▷ Used printing machines from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Printing machines

Book binding machines 5 Digital Print 9 Elbow machines 1 Flexographic printing press 7 Gravure printing press 2 Inserter 4 Label Systems 7 Offset printing press 3 Other machinery 18 Pad printing machines 3 Post press machines 5 Pre-press 3 Screen printing machine 14

Innovac used-machines

Printing machines [1 - 20 of 81]

Large Format Printer

Durst Rho 512R

Germany

2013

used

on request

INNO29569

A 12-picoliter roll-to-roll UV inkjet printer Durst with Variodrop technology is available. Print width: 5000mm, max. material thickness: 2mm, max. material width: 5200mm, max. print speed: 350m²/h, resolution: 900dpi, nozzles: over 30000, max. roll weight: approx. 270kg. Machine dimensions X/Y/Z: approx. 8500mm/2200mm/2100mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible.

Screen Printing Machine

Thieme 520

Germany

1992

used

on request

INNO29544

Printing dimensions X/Y: 750mm/1050mm, screen frame X/Y: 1200mm/1400mm, vacuum field dimensions X/Y: 1100mm/800mm, table dimensions X/Y: 1250mm/1000mm, squeegee speed: 1.25m/s, printing capacity: 500 cycles/h, max. substrate height: 40mm, max. frame height: 50mm. Machine dimensions X/Y/Z: 1800mm/1700mm/1350mm, weight: approx. 700kg. On-site inspection is possible.

Screen Printing Machine

Thieme 1010 S

Germany

2011

used

on request

INNO29543

A semi-automatic Thieme screen printing machine is available. Printing dimensions X/Y: 550mm/750mm, max. sheet dimensions X/Y: 580mm/780mm, screen frame dimensions X/Y: 1000mm/1100mm, table dimensions X/Y: 800mm/1000mm, max. material thickness: 50mm, fine adjustment: +/-5mm, squeegee speed: 1.4m/s, cycle output: approx. 1350 cycles/h. Machine dimensions X/Y: approx. 2250mm/1750mm, weight: approx. 1200kg, control: Siemens PLC. Documentation available. On-site inspection is possible.

Sheetfed Offset Press

Man Roland R 709 3B LTT UV

Germany

2006

used

on request

INNO29493

Equipment: 8DLTTD + ColdFoil, printing units: 9, coating unit: 1, process: UV offset. Printing capacity: 12000 sheets/h, min. sheet format X/Y: 350mm/500mm, max. sheet format: 740mm/1040mm, max. print format: 710mm/1026mm, material thickness range: 80g-600g/m², gripper margin: 11mm, pile height feeder/delivery: 1400mm/1500mm. Counter reading: approx. 257 million, operating hours: 92553h. Documentation available. On-site inspection is possible.

Screen Printing Machine

Werner Kammann 4, 15, 22

Germany

1982

used

on request

INNO29488

Inks: 6, UV dryer: 4, disk diameter: 120mm, cycle time: 75 cycles/min, print length: 315mm, print speed: 4200 prints/h. On-site inspection is possible.

UV-LED Inkjet Printer

Agfa JETi Tauro H2500 LED

Germany

2018

used

on request

INNO29458

An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible.

UV-LED Inkjet Printer

Agfa JETi Tauro H2500 LED

Germany

2017

used

on request

INNO29457

An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible.

Cross-Layer

Autefa CL 2000

Germany

1992

used

on request

INNO29453

A dismantled Autefa compensating stacker is available. Working width: 3000mm, working speed: 60m/min. On-site inspection is possible.

Plotter

Lasercomb FSP 1613

Germany

unknown

used

on request

INNO29430

Working range X/Y: 1600mm/1300mm, max. material thickness: 7mm, machine dimensions X/Y/Z: approx. 2300mm/2250mm/850mm, weight: approx. 650kg. The control board of the head has a faulty circuit and is defective. Documentation available. On-site inspection is possible.

Binding Machine

Horizon Perfect Binder BQ-270

Germany

2006

used

on request

INNO29410

A Horizon binder is available. Book block thickness range: 1mm-50mm, min. book format: 135mm/105mm, max. book format: 320mm/320mm, min. cover format: 135mm/230mm, max. cover format: 320mm/660mm, paper thickness range: 80g-300g/m², max. cover stack height: 70mm, trimming depth: 0mm-3mm, output: 500 cycles/h. Machine dimensions X/Y/Z: approx. 2300mm/900mm/1250mm, weight: approx. 900kg, counter reading: 358000. An on-site inspection is possible.

Screen Printing Line

Tic SFM-800E

Germany

unknown

used

on request

INNO29403

A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible.

Gravure Printing and Dip Roller System

Chadwick (p+s Tapeten) Kombianlage

Germany

2016

used

on request

INNO29319

A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible.

Continuous Inkjet Printer

Domino A320i

Germany

2013

used

on request

INNO29222

Printing speed: 325m/min, machine dimensions X/Y/Z: 450mm/360mm/530mm, weight: approx. 25kg, operating hours: 4143h. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

Screen Printing Machine

Ser.tec Cabina S / Apply Eco

Germany

2014

used

on request

INNO29175

A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.

