Used machines Germany - Innovac GmbH

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Latest Offers [981 - 1000 of 2591]

Cylindrical Grinding and Polishing Machine

Loeser RP+S 374/2

Germany

2016

used

on request

INNO28612

Two Loeser centerless round polishing machines are available. Workpiece diameter range: 10mm-30mm, workpiece length range: 100mm-1000mm, stations: 2, working direction: left-right, magazine with input and output table: 1000mm/1000mm. Including magazines and input and output table. Documentation available. On-site inspection is possible. Expected to be available from April 2025.

Center Lathe

Wmw DLZ 450x1600

Germany

1965

used

on request

INNO28608

A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993.

CNC Universal Milling Machine

Maho MH 600C

Germany

unknown

used

on request

INNO28602

Travel X/Y/Z: 600mm/400mm/500mm, speed: 5000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 3900mm/2900mm/2000mm, weight: approx. 3600kg, control: Maho CNC 432, operating hours: 47333h. On-site inspection is possible.

Soldering Cabin

Pötter PK-IAT-L 1400

Germany

2011

used

on request

INNO28601

A soldering booth including extraction is available. Documentation available. On-site inspection is possible.

Rope Winches

Konecranes HoistMaster 2i

Germany

unknown

used

on request

INNO28600

Two identical Konecranes wire rope hoists are available. Including frequency converter and braking resistor. Documentation available. On-site inspection is possible.

CNC Table Drilling Machine

Tos WHN 10 TNC

Germany

1989

used

on request

INNO28598

Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible.

CNC Drilling and Milling Machine

Busch FB 1-150

Germany

1992

used

on request

INNO28595

Travel X/Y/Z: 1000mm/150mm/200mm, table dimensions X/Y: 1300mm/300mm, speed: 6000rpm, tool positions: 8, control: Siemens Sinumerik 810, weight: approx. 3200kg. Coolant system included. Documentation available. On-site inspection is possible.

Single Column Press

Neff T 6.3/EP10

Germany

1989

used

on request

INNO28594

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

Drilling Machine

Alzmetall Abomat 30

Germany

1982

used

on request

INNO28592

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

Band Saw

Mep Shark 281

Germany

unknown

used

on request

INNO28590

Cutting capacity 0°: round material: 250mm, square material: 230mm/230mm, flat material: 280mm/200mm. Cutting capacity 45°: round material: 190mm, square material: 180mm/180mm, flat material: 180mm/180mm. Cutting capacity 60°: round material: 120mm, square material: 110mm/110mm, flat material: 110mm/110mm. Sawing speed: 72m/min, saw blade dimensions X/Y/Z: 2950mm/27mm/0.9mm, weight: approx. 370kg. On-site inspection is possible.

Welding Fume Extraction

Teka Filtercube 4H

Germany

2014

used

on request

INNO28589

Motor power: 7.5kW, air volume flow: 8000m³/h, negative pressure: 4600Pa, filter area: 100m², filter cartridges: 4, machine dimensions X/Y/Z: approx. 800mm/900mm/3200mm, weight: approx. 400kg. Documentation available. On-site inspection is possible.

CNC Laser Cutting Machine

Bystronic ByStar Fiber 10kW

Germany

2017

used

on request

INNO28587

Laser power: 10kW (10000W), working range: 3000mm/1500mm, max. material thickness: mild steel: 25mm, stainless steel: 30mm, aluminum: 30mm, copper: 12mm, brass: 15mm. Positioning speed: 120m/min, positioning accuracy: +/-0.05mm, max. workpiece weight: 1100kg. Machine dimensions X/Y/Z: approx. 9500mm/3500mm/3500mm, suction dimensions X/Y/Z: approx. 1500mm/1500mm/4000mm, machine weight: approx. 12000kg, operating hours: approx. 17000h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

Stirring and Whipping Machine

Lips

Germany

unknown

used

on request

INNO27513

A Lips mixer, beater and roller grater is available. Mixer: bowl volume: 40 l, dough hook, mixing blades and whisk. Whipping unit: 2x 4-finger whisks, dough hooks, 5x whisk blades, 6x whisks and 9x bowl (volume: 10l-35l). Roller unit: hopper, round bowl, square stainless steel bowl, scraper and gripper guard. Machine dimensions X/Y/Z: approx. 2350mm/900mm/1350mm, weight: approx. 900kg. Including various accessories. The wood hopper of the roller must be replaced. If required, the gas burners must be retrofitted.

