Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [921 - 940 of 2529]

Fork Lift

Mitsubishi FD 40

Germany

1999

used

on request

INNO28319

Fuel: diesel, max. speed: 20km/h, max. load: 4000kg, machine dimensions X/Y/Z: approx. 3150mm/1500mm/2300mm, weight: approx. 6200kg, operating hours: approx. 13533h. The handbrake of the must be adjusted. Documentation available. An on-site inspection is possible.

Stretch Winder

Tosa 015

Germany

1999

used

on request

INNO28318

A Tosa winding machine is available. Machine dimensions X/Y/Z: approx. 2500mm/1500mm/2800mm. The machine produces sparks. An on-site inspection is possible.

Water Jet Cutting Machine

Eas Duojet

Germany

2022

used

on request

INNO28312

An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.

Wheel Blast Machine

Modena CM T10

Germany

2013

used

on request

INNO28311

Effective diameter: 1000mm, effective height: 450mm, max. load: 900kg, connected load: 7.34kW, turbine power: 5.5kW, impeller diameter: 334mm, throwing blades: 6, discharge speed: 30m/s-70m/s. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/3500mm, weight: approx. 2050kg, operating hours: 2559h. Documentation available. On-site inspection is possible.

Crushing Plant

Hosokawa Alpine A 1500 P/45-100 CL

Germany

2000

used

on request

INNO28310

A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible.

Differential-Way Press

Bruderer BDWP-AR14-3200.RK1E3

Germany

1992

used

on request

INNO28309

A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible.

Transport Trolley

Pefra/bauer 4000/RGP-1

Germany

2019

used

on request

INNO28303

Two heavy-duty transport trolleys are available. 1) Pefra 4000, year of construction: 2019, load capacity: 3000kg, permissible driving speed: 10km/h, permissible total weight: 4010kg, tare weight: 1010kg. 2) Bauer RGP-1, year of manufacture: 2017, load capacity: 2000kg, insertion width: 700mm, insertion pocket length: 870mm, front dimension: 1540mm, tare weight: 378kg. Documentation available. On-site inspection is possible.

Stretch Winder

Tbs-pack Profi-FS-400

Germany

unknown

used

on request

INNO28301

Turntable diameter: 1600mm, load capacity: 1650kg, max. winding height: 2000mm, turning speed: 12rpm. Documentation available. On-site inspection is possible.

Fork Lift

Jungheinrich EFG 215/DFG 320s

Germany

2014

used

on request

INNO28300

Two Jungheinrich forklifts are available. 1) Electric forklift truck Jungheinrich EFG 215, year of manufacture: 2008, operating hours: 5416h, lifting height: 4500mm, load capacity: 1500kg. The drive axle is broken on the right. 2) Jungheinrich DFG 320s diesel forklift truck, year of manufacture: 2014, operating hours: 3480h, lift height: 4800mm, load capacity: 1800kg. A fault occurs sporadically and is rectified after a restart. Documentation available. On-site inspection is possible.

CNC Vertical Lathe

Danobat Danumeric TV-200/CSM

Germany

2002

used

on request

INNO28299

A Danobat CNC vertical lathe including accessories is available. Workpiece diameter: 200mm, workpiece turning diameter: 300mm, roller bearing inner diameter: 140mm, spindle inner diameter: 50mm, chuck diameter: 210mm, speed: 4700rpm. Tool positions: 8, feed X/Z: 30m/min. Machine dimensions X/Y/Z: approx. 2700mm/2000mm/3000mm, control: Siemens Sinumerik 810D. Including pick-up function and pallet magazine EWAB. Documentation available. On-site inspection is possible.

Screw Compressor

Kaeser DS170/AS31

Germany

1998

used

on request

INNO28298

Two Kaeser compressors are available. 1) Kaeser DS 170, year of manufacture: 1998, rated power: 90kW, air volume flow: 14m³/min, max. operating pressure: 7.5bar, machine dimensions X/Y/Z: approx. 3000mm/2000mm/2200mm, weight: approx. 2800kg, load hours: 74833h, operating hours: 98982h. 2) Kaeser AS31, year of manufacture: 1998, rated power: 18.5kW, max. operating pressure: 7.5bar, air volume flow: 3.1m³/min, machine dimensions X/Y/Z: approx. 1500mm/900mm/1300mm, weight: approx. 1000kg, operating hours: 18067h. Documentation available. On-site inspection is possible.

CNC Die Sinking Machine

Agie Agietron Integral 3

Germany

1997

used

on request

INNO28292

Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible.

