Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [621 - 640 of 3094]

Centrum obróbcze CNC

Hurco VMX50T

Niemcy

2008

używany

na żądanie

INNO31716

A repair-required Hurco vertical 3-axis machining center is offered, including spindle through-coolant, 3D tool and a chip conveyor. Travels X/Y/Z: 1270mm/660mm/610mm, rapid traverse: 30m/min, feed rate: 15m/min, operating hours: approx. 47646h, max. spindle speed: 12000rpm, tool positions: 40, tool holder: HSK40, control system: Winmax. Bearing damage in the X-axis. A new spindle was installed in 2018. Inspection possible by appointment.

Centrum obróbcze CNC

Hurco VMX64 / 40T

Niemcy

2002

używany

na żądanie

INNO31715

A CNC machining center by Hurco requiring repair is offered, including spindle through-coolant and a chip conveyor. Travels X/Y/Z: 1625mm/860mm/760mm, operating hours: approx. 39025h, max. spindle speed: 8000rpm, tool stations: 40, tool holder: HSK40, cover of the Z-axis is defective. Inspection possible by appointment.

Instanityzator nawilżający

Niro Atomizer Kopenhagen F10 ABC06

Niemcy

1970

używany

na żądanie

INNO31714

Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible.

Sprężarka

Ingersoll Rand/m. Schneider MH22/Blitz D2N 1500 A/U

Niemcy

2001

używany

na żądanie

INNO31713

Two old compressors are available. 1) Oil-lubricated screw compressor Ingersoll Rand SSR MH 22, year of manufacture: 2001, max. operating pressure: 10bar, power: 25.5kW, weight: approx. 500kg. 2) Oil-lubricated piston compressor Blitz D2N 1500 A/U, year of manufacture: 1979, max. operating pressure: 15bar, air flow rate: 1400l/min, power: 15HP. An on-site inspection is possible.

Spychacz

Massey Ferguson D 400 LC

Niemcy

1977

używany

na żądanie

INNO31712

Operating hours: 4280h, Track shoe width: 550mm, Track gauge: 1520mm, Track contact length: 2090mm, Undercarriage length: 2080mm, Blade width: 3000mm, Machine dimensions X/Y/Z: approx. 52050mm/1900mm/1850mm, Weight: approx. 10000kg. An on-site inspection is possible.

Piła tarczowa do metalu

Mep Tiger 352

Niemcy

2015

używany

na żądanie

INNO31711

A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible.

Centrum obróbcze CNC

Mikron UM 710/900

Niemcy

1998

używany

na żądanie

INNO31710

A Mikron CNC vertical machining center is available. Travel X/Y/Z: 900mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: approx. 500kg, tool holder: SK40, speed: 5000rpm, rapid traverse: 10m/min, feed: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 5000kg, control: Mikron, operating hours: approx. 35580h. The main control board of the machine has a defect. Including approx. 100 SK40 tool holders and tools. An on-site inspection is possible.

Centrum obróbcze CNC

Mazak VTC 200-B II

Niemcy

2005

używany

na żądanie

INNO31709

A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible.

Linia do układania i cięcia

Bullmerwerk/wastema Komet II / ESV20 - 160

Niemcy

1985

używany

na żądanie

INNO31708

A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.

Magazyn do podajnika barów

Iemca/irco Vip 80-E/REX 7208

Niemcy

2008

używany

na żądanie

INNO31707

A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible.

Tartak

Baljer & Zembrod/linck/vollmer Asterix/U 71/CNE

Niemcy

1998

używany

na żądanie

INNO31706

A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible.

Stół montażowy

Asco RSAB/SSAB

Niemcy

nieznany

używany

na żądanie

INNO31705

An Asco Rail assembly and disassembly stand for brake slack adjusters with a functional testing device is available. Operating pressure: 6bar, max. test force: 100kN, cylinder stroke: 300mm. Documentation available. An on-site inspection is possible.

Szlifierka CNC

Schneeberger Sirius HPM

Niemcy

2010

używany

na żądanie

INNO31704

A Schneeberger CNC profile and tool grinding machine including robot cell, coolant filtration system and cooling unit is available. Travel X/Y/Z: 420mm/310mm/340mm, spindle power: 15kW, speed: 6000rpm, spindle interface: HSK80, robot: Fanuc, tool positions: 10. Machine dimensions X/Y/Z: approx. 2500mm/2500mm/2200mm, weight: approx. 9000kg, control: Fanuc 160i-MB, software: Schneeberger Quinto 4, operating hours: approx. 31893h. Documentation available. An on-site inspection is possible.

Piec spiekalniczy

Degudent Cercon Heat

Niemcy

nieznany

używany

na żądanie

INNO31703

A DeguDent high-temperature sintering furnace for dental zirconium oxide for sintering pre-sintered zirconium oxide crowns, bridges and frameworks is available. Temperature: 1350°C, machine dimensions X/Y/Z: approx. 500mm/650mm/550mm, weight: approx. 80kg. An on-site inspection is possible.

Maszyna wiążąca

Schneider TC-5500

Niemcy

nieznany

używany

na żądanie

INNO31702

A Schneider hot-melt perfect binding machine is available. Cover material weight range: 82g-300g/m², max. binding length: 320mm, min. book block dimensions X/Y: 60mm/120mm, max. book block dimensions X/Y: 320mm/300mm, min. cover dimensions X/Y: 330mm/480mm, max. cover dimensions X/Y: 330mm/680mm, book thickness range: 2mm-50mm, max. binding capacity: 300books/h. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1350mm, weight: approx. 250kg. An on-site inspection is possible.

Prasa do forniru

Siemens K2012

Niemcy

1964

używany

na żądanie

INNO31701

A Siemens high-frequency veneer and gluing press is available. Pressing force: 100t, high-frequency power: 6kW, press area X/Y: 2000mm/1200mm. An on-site inspection is possible.

Maszyna do nitowania elementów grzejnych

Kvt HES 2010 D-T2

Niemcy

2017

używany

na żądanie

INNO31699

A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible.

Prasa do belowania

Mac Fab MF LH300

Niemcy

2020

używany

na żądanie

INNO31698

A paper and cardboard baling press Bema is available. Motor power: 2.2kW, pressing force: 20t, opening dimensions X/Y: 596mm/1200mm, bale dimensions X/Y/Z: 1200mm/800mm/1000mm, max. bale weight: 300kg, cycle time: 40s, hydraulic oil filling: 24l, machine dimensions X/Y/Z: approx. 1800mm/1100mm/1950mm, weight: approx. 1150kg. Documentation available. An on-site inspection is possible.

Jednostka sterująca temperaturą

Gwk teco vario wh 120

Niemcy

2016

używany

na żądanie

INNO31697

A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment.

Piła tarczowa do metalu

Thomas 315 L SUP

Niemcy

1987

używany

na żądanie

INNO31696

Offered is a Thomas miter circular saw for metal profiles, pipes and bar stock. Saw blade diameter: 315mm, saw blade dimensions: 315/2.5/32mm, saw blade bore: 32mm, saw blade speeds: 41/82rpm, miter range left/right: 45°/45°, machine dimensions X/Y/Z: 500mm/850mm/1440mm, weight: approx. 128kg. Inspection possible by appointment.