Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [961 - 980 of 2789]

CNC Vertical Machining Center

Dmg DMC 1035 V eco

Germany

2009

used

on request

INNO30171

Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible.

CNC Lathe

Dmg NEF 600

Germany

2011

used

on request

INNO30170

Swing diameter over bed/cross slide: 600mm/410mm, turning length: 1190mm, travel X/Z: 320mm/1250mm, speed: 3000rpm, spindle bore: 75mm, torque: 785Nm, tailstock taper: MK5, tool stations: 8, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5500kg, control: Siemens Sinumerik 840D powerline, operating hours: 22407h. Including conveyor and chip breaker. Documentation available. An on-site inspection is possible.

Filter Centrifuge

Alfa Naval IFB 303X-73

Germany

2001

used

on request

INNO30169

An Alfa Naval disc stack centrifuge module for separating foreign oil from water-based coolants is available. Speed: 7500rpm, throughput with water-based coolant: approx. 480l/h, max. medium temperature: 70°C. Machine dimensions X/Y/Z: approx. 650mm/550mm/1200mm, weight: approx. 60kg. An on-site inspection is possible.

Injection Moulding Machine

Arburg/demag/engel 270M/420C/370C/320M/viva/ES

Germany

2003

used

on request

INNO30168

Eight Arburg injection molding machines, one Engel injection molding machine, and one Demag injection molding machine are available. 1) Arburg 270M 350-90, year of manufacture: 1996, operating hours: approx. 110000h. 2) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 108000h. 3) Arburg 270M 350-90, year of manufacture: 1992, operating hours: approx. 178000h. 4) Arburg 420C 1000-250, year of manufacture: 1995, operating hours: approx. 96000h. 5) Arburg 370C 800-225, year of manufacture: 1992, operating hours: approx. 156000h. 6) Arburg 320M 500-90, year of manufacture: 1991, operating hours: approx. 94000h. 7) Arburg 270M 350-90 U, year of manufacture: 1998, operating hours: approx. 83000h. 8) Arburg 630S 2500-675, year of manufacture: 2003, operating hours: approx. 93000h. 9) Demag Viva 100-400, year of manufacture: 1999, operating hours: approx. 116000h. 10) Engel ES 500/100 HLS, year of manufacture: 1998, operating hours: approx. 103000h. On-site inspection possible. Sale of individual machines possible.

Injection Moulding Machine

Arburg Allrounder 375 V 500-100

Germany

2016

used

on request

INNO30167

An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible.

Crate Washing Machine

Klotzki Spiral 2000x2000

Germany

2011

used

on request

INNO30166

A Klotzki spiral crate washing machine for open plastic beverage crates is available. Crate dimensions X/Y in longitudinal flow: 400mm/300mm, crate dimensions X/Y: 200mm/300mm, crate height range: 270mm-300mm, conveying direction: cross flow, throughput capacity: 1500-2000crates/h, treatment section: approx. 34m, number of units: 48pieces, material: stainless steel, treatment time at 1700 and 2400crates/h: approx. 91s/65s, crate infeed height: 1100mm, crate outfeed height: 4100mm. Machine dimensions X/Y/Z: approx. 3000mm/2000mm/5000mm, weight: approx. 1500kg, control system: Logo. Without platform. The crate indexing and spraying units may need repair. Documentation available. A visit on site is possible.

Pouch Manufacturing Plant

Roll-o-matic Compact 860l

Germany

2012

used

on request

INNO30165

A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.

Pallet Wrapping Machine

Huras Airplast WP

Germany

unknown

used

on request

INNO30164

Turntable diameter: 1500mm, max. pallet height: 2400mm, max. pallet weight: 2000kg, rotation speed: 8rpm, film carriage pre-stretch: 200%. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2650mm, weight: approx. 1200kg. An on-site inspection is possible.

Convection Oven

Nabertherm N500/65HA

Germany

2015

used

on request

INNO30162

A Nabertherm circulating air chamber furnace is available. Connected load: 30kW, max. temperature: 650°C, volume: 500l, heating-up time: approx. 60min, internal dimensions X/Y/Z: 750mm/1000mm/750mm. Machine dimensions: approx. 1300mm/1900mm/1850mm, weight: approx. 750kg. Documentation available. On-site inspection possible.

