▷ Used materials handling technology from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Materials handling technology

Bulk feeders 4 Chain hoist and lift technology 20 Conveying machinery 13 Conveyor belts 20 Other machinery 11 Pumps 11 Roll conveyors 2

Innovac used-machines

Materials handling technology [1 - 20 of 81]

Vacuum Tube Lifter

J. Schmalz Jumbo Ergo 85-350

Germany

2002

used

on request

INNO32648

Offered is a vacuum tube lifter with pillar-mounted jib crane. Maximum load capacity: 85kg. Weight of the lifting unit: 63.5kg. Equipped with a vacuum lifting unit, ergonomic control unit with handle, vacuum gripper, vacuum supply hose, side channel blower with filter, as well as a pillar-mounted jib crane with jib arm and movable suspension. Inspection possible by arrangement.

Vacuum Lifting Device

Bs Gustav Müller VH 8/500

Germany

unknown

used

on request

INNO32603

Max. lifting capacity: 500kg, rated current: 0.95A, connected load: 0.37kW, weight: 115kg, an on-site inspection is possible.

Electric chain hoist

Demag DKUN 5-400 KV1 F4

Germany

2002

used

on request

INNO32596

A crane with chain hoist is offered. Lifting capacity: 800kg, hook travel: 3m, main hoisting speed: 4m/min, fine hoisting speed: 1m/min. Inspection possible by arrangement.

Vacuum Lifting Device

Fezer 3.21.1.2220

Germany

2017

used

on request

INNO30802

An unused Fezer sheet metal vacuum lifter is available. Load capacity: 1000kg, max. sheet dimensions X/Y: 3000mm/1500mm, weight: approx. 200kg. An on-site inspection is possible.

Chain Hoist / Lifting Equipment

Demag PK

Germany

unknown

used

on request

INNO32485

Five Demag cranes are offered. Load capacity: 125kg-2000kg. Including trolley and controls. Inspection possible by arrangement.

Multi-level conveyor

Lipsia

Germany

2016

used

on request

INNO32477

The system is designed as a multi-level conveying and transfer system. Control: touchscreen control panel with additional operating elements on the side-mounted control cabinet. Equipped with multi-level conveyor system, transparent protective enclosure with access doors and integrated discharge station. Inspection possible by appointment.

Dry Claw Vacuum Pump

Busch MINK MM 1252 AV

Germany

2008

used

on request

INNO32387

There are two identical pumps available, nominal suction capacity: 245m³/h, ultimate pressure: 100hPa, ultimate pressure (continuous operation): 200hPa, rated motor power: 5.5kW, rated motor speed: 3000/min, sound pressure level (ISO 3744), 1m distance, at medium load: 75dB(A), oil fill: 1l, gas inlet: G2, gas outlet: R1, length: 1050mm, width: 515mm, height: 450mm, weight: 240kg.

Lifting and Tilting Device

Steimel

Germany

unknown

used

on request

INNO32312

Control: Siemens SIMATIC PANEL, connected load: 28kW, an on-site inspection is possible.

Gantry Crane

Germany

1960

used

on request

INNO32271

A gantry crane in need of repair is offered. Load capacity: 5000kg (formerly 10000kg), Demag wire rope hoist installed, bearing worn out. An on-site inspection is possible.

Vibratory Bowl Feeder

Rna

Germany

unknown

used

on request

INNO32266

Bowl diameter: 1200mm, variable loading height: 1800mm-2200mm, suitable for shaft lengths up to 400mm. Inspection by appointment is possible.

Crane Beam

Tiger TA-N-S-2,5-3,6

Germany

1994

used

on request

INNO32263

Working width: approx. 3600mm, load capacity: 2500kg. An on-site inspection is possible.

