining length X: 5000mm, machine dimensions X/Y/Z: approx. 7500mm/3500mm/3500mm, weight: approx. 14000kg, control system: Heidenhain 426, operating hours: 91758h, running hours: 36086h. Including tool changer and tool holders. Without extraction system. Documentation available. An on-site inspection is possible.

System czyszczący

Mea L160

Niemcy

1998

używany

na żądanie

INNO31068

Basket dimensions: 1100x1100mm, usable height: 800mm, max. load weight: 700kg, spray pressure: 4.3bar, ambient temperature: 5-40°C, max. washing temperature: 90°C, material of media-contact parts: stainless steel V2A, power connection: 55A. With control cabinet and documentation. An on-site inspection is possible.

Maszyna etykietująca

Khs/anker Roland 10/4

Niemcy

2009

używany

na żądanie

INNO31067

A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible.

Tokarka CNC

Eguro Nuclet-10A

Niemcy

1995

używany

na żądanie

INNO31066

A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible.