Maszyny Uzywane Niemcy - Innovac GmbH

Innovac GmbH Used machines from Germany

Przykład Centrum Obróbcze

Innovac maszyny-uzywane

Najnowsze oferty [641 - 660 of 2606]

Przenośnik magazynu prętów

Siemens PL EA 1

Niemcy

nieznany

używany

na żądanie

INNO29132

Various spare parts are available for bar feeders that are used in SMD assembly lines to feed electronic components. 1-2) 2x Siemens PL EA 1 type 3 bar magazine feeders. 3-7) 5x Siemens PL EA type 3 bar magazine feeders. 8-11) 4x adapters for X-series feeder modules. The units are approx. 10 years old. Documentation available. On-site inspection is possible.

Przenośnik wibracyjny

Fuji 2UDLFY000100

Niemcy

2023

używany

na żądanie

INNO29131

A vibratory stick feeder from FUJI for feeding electronic components in stick magazines is available. The device was repaired and calibrated in 2023. Accessories included. Documentation available.

Pojemnik ze stali nierdzewnej

Niemcy

nieznany

używany

na żądanie

INNO29128

A total of 15 (15x) stackable IBC containers for bulk goods are available. The containers were used in the food industry for the storage of spices, but have no foreign odor. Volume: approx. 750l, steel type: stainless steel 1.4301, mandrel lid diameter: 400mm, drain disk valve: DN 250, container dimensions X/Y/Z: approx. 1200mm/1000mm/1450mm. On-site inspection is possible.

Disolwer kadziowy

Vollrath VDDX 50

Niemcy

1972

używany

na żądanie

INNO29126

A Vollrath multi-shaft mixing plant is available. Container volume: 700l, max. batch capacity: approx. 700kg, agitator disks: 3, agitator disk diameter: 275mm, speed: 2000rpm, motor power: 36kW, stroke: 950mm, machine dimensions X/Y/Z: approx. 2200mm/1250mm/2400mm, weight: approx. 2600kg. Documentation available. On-site inspection is possible.

System inspekcji SMD

Saki Spider/BF-Frontier II

Niemcy

2008

używany

na żądanie

INNO29124

Two inspection machines for the semiconductor industry, specifically for PCB production, are available. 1) 3D solder paste inspection system Saki SPI-Spider, year of manufacture: 2007, inspection type: tomography, 2) automatic optical inspection system Saki AOI System BF-Frontier II, year of manufacture: 2008, resolution: 18µm, min. board dimensions X/Y: 60mm/50mm, max. board dimensions X/Y: 500mm/460mm, board warp: +/- 50mm. PCB dimensions X/Y: 500mm/460mm, PCB warp: +/-2mm, component clearance top/bottom: 40mm/40mm, rotation: 359°, transport height: 900mm, transport height adjustment: +/-20mm, machine dimensions X/Y/Z: approx. 850mm/1350mm/1250mm, weight: approx. 450kg. Documentation available. On-site inspection is possible.

Rotator PCB

Nutek NTM 0410 TXL-1000-1 (P)

Niemcy

2018

używany

na żądanie

INNO29123

A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Destacker

Nutek NTM 220 DSXL-FW

Niemcy

2007

używany

na żądanie

INNO29122

A PCB destacker (PCB feeder) for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed: 12m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB thickness range: 0.6mm-4mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, max. PCB stacking height: 220mm, machine dimensions X/Y/Z: approx. 700mm/1000mm/1300mm, weight: approx. 200kg. Documentation available. On-site inspection is possible.

Kolumnowy żuraw obrotowy

Vetter Meister M25-6,0

Niemcy

2010

używany

na żądanie

INNO29121

Swivel range: 304°, load capacity: 2500kg, max. hoist weight: 225kg, max. lifting speed: 16m/min, outreach: 6000mm, lifting height: 4000mm, lower edge jib: 4680mm, overall height: 5250mm, beam flange width: 200mm, jack length: 1540mm, diameter flange/hole circle: 810mm/730mm, foundation edge length: 2750mm, electric chain hoist Liftket, overall height: 659mm, main lift: 5000mm/min, fine lift: 1250mm/min, main and fine speed: 20m/5m/min, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Urządzenie do chłodzenia wody

Hyfra VWK 50/1-S

Niemcy

2005

używany

na żądanie

INNO29119

A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.

