Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [501 - 520 of 2670]

Miernik lepkości

Alpha Technologies MV2000

Niemcy

nieznany

używany

na żądanie

INNO30175

An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.

Reometr

Alpha Technologies MDR 2000

Niemcy

nieznany

używany

na żądanie

INNO30174

A Moving Die Rheometer Alpha for rheological testing and vulcanization analysis of rubber compounds is available. Test standards: ASTM D5289/ISO6502, max. temperature: 200°C, frequency: 1667Hz, strain: 0.2°/0.5°, test pressure: 8000kPa. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Chiron Mill 2000 350-10

Niemcy

2013

używany

na żądanie

INNO30172

Travel X/Y/Z: 2000mm/610mm/630mm, tool holder: SK40, spindle speed: 9000rpm, tool stations: 40, rapid traverse: 60m/min, table dimensions X/Y: 2100mm/720mm, max. table load: 1000kg. Control: Siemens Sinumerik 840D, operating hours: 18272h. Including conveyor and coolant system. Documentation available. An on-site inspection is possible.

Pionowe centrum obróbcze CNC

Dmg DMC 1035 V eco

Niemcy

2009

używany

na żądanie

INNO30171

Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible.

Tokarka CNC

Dmg NEF 600

Niemcy

2011

używany

na żądanie

INNO30170

Swing diameter over bed/cross slide: 600mm/410mm, turning length: 1190mm, travel X/Z: 320mm/1250mm, speed: 3000rpm, spindle bore: 75mm, torque: 785Nm, tailstock taper: MK5, tool stations: 8, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5500kg, control: Siemens Sinumerik 840D powerline, operating hours: 22407h. Including conveyor and chip breaker. Documentation available. An on-site inspection is possible.

Wirówka filtracyjna

Alfa Naval IFB 303X-73

Niemcy

2001

używany

na żądanie

INNO30169

An Alfa Naval disc stack centrifuge module for separating foreign oil from water-based coolants is available. Speed: 7500rpm, throughput with water-based coolant: approx. 480l/h, max. medium temperature: 70°C. Machine dimensions X/Y/Z: approx. 650mm/550mm/1200mm, weight: approx. 60kg. An on-site inspection is possible.

Maszyna do formowania wtryskowego

Arburg/demag/engel 270M/420C/370C/320M/viva/ES

Niemcy

2003

używany

na żądanie

INNO30168

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible.

Maszyna do formowania wtryskowego

Arburg Allrounder 375 V 500-100

Niemcy

2016

używany

na żądanie

INNO30167

An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.

Kastenwaschanlage

Klotzki Spiral 2000x2000

Niemcy

2011

używany

na żądanie

INNO30166

A Klotzki spiral crate washing machine for open plastic beverage crates is available. Crate dimensions X/Y in longitudinal flow: 400mm/300mm, crate dimensions X/Y: 200mm/300mm, crate height range: 270mm-300mm, conveying direction: cross flow, throughput capacity: 1500-2000crates/h, treatment section: approx. 34m, number of units: 48pieces, material: stainless steel, treatment time at 1700 and 2400crates/h: approx. 91s/65s, crate infeed height: 1100mm, crate outfeed height: 4100mm. Machine dimensions X/Y/Z: approx. 3000mm/2000mm/5000mm, weight: approx. 1500kg, control system: Logo. Without platform. The crate indexing and spraying units may need repair. Documentation available. A visit on site is possible.

Linia do produkcji torebek

Roll-o-matic Compact 860l

Niemcy

2012

używany

na żądanie

INNO30165

A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.

Owijarka do palet

Huras Airplast WP

Niemcy

nieznany

używany

na żądanie

INNO30164

Turntable diameter: 1500mm, max. pallet height: 2400mm, max. pallet weight: 2000kg, rotation speed: 8rpm, film carriage pre-stretch: 200%. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2650mm, weight: approx. 1200kg. An on-site inspection is possible.

Piec z obiegiem powietrza

Nabertherm N500/65HA

Niemcy

2015

używany

na żądanie

INNO30162

A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible.

Automatyczna podajarka

Fossaluzza CSES

Niemcy

2008

używany

na żądanie

INNO30161

A Fossaluzza feeding unit for the automatic supply of sheet stacks for carton production is available. Stack height with pallet: 2000mm, min. sheet dimensions X/Y: 450mm/500mm, max. sheet dimensions X/Y: 1200mm/1700mm, roller conveyor infeed height: 320mm, roller conveyor speed: 12m/min, max. output capacity: 18000sheets/h, correction range: +/-150mm. Machine dimensions X/Y/Z: approx. 6050mm/4500mm/3500mm, weight: approx. 9000kg. Documentation available. An on-site inspection is possible.

Pozioma wiertarko-frezarka CNC

Wotan Rapid 5P

Niemcy

1992

używany

na żądanie

INNO30160

A Wotan CNC horizontal boring and milling machine is available. Travel X/Y/Z: 8000mm/3500mm/1000mm, travel W/U: 700mm/1600mm, table dimensions X/Y: 8000mm/4500mm, plate fields: 2, rotary-shift table dimensions X/Y: 2500mm/2000mm, max. table load: 25000kg, spindle speed: 2000rpm, tool positions: 60, power: 63kW, control: Siemens Sinumerik 850M. Includes 4x 90° angle heads. Documentation available. An on-site inspection is possible.

Wiertarko-frezarka CNC

Schiess Froriep FB 225

Niemcy

1987

używany

na żądanie

INNO30159

A CNC travelling column boring and milling machine Schiess is available. Travel X/Y/Z: 10500mm/5000mm/1200mm, quill stroke: 1250mm, quill diameter: 225mm, speed: 750rpm, spindle power: 100kW, spindle torque: 18000Nm, tool holder: SK50/SK60. Machine dimensions: approx. 17000mm/11000mm/8400mm, controls: Siemens 850M. Without platen field. Documentation available. An on-site inspection is possible.

Szlifierka

J. Jungers/wmw/rausch L20/Gratomat 300 L

Niemcy

1967

używany

na żądanie

INNO30158

Two tool grinding machines from WMW and Jungers as well as one gear deburring and chamfering machine from Rausch are available. 1) Tool grinding machine J. Jungers L20. 2) Tool grinding machine WMW Gotha. 3) Deburring machine Rausch 300 L, year of manufacture: 1967, speed: 25000rpm. An on-site inspection is possible.

Tokarka centralna

Nardini ND22AE/1500

Niemcy

1987

używany

na żądanie

INNO30157

A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible.

Tokarka cykliczna CNC

Boehringer VDF DUS 560

Niemcy

1993

używany

na żądanie

INNO30156

Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible.

Tokarka do ciężkich przedmiotów

Ravensburg KT 600

Niemcy

1971

używany

na żądanie

INNO30155

A heavy face lathe Ravensburg is available. Center height: 600mm, faceplate diameter: 800mm, turning diameter over bed/cross slide: 900mm/1200mm, max. turning length: 600mm, max. workpiece weight: 350kg, weight: approx. 6100kg. An on-site inspection is possible.

Maszyna do walcowania

Lorenz S360

Niemcy

1965

używany

na żądanie

INNO30154

A vertical gear shaping machine Lorenz is available. Module: 6.5, stroke: 120mm, max. gear diameter: 900mm, max. workpiece weight: 180kg, min. concentricity: 0.1mm, min. squareness: 0.05mm, roundness: 0.1mm. An on-site inspection is possible.