▷ Used process equipment and chemical plants from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Process equipment and Chemical plants

Blowers 4 Centrifuges 7 Chamber filter-press 1 Compressors 21 Decanter 1 Filter systems 39 Mills 8 Mixing machines 40 Other machinery and plants 16 Paper production 1 Presses 1 Pumps 9 Storage containers and tanks 16 Water treatment equipment 11

Innovac used-machines

Process equipment and Chemical plants [1 - 20 of 175]

Stainless Steel Tanks

Wang TDI-Behälter

Germany

2024

used

on request

INNO32661

3 horizontal, fully insulated stainless steel storage tanks are offered for sale. Nominal volume: 30000liters per tank. Gross volume: 31190liters per tank. Permissible operating pressure: -0.1 to +0.6bar. Permissible operating temperature: -10 to +100°C. Material: stainless steel 1.4571. Outside diameter: 2900mm. Length over heads: 5170mm. Equipped with complete insulation, walkable steel structure providing access to the connections and nozzles, and a support frame. Total weight: approx. 5100kg per tank. Handed over fully flushed and cleaned. Inspection possible by arrangement.

Ultrapure Water System

Millipore Milli-Q Academic

Germany

unknown

used

on request

INNO32622

Offered for sale is a laboratory ultrapure water system with digital controls. Control system: Digital control panel with LCD display and function keys. Equipped with a handheld water dispenser, flexible coiled hose and side-mounted filter cartridge. Inspection possible by arrangement.

Ultrapure Water System

Thermo Scientific GenPure Standard with xCAD

Germany

2012

used

on request

INNO32620

Offered for sale is a laboratory ultrapure water system with an external filter unit. Power consumption: 80W. Operating voltage: 24V. Equipped with an external filter housing, pressure gauge and hoses. Inspection possible by arrangement.

Filtration System

Moldow 061MHL-336EX

Germany

2017

used

on request

INNO32610

Airflow: 27,000m³/h, filter area: 215m², filter load: 126m³/m²/h, number of filter bags: 204, number of filter sections with 36 bags: 5, number of filter sections with 24 bags: 1, number of air injection sections: 1, chain speed: 3.9m/min, drive shaft speed: 5rpm, max. material throughput: 20m³/h, regeneration carriage travel speed: 6m/min, chain conveyor motor power: 0.55kW, chain speed: 3.9m/min, max. material throughput: 20m³/h, regeneration fan motor power: 4kW, regeneration carriage motor power: 0.37kW, regeneration carriage travel speed: 6m/min, length: 4500mm, width: 2700mm, height: 6615mm, weight: 4.4t, including documentation. An on-site inspection is possible.

Suction Unit

Esta MOBEX P-24 H

Germany

2021

used

on request

INNO32594

Motor power: 3kW, protection rating: IP54, max. air flow rate: 2800m³/h, number of filter elements: 2, filter area: 24m², dimensions: 1910mmx1040mmx2200mm, weight: 350kg. The machine was inspected by ESTA in 2021. Inspection by appointment possible.

Grating Mill

Germany

unknown

used

on request

INNO32544

Drum diameter: 600mm, max. rotational speed: 1,500rpm, connected load: 30kW, made of stainless steel, movable on a steel frame, equipped with INDUR screens and HEW RF 10L/2 electric motor, manufacturer unknown, suitable for food products and spices.

Continuous Mixer

Diam 250

Germany

unknown

used

on request

INNO32543

Max. throughput capacity: 15t/h, max. liquid addition: 3%, motor power: 7.5kW, stainless steel construction, like-new condition. On-site inspection is possible.

Vertical Continuous Mixer

Hosokawa Flexomix 160

Germany

unknown

used

on request

INNO32542

Three Hosokawa Flexomix 160 agglomerators are available, on-site inspection is possible, machines are not connected to power.

Temperature Test Chamber

Weiss Technik KWP 120/70

Germany

2003

used

on request

INNO32530

Temperature range: -60 to 130°C, the control system is defective, including documentation and wiring diagrams, on-site inspection is possible.

Laminar Flow Module

Spetec FMS 75

Germany

2023

used

on request

INNO32528

Filter dimensions: 1,220x610mm, air flow rate: 1,550m³/h, cleanroom class: ISO 5 (high-purity working environment), high-efficiency filter: H14 (99.995% filtration efficiency), connected load: 510W, length: 977mm, width: 453mm, height: 374.5mm, weight: 30kg, equipped with EC fan, 8-stage adjustable air flow, regularly maintained, last successfully certified on March 1, 2023, in perfect working condition, ready for immediate operation, no outstanding maintenance, on-site inspection is possible.