Centrum obróbcze CNC

Cms Avant

Niemcy

1999

używany

na żądanie

INNO29117

A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.

Jednostka sterująca temperaturą

Gwk weco 09 A

Niemcy

2009

używany

na żądanie

INNO29116

Connected load: 4.55kW, cooling capacity: 9kW, circulation medium temperature: 30°C, refrigerant: R 134a, filling weight: 2.13kg, max. operating overpressure: 21bar, compressor volume flow: 11.46m³/h, compressor speed: 2900rpm, compressor discharge pressure: 22.6bar. Documentation available. On-site inspection is possible. The appliance was only used for a few hours for test purposes.

Wózek widłowy

Gangcha CQDB16

Niemcy

2023

używany

na żądanie

INNO29115

Load capacity: 1600kg, load center: 500mm, drive: electric, mast: Triplex, lifting height: 3600mm, fork length: 1200mm, fork carriage width: 902mm, turning radius: 1800mm, machine dimensions X/Y: approx. 2450mm/1050mm, operating hours: 62h. Documentation available. On-site inspection is possible.

Pompa próżniowa

Rietschle Twister VSB 120

Niemcy

2006

używany

na żądanie

INNO29114

Five Rietschle vacuum pumps including vacuum pump stands, switch cabinet and accessories are available. 1-2) Dry-running screw vacuum pump Rietschle Twister VSB 120, year of manufacture: 2006, intended use: continuous distillation, suction pressure: approx. 100mbar, back pressure: atmosphere, pumping speed: approx. 60m³/h, max. suction temperature: 60°C. 3-5) Three further vacuum pumps, year of manufacture: 2003. The pumps are controlled via a joint control cabinet. Documentation available. On-site inspection is possible.

Wózek wysokiego podnoszenia

Crown BDA-SP3000

Niemcy

nieznany

używany

na żądanie

INNO29113

An electrically driven Crown high-lift order picking machine in need of repair is available. Load capacity: 1250kg, lift height: 7010mm, wheelbase: 1245mm, travel speed: 8.8km/h, machine dimensions X/Y/Z: approx. 1000mm/1600mm/2100mm, weight: approx. 3850kg. The machine has a problem with its traction drive control (cannot be driven) and the batteries need to be charged. Documentation available. On-site inspection is possible.

Komora do suszenia

Matair EF 50 E

Niemcy

2004

używany

na żądanie

INNO29112

Capacity: 50kg, max. operating temperature: 400°C, heating capacity: 3kW, insulation thickness: 80mm, diameter: 710mm, height: 1175mm, weight: 75kg. Documentation available. On-site inspection is possible.

Giętarka trzpieniowa

Transfluid DB2060BK

Niemcy

2017

używany

na żądanie

INNO29111

Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.

Przenośnik ślimakowy

Rh

Niemcy

nieznany

używany

na żądanie

INNO29110

A stainless steel screw conveyor is available. Shaft diameter: 115mm, spiral outer diameter: 350mm, pitch: 180mm, total length: 4200mm. On-site inspection is possible.

Myjka do części

Perkute Clean-o-mat RC 82

Niemcy

2002

używany

na żądanie

INNO29106

Basket diameter: 790mm, usable height: 500mm, loading height: 930mm, max. basket load: 300kg, liquid volume: 150l, pump capacity: 1.5kW, heating capacity: 6kW, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1200mm, weight: approx. 220kg. Documentation available. On-site inspection is possible.

Maszyna do nakładania kleju

H & H (hardo) TH 1300-V60 PU BV

Niemcy

2018

używany

na żądanie

INNO29105

Adhesive: PU (reactive PUR adhesives), material gap height: 0mm-50mm, application speed: 45m/min, working width: 1300mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

Nakładarka kleju

Barberan MEN-H-1600

Niemcy

2017

używany

na żądanie

INNO29103

A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible.