▷ Used automation technology from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

All Offers / Automation technology

Assembly systems 4 Manipulators 6 Other machinery 11 Placement technology 38 Positioning systems 1 Sorting device 3 Steerings 3 Switchgears and controlgears 1

Innovac used-machines

Automation technology [1 - 20 of 67]

Handload Selective Soldering System

Pillarhouse Usa Inc. JADE S-200 MKII

Germany

2009

used

on request

INNO32741

Max. PCB dimensions: 457x508mm, edge clearance top/bottom: 3mm, component clearance top: 90mm, bottom: 40mm, extended component clearance top: 190mm, supported applicators: AP nozzle diameter (standard): 2.5-16mm, extended AP nozzle diameter: 2.5-20mm, micro nozzle diameter: 1.5-2.5mm, jet tip nozzle diameter: 6-20mm, max. jet wave nozzle width: 25mm, height without signal tower: 1403mm, length: 1351mm, width: 1000mm. Equipment: manual loading, Drop Jet Fluxer with Dual Control System, titanium solder pot for up to 10kg of solder, motor control for X-, Y- and Z-axes, automatic solder replenishment (solder wire) and solder wave height detection, teach-in camera, Top-Side Preheat (upper heating with 4 segments, closed-loop temperature control), process camera, automatic solder feeding with solder level detection, Auto Fiducial System, Pillarpad offline programming software, machine refurbished in 2022, software upgraded to Windows 10 and new PH software. With PILLARHOUSE PILLARGEN-40 nitrogen generator, year of manufacture: 2022, 40l/min at 50ppm residual oxygen, with communication interface to the soldering system, air drying module and oil separator. An on-site inspection is possible.

Cut and Strip Machine

Makfil System ANDROMEDA 2001

Germany

1993

used

on request

INNO22068

Automatic cut and strip machine designed to process various types of wire.

Separator System

Schunk SAR-1300-B+D-Universal

Germany

2008

used

on request

INNO32709

Control system: Beckhoff, operation: touchscreen. Equipment: extraction system, milling and sawing separation, shuttle/loading system, enclosed machining area, safety enclosure with viewing windows, emergency stop switch, start/stop push buttons, three-color signal tower, pneumatic air preparation unit, Ruwac industrial vacuum cleaner. The system is operational and was shut down at the beginning of the year. Inspection possible by arrangement.

Semi-Automatic Stencil Printer

Ekra S55 M0PS

Germany

1995

used

on request

INNO32695

Max. PCB dimensions: 50-460x50-460mm, stencil frame dimensions: 584x584mm, alignment accuracy (MOPS): ±20µm, visual inspection: dual-camera system with monitor (fiducial teaching), supply connections: 230V AC/50Hz, compressed air connection: 6bar, weight: 525kg, an on-site inspection is possible.

SMT Scanning and Handling System

Asys ARS 02

Germany

2011

used

on request

INNO32680

Rated voltage: 230V AC, frequency: 50Hz, rated current: 6.3A, control voltage: 24V DC, compressed air supply: 5bar, compressed air consumption: 5Nl/min, connected load: 0.34kW, length: 790mm, width: 950mm, height: 1270mm, weight: 135kg. An on-site inspection is possible.

SMT Scanning and Handling System

Asys ARS 02

Germany

2007

used

on request

INNO32679

Rated voltage: 230V AC, frequency: 50Hz, rated current: 6.3A, control voltage: 24V DC, compressed air supply: 5bar, compressed air consumption: 5Nl/min, connected load: 0.34kW, length: 790mm, width: 950mm, height: 1270mm, weight: 135kg. An on-site inspection is possible.

SMD Placement Machine

Asm Assembly Systems Gmbh & Co. Kg SIPLACE SX1/ SX2

Germany

2012

used

on request

INNO32678

Software version: 717 R23-1, mains voltage: 3x400V, rated current: 7.5A per phase, fuse protection: 3x16A, compressed air supply: 5-10bar, compressed air consumption: 600Nl/min, operation: SIPLACE user interface with monitor, connected load: 2.5kW, length: 1500mm, width: 2475mm, height: 2030mm, weight: 2.31t, without setup tables and component feeders, with CE marking. An on-site inspection is possible.

$Continuous-Fully-Automatic-Melt-Filter-Gneuß-RF7\250\M-genius used$

Continuous Fully Automatic Melt Filter

Gneuß RF7\250\M genius

Germany

2016

used

on request

INNO32534

Polymer/plastic type: mixed-color PP, process temperature: 250°C, viscosity at Tm: MFR 10-60, stroke: 30-120mm, end product: granules, throughput capacity: 1,200kg/h, filter fineness: 56, 75, 100 and 200μm, max. operating pressure: 200bar, including documentation. On-site inspection is possible, machine not connected to power.