Ammonia Evaporator System

Hkl Anlagentechnik

Germany

unknown

used

on request

INNO32479

Control panel: Siemens SIMATIC PANEL, equipment: evaporator units, valves, process connections, fittings, valve, pressure control and measuring section, pressure gauges, pneumatic shut-off valves, solenoid valves, pressure regulators and additional components, an on-site inspection is possible.

Suction Unit

Keller Air-Shoc A40/12-A

Germany

2015

used

on request

INNO32462

A Keller extraction system in need of repair is offered for sale. Extraction capacity: 7500m³/h, negative pressure: 250daPa, extraction ductwork: DN355/DN400, exhaust stack: DN560 including silencer, fan type: MAE 025-012530-00, shaft power: 6.89kW, speed: 2915rpm. A service check including inspection of the filter elements and air-flow measurements was carried out in 2024. This revealed increased differential pressure across the filter cartridges, leaks and insufficient air flow. Including wall bracket. Documentation available. An on-site inspection is possible.

High-Temperature Centrifugal Fan

Evg Lufttechnik RVS5-RU-71-R-RD90-V

Germany

2022

used

on request

INNO32406

A new, unused EVG Lufttechnik high-temperature centrifugal fan is offered. Volume flow: 245m³/h, max. speed: 5270rpm, max. medium temperature: 500°C, total pressure difference: up to 6172Pa, motor power: 1.5kW, voltage: 230/400V, efficiency class: IE3, degree of protection: IP55, weight: approx. 165kg. With Motovario electric motor and V-belt drive. Documentation fully available.

Suction Unit

Fgc / Filtration Group LGA 601 FUW 1,5kW

Germany

2020

used

on request

INNO32294

An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible.

Stirring Tanks

4 m³

Germany

unknown

used

on request

INNO32253

A mixing tank with propeller agitator is offered. Volume: approx. 4000l, internal height: approx. 2000mm, internal diameter: approx. 1650mm, internal material: acid- and alkali-resistant plastic, outer shell: GRP. Equipped with mixing system: variable-speed propeller agitator, manhole, air-operated diaphragm pump for product feed, bottom drain, extraction system and working platform. An on-site inspection is possible.

Coolant Treatment System

Zyklomat ZKR 14/350

Germany

2016

used

on request

INNO32221

1) Zyklomat coolant cleaning system, application: cleaning of grinding emulsion, cleaning capacity: 350l/min, recirculation clean tank-dirty tank: 100-350l/min, max. machine supply: 250l/min, supply pressure: 3.5bar, filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3, separation limit: approx. 5µm, medium: emulsion 3-6%, max. medium temperature: 50°C, solid particles: brass particles, max. solids quantity: 15kg/h, total volume: 5.14m³, operating volume: 3.6-4.58m³, process: fully automatic full-flow filtration, sludge discharge: fully automatic, with non-flowing consistency, 2) double scraper tank for grinding sludge KR 1.75-5.1, total volume: 5.14m³, max. volume: 4.58m³, length: 4,000mm, including 70mm reinforcement, width: 1,890mm, including 140mm reinforcement, height: 1,105mm, including 100mm base profile, neck height: 2,300mm, max. theoretical discharge capacity: 15kg/h, function: coolant storage tank with integrated clean tank, sedimentation and flotation tank with fully automatic sludge discharge, serviced annually, fully functional, no known defects, with documentation. An on-site inspection is possible.

Vertical Pressure Leaf Filter

Amafilter 30V-95S-36

Germany

1994

used

on request

INNO32218

Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement.

Mixing Vessel

Tankbau Weilheim Gmbh 110-61-615

Germany

1984

used

on request

INNO32088

Maximum volume Chamber I/Chamber II: 580/173 l, maximum permissible operating temperature Chamber I and Chamber II: 80°C, maximum permissible operating overpressure Chamber II: 2 bar. An on-site inspection is possible.

Mixing Vessel

Asca Metallwarenfabrik

Germany

1994

used

on request

INNO32086

Inner/ outer vessel capacity: 1370/ 170l, maximum permissible operating temperature of the inner and outer vessels: 60°C, maximum permissible operating overpressure of the outer vessel: 3bar. An on-site inspection is possible.

Mixing Vessel

Freude Titan Gmbh

Germany

2016

used

on request

INNO32085

Volume Chamber I/ Chamber II: 2970/ 378l, maximum permissible operating pressure Chamber I/ Chamber II: 0/ 3.0bar, maximum permissible operating temperature Chamber I and Chamber II: 100°C, test pressure Chamber I/ Chamber II: 0/ 4.5bar. An on-site inspection is possible.