Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [521 - 540 of 2670]

Frezarka do kół zębatych

Liebherr L 1202

Niemcy

1982

używany

na żądanie

INNO30153

Cutter speed: 250rpm, max. machinable module: 16/DP1.5, max. workpiece diameter: 1250mm, table diameter: 1100mm, indexing gear diameter: 987mm, workpiece bore: 250mm, workpiece insertion depth: 525mm, min. cutter adjustment above table: 390mm, cutter slide travel: 1000mm, rapid traverse: 800mm/min, max. table load: 8000kg, weight: approx. 21000kg. Documentation available. An on-site inspection is possible.

Tokarka centralna

Boehringer M670

Niemcy

1982

używany

na żądanie

INNO30152

A conventional screw-cutting lathe Boehringer is available. Swing over bed/cross slide: 690mm/415mm, distance between centers: 1500mm, cylindricity deviation (tapered) over 100mm: 0.15mm, roundness deviation: 0.02mm, total runout: 0.02mm, perpendicularity deviation over 200mm: 0.05mm, chuck diameter: 630mm-700mm. An on-site inspection is possible

Tokarka karuzelowa CNC

Dörries CTE 160

Niemcy

1978

używany

na żądanie

INNO30151

A Dörries CNC vertical turning lathe is available. Faceplate diameter: 1600mm, turning diameter: 1800mm, turning height: 1500mm, max. travel: 1200mm, faceplate speed: 200rpm. Machine dimensions X/Y/Z: approx. 8400mm/4500mm/5300mm, weight: approx. 25000kg, control system: R&D. The machine’s electrical system and control were completely overhauled in 2010 by R&D Steuerungstechnik. Documentation available. An on-site inspection is possible.

Prasa dziurkująca

Ebu HK 80 FR

Niemcy

2016

używany

na żądanie

INNO30150

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

Linia wytłaczarki

Battenfeld/gloenco PS-Schaum

Niemcy

1998

używany

na żądanie

INNO30149

A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe.

Tokarka CNC

Emag VL 2

Niemcy

2018

używany

na żądanie

INNO30148

A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Micromill Challenger MM430

Niemcy

2012

używany

na żądanie

INNO30147

Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.

Podwójna piła ukośna

Mange Jixie MG-841

Niemcy

2012

używany

na żądanie

INNO30146

A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.

Roboty

Franka Robotics Panda

Niemcy

2018

używany

na żądanie

INNO30145

Three identical Franka Robotics robots are available. Axes: 7, max. payload: 3kg, max. reach: 855mm, repeatability: +/-0.1mm, max. acceleration: 15m/s², weight: approx. 25kg. Documentation available. An on-site inspection is possible.

Tokarka

Weiler MDU 260

Niemcy

1977

używany

na żądanie

INNO30143

A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible.

Analizator sieci

Hp 8753D/3325A

Niemcy

nieznany

używany

na żądanie

INNO30142

Several vector network analyzers and one synthesizer-based HP function generator are available. 1) 3x HP 8753D, frequency range: 30kHz-6GHz, option: 006, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 2) 6x HP 8753D, frequency range: 30kHz-3GHz, option: Standard, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 3) HP 3325A, max. frequency range: 21MHz, resolution: 1µHz, max. amplitude: 10V. Machine dimensions X/Y/Z: approx. 450mm/150mm/450mm, weight: approx. 15kg. All devices were calibrated in 2019. Documentation available. On-site inspection possible.

Zakład napełniania i zamykania

Alwid Superior 48HV/10PP

Niemcy

2019

używany

na żądanie

INNO30141

A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.

Wiertarka słupowa

Snow TA-3-S/TA-3

Niemcy

nieznany

używany

na żądanie

INNO30139

Two similar Snow column drilling machines are available. 1) Snow TA-3, speed: 700rpm, table dimensions X/Y: 460mm/270mm, vertical table adjustment: 255mm, spindle taper: MK1. 2) Snow TA-3-S, speed: 1000rpm, table dimensions X/Y: 460mm/270mm, spindle taper: MK1. An on-site inspection is possible.

Maszyna nawijająca

Blume & Redecker AM 100/AM150

Niemcy

1980

używany

na żądanie

INNO30137

Two bench coiling machines by Blume & Redecker are available. 1) AM 100, year of manufacture: 1980, max. wire diameter: 3.75mm, winding length: 600mm, max. spool diameter: 340mm. 2) AM 150, wire diameter range: 0.16mm–13.2mm, spindle distance: 80mm, center height: 300mm, swing diameter: 600mm, max. speed: 1000rpm, turning diameter: 500mm. Machine dimensions: approx. 850mm/1900mm/1350mm. An on-site inspection is possible.

Maszyna do obróbki kabli

Metzner Triathlon

Niemcy

2001

używany

na żądanie

INNO30136

An automatic cutting, stripping, and crimping machine by Metzner for stranded wires and cables is available. Feed rate: 60m/min, cable length range: 160mm-999mm, cable length tolerance: +/-0.5%, max. stripping length 1/2: 70mm/40mm. Conductor cross-section range: 0.14mm²-6mm², outer cable diameter: 6mm, crimping force: 15kN, cutting accuracy per 100mm: +/-0.2mm, throughput: approx. 1200 wires/h. Machine dimensions X/Y/Z: approx. 1650mm/1250mm/1650mm, weight: approx. 400kg. On-site inspection is possible.

System mieszania

Khs Paramix CMX 28

Niemcy

1992

używany

na żądanie

INNO30135

A two-component mixing/carbonation system by KHS for the production of still and/or carbonated beverages is available. Throughput capacity: approx. 12000l-25000l/h, tank volume degassing/buffer: 2m³/2m³, mixing accuracy: +/-0.05°Brix, CO2 dosing accuracy: +/-0.1g/l, CIP cycle rinsing time: 20min. Machine dimensions X/Y/Z: approx. 3000mm/2200mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Maszyna do inspekcji pustych butelek

Heuft InLine II IR/ HBBIP II//

Niemcy

2013

używany

na żądanie

INNO30134

A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

Etykieciarka na zimny klej

Krones Ergomatic

Niemcy

2011

używany

na żądanie

INNO30133

A cold glue labeling machine by Krones is available. Concept: rotary type, label type: cut paper labels, max. label width: 180mm, labeling capacity: approx. 6000 bottles/h, machine dimensions X/Y: approx. 3000mm/3000mm, weight: approx. 3500kg. Documentation available. On-site inspection possible.

Centrum do cięcia strumieniem wody

Water Jet Sweden NCH30B

Niemcy

2017

używany

na żądanie

INNO30132

Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible.

Centrum obróbcze CNC

Tbi MVC 1890

Niemcy

2013

używany

na żądanie

INNO30131

Travel X/Y/Z: 1800mm/900mm/900mm, table dimensions X/Y: 1950mm/900mm, max. table load: 3000kg, tool holder: SK40, max. spindle speed: 12000rpm, feed rate: 12m/min, repeatability: +/-0.003mm, positioning accuracy: +/-0.005mm, weight: approx. 17000kg, control: Heidenhain. Documentation available. An on-site inspection is possible.