Hardness Testing Machine

Zwick 3202

Germany

1969

used

on request

INNO27522

Lens magnification: 20x, aperture: 0.35, total magnification: 200x, measuring accuracy: +/-4kp/mm², average hardness value D: 144kp/mm², average thickness of reference plate: 5.9mm, max. test height: 300mm, throat depth: 135mm, machine dimensions X/Y/Z: approx. 450mm/450mm/600mm, weight: approx. 60kg. Including various lenses, clamping device for round specimens, hardness comparison plates and more. Documentation available. On-site inspection is possible.

Moulder

Bongard Majur Manu

Germany

unknown

used

on request

INNO27512

Dough weight min./max.: 80g/1000g, max. output: 1500 pieces/h, motor power: 0.55kW, loading height: 1360mm, output height: 850mm. Machine dimensions X/Y/Z: approx. 1010mm/850mm/690mm, weight: approx. 132kg. Overhauled: revised, new belts, new felt in infeed hopper and outfeed belt. Documentation available. On-site inspection is possible.

Drill Grinding Machine

Haarmann HSP 50

Germany

1978

used

on request

INNO27511

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

Planetary Mixer

Artofex RG 10

Germany

unknown

used

on request

INNO27506

Two identical Artofex planetary mixers with a total of 7 mixing bowls are available. Stirring capacity: 100l, container volume: 100l/120l, machine dimensions X/Y/Z: approx. 800mm/1550mm/2250mm, weight: approx. 1350kg. Including 6x bowl trolleys, mass whisk, whisk, agitator blades used and new. Machine overhaul: electrics in 2021, mechanics in 2024 and oil change. On-site inspection is possible.

Band Saw

Jaespa Concept 260/630S

Germany

2010

used

on request

INNO28582

Motor power: 4kW, cutting speed: 15m-90m/min, saw blade dimensions X/Y/Z: 5150mm/13mm/0.9mm, saw blade type: M42/4ZpZ, material support height: 720mm, angle: +/-30°, machine dimensions X/Y/Z: approx. 2850mm/1400mm/1850mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible.

Dispensing Cell

Camelot Systems CAM/ALOT System 5000

Germany

1998

used

on request

INNO28581

A Cookson dispensing machine for the SMT industry is available. Dispensing capacity 50 mil pitch solder paste: 25000 dots/h, dispensing capacity 3mm pitch SMD adhesive: 22000 dots/h, dispensing range X/Y: 450mm/450mm, travel X/Y/Z: 483mm/483mm/55.8mm, feed X/Y: 406mm/s, SMEMA compatibility: available. Including spare parts, seals, hoses etc. Documentation available. On-site inspection is possible.

CNC Travelling Column Maching Center

Soraluce FL 6000

Germany

2011

used

on request

INNO28578

Travel X/Y/Z: 5500mm/1200mm/1800mm, milling head indexing: 2.5°, drive power: 28kW, spindle speed: 4000rpm, feed X/Y/Z: 25m/min, table diameter: 1600mm, table speed: 250rpm, max. workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Workpiece weight: 8000kg, panel field dimensions X/Y/Z: 6000mm/2000mm/300mm, machine weight: approx. 16500kg, control: Heidenhain iTNC 530. Including internal coolant supply and chip conveyor. Documentation available. On-site inspection is possible.