PV Cell Stringer

Wuxi Autowell Technology ATW / MS30A-S

Germany

2018

used

on request

INNO32382

Configuration: Single Track Multi Busbar, voltage: 380VAC 3P/N/PE/50Hz, power: 15kW, compressed air: 0.6MPa, machine dimensions X/Y/Z: approx. 7000mm/2050mm/2370mm. The stringer is currently retrofitted for TECC-Connect and can be converted back to the soldering process. The machine is fully functional and ready for operation. Documentation available. Inspection possible by arrangement.

CNC PCB Drilling and Routing Machines

Pluritec / Lenz Multistation V3/G650-4/GX-460/2/DLG 550-2 AL

Germany

2001

used

on request

INNO32351

Four CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 3) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 4) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible.

Flying Probe PCB Test System

Emma ELX 6146

Germany

2004

used

on request

INNO32349

Two Emma flying probe PCB testers are available. 1) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2004. 2) Emma ELX 6146 flying probe PCB tester, year of manufacture: 2002. An on-site inspection is possible.

Selective Soldering System

Atf 35/25

Germany

2012

used

on request

INNO32262

A Atf selective soldering system in need of repair is offered. Process area: 350x250mm, extraction capacity: 200m³/h, power/capacity: 400V 50/60Hz. Machine dimensions X/Y/Z: approx. 1560mm/1375mm/1060mm, weight: approx. 380kg without solder. With spray fluxer, temperature sensor and nitrogen equipment. The Z-axis loses its reference position after repeated operation. Inspection by appointment is possible.

Pick-and-Place Line

Juki KE-3020/ FX3

Germany

unknown

used

on request

INNO32255

The line consists of one Juki KE-3020L pick-and-place machine, one Juki FX-3 pick-and-place machine, one Kurtz Ersa HOTFLOW 2/12 reflow soldering oven and one Kurtz Ersa stencil printer, 1) Juki KE-3020L pick-and-place machine, 2) Juki FX-3 pick-and-place machine, placement speed - optimum: 0.049s/chip (74,000CPH), placement speed - IPC9850: 60,000CPH, component size: 0402 (01005) to 33.5mm (or diagonal length up to 47mm), placement accuracy: +/-0.05mm (Cpk ≥ 1), max. feeder inputs: 120 with 8mm tape feeders, max. PCB size: 50-410x50-360mm, length: 1650mm, width: 2650mm, height: 1530mm, weight: 3.28t, 3) Kurtz Ersa HOTFLOW 2/12 reflow soldering oven, conveyor system working width: 50-500mm, working width with PCB center support: 60-500mm, PCB clearance: +35/-20mm, conveyor speed: 20-200cm/min, conveyor height above floor: 820-950mm, pin and chain conveyor: 5mm edge clearance, cooling zone: water recooling system, 2 upper cooling modules, cooling medium: water / air, ambient temperature: 10-35°C, process length: 2450mm, heating zone: 1650mm, cooling zone: 800mm, inlet zone: 700mm, outlet zone: 700mm, process chamber width: 700mm, length: 3890mm, width: 1390mm, height: 1370-1500mm, weight: 1.4t, 4) Kurtz Ersa stencil printer. An on-site inspection is possible.

Pick-and-Place Line

Juki KE-2070/ KE-2080

Germany

unknown

used

on request

INNO32252

The line consists of one Juki KE-2070 pick-and-place machine, one Juki KE-2080 pick-and-place machine, one Juki RS-800 reflow soldering oven and a cooling unit (chiller), 1) Juki KE-2070 pick-and-place machine, permissible component height SC: 6mm, NC: 12mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 2) Juki KE-2080 pick-and-place machine, permissible component height NC: 12mm, HC: 20mm, EC: 25mm, PCB dimensions Medium: 330x250mm, Large: 410x360mm, Extra Large: 510x460mm, transport direction: right-to-left or left-to-right, transport height: 900mm +/-20mm, 950mm +/-20mm, 3) Juki RS-800 8-zone reflow soldering oven, number of heating zones: top 8, bottom 8, heating zone length: 3121mm, number of cooling zones: top 2, cooling zone length: 800mm, exhaust air volume: 10m³/min x2 exhaust connections, heat-up time: approx. 25min, temperature setting range: room temperature to 300°C, temperature control: closed-loop PID control + SSR, PCB width: 50-450mm, transport height: 950mm +/-20mm, transport speed: 300-2000mm/min, chain lubrication: automatic lubrication, cooling method: forced-air cooling, connected load: 64kW, power consumption during start-up: approx. 35kW, power consumption during normal operation: approx. 8.5kW, length: 5314mm, width: 1417mm, height: 1524mm, weight: 2.25t, 4) Cooling unit (chiller). An on-site inspection is possible.