Belt Conveyor

Trapo

Germany

2022

used

on request

INNO32247

Usable width: 500mm, infeed: 1100mm straight, 45° center section: 2500mm, outfeed: 900mm straight, conveying element: smooth plastic belt, cleat spacing: 200mm, cleat height: 50mm, drive drum diameter: 108mm, return roller diameter: 108mm, conveying speed: 0.2m/s, drive: 1 unit, without brake, drive arrangement: left side, construction height H1: 400mm, construction height H2: 2000mm, supports: mobile frame with swivel casters, guards: fully covered from below, from above only the inclined section, side guides: on both sides, length: 4500mm, width: 500mm, height: 1985mm, the belt conveyor is unused and new, with documentation. On-site inspection is possible.

Autonomous Transport Vehicle

Egemin Automation E'gv

Germany

2012

used

on request

INNO32193

Two large and two small autonomous industrial vehicles are available, 1) 2x large clamp-type industrial vehicle, axle distance, front-to-rear: 2255mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3999mm, width: 2674mm, height (mast lowered): 3841mm, weight (without battery): 7,45t. 2) 2x small V-Shape industrial vehicle, axle distance, front-to-rear: 2026,5mm, max. load: 2,5t, max. forward travel speed: 1,5m/s, max. reverse travel speed: 0,3m/s, ground clearance: 30mm, length: 3367mm, width: 1920mm, height (mast lowered): 2295mm, weight (without battery): 2,7t. An on-site inspection is possible.

Telescopic Belt Conveyor

Caljan CB4M 6/12,3-600+DS

Germany

2019

used

on request

INNO32129

Offered for sale is a motorized Caljan telescopic belt conveyor. Retracted base length: 6000mm, telescopic extension: 12300mm, total extended length: approx. 18300mm, belt width: 600mm, max. belt load: 50kg/m, electrical power: 3.87kW, operation via joystick and control buttons directly on the boom. Weight: approx. 4900kg. Documentation available. Inspection possible by arrangement.

Bucket Conveyor

Dudik/vahle/sew RK 2250/ FR 285 III/MKHS

Germany

unknown

used

on request

INNO31848

A Dudik bucket conveyor system with trolley is available. Trolley: Dudik RK2250, Travel drive: Bockwoldt/SEW FR 285 III, Conductor rail: Vahle MKHS, Bucket volume: 2250l. The mechanical drive was renewed in 2013. Documentation available. An on-site inspection is possible. Expected to be available from January 2027.

All-Round Rotary Valve

Dmn Westinghouse AML

Germany

unknown

used

on request

INNO31792

Design: drop through rotary valve, top connection: round flange, drive: SEW gear motor, with pneumatic air purge shaft sealing unit, filter regulator, pressure gauge, and hose connections, suitable for plastics, food products, pet food, animal feed, pharmaceuticals, infant formula, chemicals, biomass, aquaculture, dairy products, cosmetics, paints and coatings, minerals, recycling, batteries, and tires. Inspection on site is possible. The machine is not under power.

Powder Screw Conveyor

Hecht Anlagenbau

Germany

unknown

used

on request

INNO31785

Conveyor length: 3000 mm, conveyor diameter: 250 mm, on-site inspection is possible, not energized.

Autonomous Transport Vehicle

Gebhardt 810.11

Germany

2023

used

on request

INNO31549

Three identical transport vehicles available, year of manufacture: 2x 2021, 1x 2023. An on-site inspection is possible.

Loading Chute

Moduflex N300 TH Y1/5

Germany

unknown

used

on request

INNO31475

There are 15 identical loading systems available. Product-contact parts made of stainless steel 1.4301, outlet diameter: 400mm, nominal diameter: DN 300, extended length: 5237mm, retracted length: 1252mm, telescopic length (stroke): 2885mm, max. loading capacity: approx. 50t/h, connected load: 0.55kW, weight: 245kg. An on-site inspection is possible.

Turntable

Stöber

Germany

unknown

used

on request

INNO31473

Two identical turntables are available, the manufacturer and year of manufacture are unknown. They have undergone regular electrical inspections, fully functional, no documentation is available. The year of manufacture is estimated to be 2010. An on-site inspection is possible.