▷ Used construction machinery from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Construction machinery

Building material fabrication 3 Concrete technique and plaster treatment 6 Dozers 2 Drill systems 3 Excavators 3 Loader 2 Other machinery 2 Trailers 1 Work platforms 2

Innovac used-machines

Construction machinery [1 - 20 of 24]

Autoclave

Scholz

Germany

2008

used

on request

INNO29050

A total of four Scholz autoclaves are available for the preparation of sand-lime bricks or concrete. Volume: 60m³/60000l, temperature range: 0°C-203°C, operating pressure: 16bar, test pressure: 26bar. Documentation available. On-site inspection is possible.

Wheel Loader

Zeppelin ZL 6B

Germany

1994

used

on request

INNO28933

Tires: 335/80 R20, bucket volume: 0.7m³, steering: articulated steering, tare weight: approx. 5000kg, operating hours: 12935h. Documentation available. On-site inspection is possible.

Heavy-duty Trailer

Kampe SLA VRA 54265

Germany

2022

used

on request

INNO28528

Payload: 20000kg, speed: 6km/h, loading area height: approx. 2560mm, total height: approx. 3330mm, tare weight: 3325kg. Includes a matching roof. The roof is connected at 4 points with 4 screws and can be removed as required. Documentation available. On-site inspection is possible.

Concrete Mixer

Pemat PMPR 750

Germany

2000

used

on request

INNO28366

A Pemat pan mixer for concrete is available. Volume: 750l, max. filling weight: 1200kg, hardened concrete output per batch: 500l, grain size range: 0-65mm, mixing trough diameter: 1900mm, mixing trough height: 700mm, drive power: 30kW, weight: approx. 3000kg. On-site inspection is possible.

Sanitary Container

Containex 20ft S

Germany

1994

used

on request

INNO28354

A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible.

Scissor Platform

Germany

2002

used

on request

INNO28345

A scissor lift from an unknown manufacturer is available. Lifting height: 8140mm, working height: 10000mm, machine dimensions X/Y/Z: approx. 2350mm/1200mm/2300mm, weight: approx. 2250kg. The battery of the machine must be deep-charged. Documentation available. On-site inspection is possible.

Radial Scraper

Elba RSA 50 D

Germany

1998

used

on request

INNO28342

Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible.

Crawler Excavator

Zeppelin 325 LN

Germany

1993

used

on request

INNO28059

Power: 126kW, backhoe bucket capacity: 1.7m³, reach: 9760mm, track width: 600mm, breakout force: 236kN, displacement: 7200cm³, undercarriage: NLC, boom: monoblock, digging depth: 6570mm, torque: 1800rpm. Transport dimensions X/Y/Z: approx. 10350mm/3000mm/3300mm, weight: approx. 25500kg, operating hours: 20159h. Documentation available. On-site inspection is possible.

Wheel Loader

Doosan DL 450-5

Germany

2017

used

on request

INNO28058

Power: 257kW, displacement: 12700cm³, torque: 1400rpm, bucket capacity: 4.5m³, max. dumping height: 3115mm, backhoe capacity: 4.5m³, outside turning radius: 7205mm, engine type: DC 13, tires: 26.5 R25 (L3), fuel: diesel. Transport dimensions X/Y/Z: approx. 9350mm/3300mm/3600mm, machine weight: approx. 26000kg, operating hours: 6228h. Documentation available. On-site inspection is possible.

Concrete Mixer

Mercedes Arocs MB 3240B

Germany

2018

used

on request

INNO28057

Power: 290kW, Fuel: Diesel, TÜV: until 07.2025, Payload: 18775kg, Wheelbase: 4250mm, Displacement: 10700cm³, Rated torque: 1900rpm. Machine dimensions X/Y/Z: approx. 6200mm/2500mm/3300mm, weight: approx. 32000kg, mileage: 49873km. Documentation available. On-site inspection is possible.

Crawler Excavator

Hitachi ZX250LC

Germany

2008

used

on request

INNO28056

Engine type: ZX250LCN-3, power: 132kW, fuel: diesel, max. digging depth: 6960mm, cubic capacity: 5193cm³, backhoe capacity: 1.65m³, track width: 600mm, undercarriage: NLC, boom: monoblock. Transport dimensions X/Y/Z: approx. 10300mm/3050mm/3000mm, weight: approx. 25000kg, operating hours: 16645, documentation available. On-site inspection is possible.

Crawler Excavator

Caterpillar 322 CLN

Germany

2001

used

on request

INNO28055

Engine type: CAT 322 BLN, power: 114kW, fuel: diesel, max. digging depth: 2500mm, cubic capacity: 7200cm³, backhoe capacity: 1.4m³, track width: 600mm, backhoe width: 1350mm, max. reach: 9435mm, speed at max. torque: 1800rpm, boom: monobloc. Transport dimensions X/Y/Z: approx. 10500mm/3000mm/3200mm, weight: approx. 25000kg, operating hours: 16883h. Documentation available. On-site inspection possible.

Bulldozer

Liebherr PR 722 BL

Germany

1995

used

on request

INNO27985

A Liebherr PR 722 B bulldozer (crawler) is available. Engine type: Liebherr D 924 T-E, engine power: 97kW(132hp), displacement: 6.7l(6700cm³), max. speed: 11km/h, track width: 610mm, height above cab: 3100mm, transport dimensions X/Y/Z: approx. 3890mm/2410mm/3100mm, weight: approx. 15400kg, operating hours: 11884h. The right drive of the machine is leaking. Documentation available. On-site inspection is possible.

Stirrup Bending Machine

Mep Macchine Elettroniche Piegatrici System N

Germany

1997

used

on request

INNO27902

Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible.

Rack and Pinion Lift

Steinweg Böcker 500 Z

Germany

2002

used

on request

INNO27828

Conveying speed: 30m/min, load capacity lift: 500kg, max. total mass of car and payload: 1.6t, control: Steinweg LIFTOMATIK, connected load: 3.7kW. Machine dimensions X/Y/Z: approx. 1600mm/1400mm/1800mm, weight: approx. 750kg. The machines safety brake must be replaced due to UVV. Documentation available. On-site inspection is possible.

Cement Bag Filling System

Rotopacker Zipper 50/400

Germany

1993

used

on request

INNO27804

An automatic valve bag filling system for cement bags Rotopacker is available. Packaging capacity: 2400 bags/h, number of filling stations: 8, filling station type: spouts, cylinder: Festo pneumatic cylinder, cylinder stroke: 150mm. Documentation available. On-site inspection is possible.

Paving Block Production Line

Omag

Germany

1990

used

on request

INNO27435

A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible.

Drilling Machine

Hausherr HBM 120 S

Germany

2006

used

on request

INNO27055

Power: 403kW, max. drilling depth: 108m, max. drilling diameter: 311mm, chassis: crawler chassis, dimensions X/Y/Z: approx. 10500mm/2500mm/3800, weight: approx. 31000kg, operating hours: 12300h. Including 36m drill pipe on the boom (without drill bit) and new 72m drill pipe as replacement. Compressor must be checked. On-site inspection is possible.

Scissor Lifts

Skyjack SJ 3219

Germany

2013

used

on request

INNO26967

Load capacity: 227kg, max. tilt angle: 3.5°, max. wind speed: 9.4m/s, platform height: 5800mm, operating pressure: 207bar, max. tire load: 570kg, weight: 1312kg. The battery is defective and the machine cannot be moved for long. Replacing the battery will probably solve the problem. Documentation available.

Hydraulic Crawler Drilling Rig

Klemm KR 802

Germany

2001

used

on request

INNO26876

Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available.