Stencil Printer

Ekra X5-Prof

Germany

2011

used

on request

INNO32149

Offered is a fully automatic EKRA screen and stencil printing system. Max. print format X/Y: 508mm/508mm, min. print format X/Y: 80mm/50mm, max. frame size X/Y: 740mm/740mm, substrate thickness range: 0.5mm-6mm, max. squeegee speed: 200mm/s, squeegee pressure range: 10N-250N, repeatability: +/-12.5µm, 6 Sigma, cycle time: 8s + printing time. Including solder paste height inspection, 2.5D SPI and fixtures for VarioGrid support bars as well as iPAG dispensing system. The machine was serviced in April 2025. Machine dimensions X/Y/Z: approx. 1140mm/1866mm/1503mm, weight: 980kg. Documentation available. Inspection possible by appointment.

Etching Machine

Pill Export 650

Germany

2009

used

on request

INNO32026

Industrial Pill etching machine from a printed circuit board manufacturing facility. Process stages: infeed section, etching chamber, replenisher, 4-stage cascade rinse, drying and outfeed section, max. working width: 650mm, PCB thickness: 0.1mm-3.2mm, conveyor speed: 0.5m/min-5.0m/min, max. process temperature: 55°C. Including a magnetic centrifugal pump for the etching chamber, one tank X/Y: 3500mm/2200mm and one Lantronic stacker. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1300mm. An on-site inspection is possible.

Etching machine

Pill Export 550

Germany

1989

used

on request

INNO32025

An industrial etching machine from a printed circuit board manufacturing facility for the alkaline development of photoresists is offered. Process sequence: infeed, etch chamber, replenisher, 3-stage rinse, drying and outfeed, max. working width: 550mm, printed circuit board thickness range: 0.2mm-4.0mm, conveyor speed: 0.4m/min-2.5m/min. Including a Nubal unstacker, a drip tray X/Y: 3900mm/1600mm and a 200l dosing unit with agitator. Machine dimensions X/Y/Z: approx. 4000mm/1300mm/1400mm. An on-site inspection is possible.

Etching Machine

Pill Export 650

Germany

2008

used

on request

INNO32024

An industrial Pill micro-etching machine for the micro-etching of printed circuit boards (PCBs) from a PCB manufacturing facility. is offered. Process steps: infeed, micro-etching, rinsing, drying and outfeed, max. working width: 650mm, PCB thickness range: 0.1mm-3.2mm, feed speed: 0.5m/min-3.5m/min, machine dimensions X/Y/Z: approx. 2600mm/1400mm/1300mm. Including a Dataco stacking unit. Documentation available. On-site inspection is possible.

CNC PCB Drilling And Routing Machine

Lenz

Germany

1995

used

on request

INNO32016

4 Lenz CNC PCB drilling and routing machines are offered. 1) One CNC vertical PCB drilling and routing machine, Lenz LGX 460-2AL, year of manufacture: 1995, travel X/Y: approx. 550mm/460mm, rapid traverse X/Y: approx. 40m/min, max. drilling rate Z-axis: approx. 500strokes/min, spindles: Precise SC53H, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 308, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit and a loader. Overall dimensions of the base machine X/Y/Z: approx. 1650mm/1700mm/2250mm, additional length of the loader unit: approx. 820mm. 2) One CNC vertical PCB drilling and routing machine, Lenz GX 460-2, year of manufacture: 1989, travel X/Y: approx. 550mm/460mm, number of spindles: 2, rapid traverse X/Y: approx. 15m/min, max. stack height Z-axis: approx. 10mm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 45.00, equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2100mm/1450mm/1800mm. 3) One CNC vertical PCB drilling and routing machine, Lenz GX 600-1, year of manufacture: 1991, travel X/Y: approx. 650mm/600mm, number of spindles: 1, rapid traverse X/Y: approx. 15m/min, spindle: Precise SC63, spindle speed: approx. 20000rpm, tool holder: 3mm, tool capacity: 88, control: SIEB & MEYER CNC 44.00. Equipped with a cooling unit, overall dimensions X/Y/Z: approx. 2000mm/1500mm/1800mm. 4) One compact CNC vertical PCB drilling and routing machine, Lenz TB 500-1, travel X/Y: approx. 475mm/390mm, number of spindles: 1, rapid traverse X/Y: approx. 10m/min, spindle speed: approx. 15000rpm, tool holder: 3mm, control: SIEB & MEYER CNC 35.00. Equipped with a cooling unit and a spare control unit, overall dimensions X/Y/Z: approx. 1500mm/1100mm/1520mm. The machines can be purchased individually or as a package. Inspection possible by appointment.

Vapour Phase Soldering System

Ibl SLC504

Germany

2005

used

on request

INNO31857

A vapor phase soldering system IBL is offered for processing SMT printed circuit boards and electronic assemblies. Soldering format X/Y: approx. 530mm/330mm, max. printed circuit board format: 540mm/307mm/50mm, medium filling: approx. 15kg, water connection: 1/2 inch, min./max. water pressure: approx. 2.5bar/4bar. Dimensions: approx. 1190mm/1760mm/1320mm, weight: approx. 500kg. Inspection by appointment possible.