Saddle Stitcher

Müller Martini SaHe MM-Tempo E220

Germany

2015

used

on request

INNO29171

Saddle stitcher Müller Martini without compensating stacker is available. Production speed: 22000 cycles/h, reliable production: approx. 400000 newspapers/week, min. format range X/Y: 90mm/115mm, max. format range X/Y: 340mm/280mm, max. product thickness: 12mm, chain pitch: 15 inch, max. feeder: 40 stations. Total system dimensions X/Y: approx. 12000mm/7400mm, weight: approx. 4000kg, control: MMAP. Including central lubrication, Semko sheet control and Asir 3 system. Documentation available. On-site inspection is possible.

3D Printer

Ultimaker S5

Germany

2018

used

on request

INNO29140

A total of 10 (ten) Ultimaker 3D printers including material stations are available. Printing technology: Fused Deposition Modeling (FDM), extruder: dual extrusion with automatic nozzle lift system and exchangeable print cores (AA/BB), nozzle diameter: 0.25mm/0.4mm/0.8mm, build space dimensions X/Y/Z: 330mm/240mm/300mm. Layer resolution: 0.25mm nozzle: 60µm-150µm, 0.4mm nozzle: 20µm-200µm, 0.8mm nozzle: 20µm-600µm, filament diameter: 2.85mm, print bed temperature range: 20°C-140°C. Materials: PLA, Tough PLA, Nylon, ABS, CPE, CPE+, PC, TPU 95A, PP, PVA, Breakaway and other third-party materials. Documentation available. On-site inspection is possible. Only package sale possible.

Remaining Stock

Brehmer/guk/l&m ST/FA/STV 1200

Germany

2018

used

on request

INNO29136

Various machines from a print shop are available. 1) Saddle stitcher Brehmer ST 300, year of manufacture: 1999, with 6 stations, UFA and trimmer. Including extensive spare parts. 2) GUK FA 36-4 buckle plate folder, year of manufacture: 1998, with SAF. Including extensive spare parts. 3) Buckle plate folding machine GUK FA 52/4-4K, year of manufacture: 1988, with 4-pocket cross-fold unit. Including extensive spare parts. 4) Universal eyelet stitching head Hohner 52/8 S, factory overhauled. 5) Theisen & Bonitz TB-Sprint 325 VP gathering machine, year of manufacture: 1991, with 25 stations. 6) Ludden & Mennekes STV 1200 compaction system, year of manufacture: 2018. 7) Nagel Multinak S booklet and block stitching machine. 8) Affeldt SA 12 film sealing machine, year of manufacture: 1994, including 2 pallets of film. Control defective. 9) RIMA RS-10S compensating stacker with delivery belt. 10) Strapex STF automatic package strapping machine, year of manufacture: 2002. 11) Cyclop GL215 pallet film wrapper, semi-automatic with turntable. 12) Dürselen PB 01 paper drilling machine, year of manufacture: 1993, with 4 spindles. 13) Grafotec Lega 30/55 press stack delivery, year of manufacture: 1991. 14) RIMA System RS 220 corner deflector, suitable for cannibalization, part of the control system missing. 15) IBICO EPK-21 plastic spiral binding machine. 16) Habasit PT-103/8 belt hot-pressing device, new and in original packaging. 17) Regu Binder pleating belt machine. Including pleating belt. 18) Self-made roll unwinder, solid construction. 19) Perforating machine from E. Bickel. On-site inspection is possible. Only a package sale is possible.

Screen Printing Machine

Kammann K15R (4.15.09)

Germany

1998

used

on request

INNO29086

A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.

Plotter

Rowe RCS 6000/Rowefold

Germany

2007

used

on request

INNO29040

An A0 roll plotter Rowe including integrated folding machine Rowefold with longitudinal and cross folding, third and fourth automatic roll as well as PS level 2, 3 and PDF is available. 1) Roll plotter, year of manufacture: 2007, print resolution X/Y: 1200dpi/600dpi, print speed: 6m/min, scan resolution X/Y: 1200dpi/1200dpi, max. scan width: 914mm/DIN A0, scan speed b/w/color: 9m/4m/min, max. vellum thickness: 110g/m². Material types: Plain, transparent, recycled, fluorescent, colored paper and vellum. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1000mm, weight: approx. 300kg, meter/square meter count: 62260m/42214m². 2) Integrated lengthwise and crosswise folding machine, folding speed: 18m/min, max. folding width: 960mm, max. paper length lengthwise/crosswise: 6000mm/2500mm, paper weight range: 60g-110g/m². Documentation available. On-site inspection is possible.

Flexo Printing Machine

Officine Padane Zodiac

Germany

unknown

used

on request

INNO29035

A 4-color Padane single-cylinder counter-printing machine with 4 inking units in pressing operation is available. Printing units: 4, repeat range: 280mm-650mm, max. printing width: 780mm, max. foil width: 810mm, cliché thickness: 2.84mm, printing process: single-sided, max. roll diameter: 600mm, number of cliché cylinders at 270mm: 2, number of cliché cylinders 280mm-650mm: 4, machine dimensions X/Y/Z: approx. 7500mm/2600mm/3000mm. Documentation available. On-site inspection is possible. Expected to be available from June 2025.