Center Lathe

Nardini ND22AE/1500

Germany

1987

used

on request

INNO30157

A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible.

CNC Cycle Lathe

Boehringer VDF DUS 560

Germany

1993

used

on request

INNO30156

Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible.

Punch Press

Ebu HK 80 FR

Germany

2016

used

on request

INNO30150

Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible.

Extruder Line

Battenfeld/gloenco PS-Schaum

Germany

1998

used

on request

INNO30149

A complete PS foam extrusion line (capacity: 350kg-400kg/h) is available. 1) 7x dosing units K-Tron Switzerland and Coperion, main components: 3, side components: 4, capacity: 350kg-400kg/h. 2) Primary extruder Battenfeld, year of manufacture: 1998, screw diameter: 120mm, screen changer: Gneuss, double piston pump: LEWA. Including gas injection. 3) Secondary extruder, screw diameter: 150mm/33D. Including unused old die and a coextruder Kühne with 50mm screw diameter. 4) Oil-heated Sunwell round die. 5) Calibration unit Dorn, knives: 2, films: 2, film width: 1080mm. 6) Take-off unit Gloenco Double S Haul-Off. 7) PS film winder, positions: 4, simultaneously operated positions: 2, winding speed range: 10m-30m/min, roll weight range: 150kg-300kg, roll length range: 500mm-800mm. Including discharge with ionization. Documentation available. An on-site inspection is possible. This line is sold ONLY to customers outside Europe.

CNC Lathe

Emag VL 2

Germany

2018

used

on request

INNO30148

A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 15.7kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, control: Fanuc 32-iB, operating hours: approx. 28487h, spindle hours: approx. 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck and probe. Documentation available. An on-site inspection is possible.

CNC Machining Center

Micromill Challenger MM430

Germany

2012

used

on request

INNO30147

Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible.

Double Mitre Saw

Mange Jixie MG-841

Germany

2012

used

on request

INNO30146

A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.

Robot

Franka Robotics Panda

Germany

2018

used

on request

INNO30145

Three identical Franka Robotics robots are available. Axes: 7, max. payload: 3kg, max. reach: 855mm, repeatability: +/-0.1mm, max. acceleration: 15m/s², weight: approx. 25kg. Documentation available. An on-site inspection is possible.

Lathe

Weiler MDU 260

Germany

1977

used

on request

INNO30143

A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible.

Network Analyzer

Hp 8753D/3325A

Germany

unknown

used

on request

INNO30142

Several vector network analyzers and one synthesizer-based HP function generator are available. 1) 3x HP 8753D, frequency range: 30kHz-6GHz, option: 006, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 2) 6x HP 8753D, frequency range: 30kHz-3GHz, option: Standard, max. dynamic range: 110dB, frequency resolution: 1Hz, output power min./max.: -85dBm/10dBm, power resolution: 0.05dB, input impedance: 50Ohm, measurement types: S-parameters/reflection/transmission/phase/magnitude/group delay, max. sweep speed: 200µs/point. Machine dimensions X/Y/Z: approx. 450mm/200mm/600mm, weight: approx. 25kg. 3) HP 3325A, max. frequency range: 21MHz, resolution: 1µHz, max. amplitude: 10V. Machine dimensions X/Y/Z: approx. 450mm/150mm/450mm, weight: approx. 15kg. All devices were calibrated in 2019. Documentation available. On-site inspection possible.

Filling and Capping Line

Alwid Superior 48HV/10PP

Germany

2019

used

on request

INNO30141

A fully automatic high-vacuum rotary filling and capping machine Alwid for spirits is available. Filling stations: 48, filling valve diameter: 14mm, capper type: Alwid Favorit-PP, capping heads: 10, closure types: PP28/PP28x44/PP31.5 deep, min. working height: 1150mm, bottle volume: 0.7l, bottle types: rectangular glass bottles/vodka bottles/long-neck bottles, filling capacity according to documentation: 18000bph, effective filling capacity: approx. 12000bph, weight: approx. 6500kg, operating hours: approx. 14000h. Without sorting unit and chutes. The vacuum pump probably needs descaling. The deviation between the documented and actual filling capacity per hour is due to foam formation during the filling process, which significantly reduces performance. Documentation available. An on-site inspection is possible.