Radial Drilling Machine

G. Breda R 45 1210

Germany

1990

used

on request

INNO28290

Drilling capacity steel/cast iron: 45mm/55mm, spindle mount: Morse taper MK5, throat depth: 1210mm, quill stroke: 310mm, speed: 1250rpm, feed rate: 1.35mm/rev, spindle table distance min./max.: 525mm/1690mm, table dimensions X/Y: 1900mm/1100mm. Machine dimensions X/Y/Z: approx. 3000mm/1100mm/3000mm, weight: approx. 2100kg. Documentation available. On-site inspection is possible.

Granulation Mill

Zerma GSL 180-430/GSL 180-300

Germany

2003

used

on request

INNO28285

Two low-speed Zerma beside-the-press grinders are available. 1) Zerma GSL-180/430, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 430mm, rotor speed: 150rpm, drive power: 4kW, number of rotor knives: 45, number of stator knives: 2, min. sieve hole diameter: 5mm, weight: approx. 250kg. 2) Zerma GSL-180/300, year of manufacture: 2003, rotor diameter: 180mm, rotor width: 300mm, rotor speed: 150rpm, drive power: 4kW, number of rotor blades: 30, number of stator blades: 2, min. screen hole diameter: 5mm, weight: approx. 250kg. Documentation available. On-site inspection is possible. Individual sale possible.

Sachet Packaging Machine

Merz MP-2

Germany

2008

used

on request

INNO28284

Two Merz sachet machines for the pharmaceutical industry are available. 1) Merz Verpackungsmaschinen GmbH MP-2, year of manufacture: 2002, modified: 2008, pouch width range: 15mm-160mm, pouch length range: 15mm-200mm, filling volume range: 0.2ml-250ml, filling capacity: 100 cycles/min. 2) Merz Verpackungsmaschinen GmbH 091, year of manufacture: 1998, modified: 2000. Both packaging machines are duplex-capable. Documentation available. On-site inspection is possible. Individual sale possible.

CNC Profile Machining Center

Emmegi Phantomatic X4

Germany

2011

used

on request

INNO28283

A CNC aluminum profile processing center Emmegi including a corner joining machine Pressta 1800 is available. Axes: 4, travel X/Y/Z: 4300mm/270mm/300mm, speed: 20000rpm, tool positions: 4, angle machining heads: 2, max. magazine saw blade diameter: 180mm, tapping capacity: M8, machine dimensions X/Y: approx. 5000mm/1300mm, weight: approx. 2200kg, spindle hours: 14422h. Documentation available. On-site inspection is possible. Expected to be available from January 2025.

Electric Motor

Abb M3KP 225SMA

Germany

unknown

used

on request

INNO28282

Three identical ABB electric motors are available. Voltage supply: 380V-690V, motor type: three-phase motor, switching frequency: 2kHz, max. overload time: 10s, cooling time: 10min. PTC sensor included. Documentation available. On-site inspection is possible.

Column-Mounted Slewing Crane

Carl Stahl WK 3

Germany

2014

used

on request

INNO28281

Load capacity: 500kg, reach: 2750mm, swivel range: 360°, foundation column weight: approx. 3000kg, tare weight: approx. 3350kg. Documentation available. On-site inspection is possible.

Bottle Filling Machine

Khs Innofill DRS

Germany

2013

used

on request

INNO28279

A KHS bottle filling machine is available. Filling object material: glass, filling points: 168, filling capacity: 22000-65000 bottles/h, sterile filter: 0.2µm, max. oil content: 0.01mg/m³, max. solids content particle diameter: 10µm, min. filling capacity per filling point: 250-300l/h, filler type: pitch circle, pitch circle filler diameter: 5040mm, bottle volume: 0.33l/0.5l, bottle formats: Steini/Long Neck Pils/NRW Pils/Long Neck. Documentation available. On-site inspection is possible.

Top and Bottom Labeler

Herma 652C S

Germany

2021

used

on request

INNO28278

Product features: rectangular and dimensionally stable, labeling capacity: 30 products/min, compressed air connection: 6bar, printing process: Thermal transfer printing, product weight range: 15g-1000g, machine weight: approx. 600kg. Label length range top: 15mm-160mm, label width range top: 30mm-300mm. Label length range bottom: 15mm-120mm, label width range bottom: 30mm-300mm. Product dimensions X/Y/Z on top: 30mm-300mm/50mm-250mm/50mm-150mm. Product dimensions X/Y/Z bottom: 140mm-300mm/50mm-250mm/50mm-200mm. Product dimensions X/Y/Z top and bottom: 140mm-300mm/50mm-250mm/50mm-150mm. Including a two meter long and 150mm wide conveyor belt and 180° Dorner conveyor belt. Documentation available. On-site inspection is possible.