▷ Used food processing machines from Germany | innovac.de

Innovac GmbH Used machines from Germany

i.e. Machining Center MORI SEIKI

Innovac used-machines

Food processing machines, Beverage [1 - 20 of 146]

Rehumidification-Instantizing Plant

Niro Atomizer Kopenhagen F10 ABC06

Germany

1970

used

on request

INNO31714

Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible.

Evaporative Cooler

Werner & Pfleiderer Aroma + Cooler AC

Germany

2009

used

on request

INNO31660

A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible.

Meat Processing Conveyor

Westerhoff 10-Personen

Germany

2020

used

on request

INNO31647

A poultry cone cutting line from Westerhoff Geflügeltechnik GmbH is available. Number of operators: 10, cutting cones: 40, max. throughput capacity: 1000pcs/h, length: approx. 11000mm, width: approx. 2000mm. Including a platform for the operators. An on-site inspection is possible.

Cheese Maker

Ruchti Tec

Germany

unknown

used

on request

INNO31523

Equipment: open design, standing on 3 feet, insulated, jacket can be heated and cooled, copper inner coating, stirring/cutting unit, various connections in the jacket for hot water/ice water, outlet connection nominal diameter DN 65 reduced to nominal diameter DN 25, capacity: 1200l, outer diameter: 1770mm, inner diameter: 1600mm, height with agitator: 1550mm, tank height: 1000mm. An on-site inspection is possible.

Cleaning Machine

Jeros 8120-00

Germany

unknown

used

on request

INNO31521

Water connection: 1/2 inch RG, water pressure: 0.7-6bar, water connection temperature: 50°C, drain diameter: 40mm, wash tank capacity: 95l, wash water temperature: 60°C, wash pump power: 2kW, wash pump capacity: 600l/min, wash pressure in the nozzles: 1.4bar, rinse tank capacity: 13l, rinse water temperature: 85°C, rinse pump power: 0.37kW, rinse pump capacity: 350l/min, rinse pressure in nozzles with rinse pump: 0.8bar, wash programs: 2, 4 and 6min, washing volume: 635x690x610mm, noise level: 70dB(A), water consumption per wash cycle: approx. 6l, heating element power: 2x 6kW + 1x 4.5kW, fuse protection: 32A, working height: 906mm, internal opening dimension: 508.5mm, length: 1265mm, width: 805mm, height opened: 2030mm, net weight without water: 225kg, gross weight without water: 250kg. An on-site inspection is possible, without power.

Automatic Mincer

Seydelmann AE130/3-B

Germany

1999

used

on request

INNO31420

Hopper capacity: 300l, perforated disc diameter: 130mm, throughput capacity: 3500kg/h, connected load: 22kW, length: 2850mm, width: 1500mm, height: 3050mm, weight: 980kg, weight with loading: 1300kg. An inspection on site is possible.

Rolling Mill

Bauermeister

Germany

unknown

used

on request

INNO31405

A granite three-roll mill, presumably made by Bauermeister, which was used for marzipan, is available. On-site inspection is possible.

Carbonation Plant

Jakü PM-0-I-100

Germany

2017

used

on request

INNO31319

A Jakü deaeration and CO2 impregnation system is available. Nominal capacity: 10000l/h, water inlet pressure range: 3bar-4.5bar, CO2 inlet pressure range: 8bar-10bar, nozzles: 3, nozzle fineness: medium/fine/very fine. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, empty weight: approx. 800kg, operating weight: approx. 1400kg. Documentation available. An on-site inspection is possible.

Hard Candy Molding Machine

Makat HCG 530

Germany

2005

used

on request

INNO31264

A Makat depositing and cooling line for hard candies is available. Working width: 530mm, mold cavity arrangement: 2 rows, cavities per row: 19, total cavities per mold: 38, max. stroke rate: 25/min, production capacity 4.5g: approx. 400kg/h, product weight: 2.5g/4.5g, total line dimensions X/Y/Z: approx. 10500mm/1500mm/2300mm. Documentation available. An on-site inspection is possible.

Dough Rolling Machine

Fritsch Rollfix 700/650

Germany

2011

used

on request

INNO31228

A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible.

Animal Feed Plant

Bühler/loos/jensen DPAB/DF

Germany

1979

used

on request

INNO31171

A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible.

Beverage Mixer

Famix 6000-2K

Germany

1993

used

on request

INNO31137

A two-component premix system H-Falterbaum (Famix) for the production of soft drinks from water and syrup with carbonation is available. Mixing capacity: 6000l/h, degassing: vacuum degassing, max. vessel pressure: 6.5bar, machine dimensions X/Y/Z: approx. 2500mm/1250mm/2500mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible.

Cutting Mixer

Krämer & Grebe Cutmix SM 325 Typ 173

Germany

1988

used

on request

INNO31135

A Krämer & Grebe rotary cutter is available. Bowl volume: 325l, knife speed: 3000rpm, knife peripheral speed: 120m/s, steam pressure: 2-4bar, steam temperature: 120°C-150°C, cooking temperature: 65°C-85°C, cooling temperature: 45°C-50°C, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2050mm, weight: approx. 4300kg. Including accessories such as knives, plastic parts and assembly wrench. The machine is dismantled and the control cabinet and the motor are located in the hall. An on-site inspection is possible.

Homogenizer

Gea NS3110H

Germany

2010

used

on request

INNO31123

A high-pressure homogenizer GEA is available. Stroke: 100mm, plunger diameter: 80mm, max. operating pressure: 200bar, throughput capacity: approx. 14000l/h, max. product temperature: 90°C, max. process temperature cleaning/sterilization: 140°C, machine dimensions X/Y/Z: approx. 2250mm/1600mm/1600mm, weight: approx. 3500kg. Including control cabinet and spare parts. The unit has new gearboxes. Documentation available. An on-site inspection is possible.

Cheese Mixer

Rühle MGR 400

Germany

2013

used

on request

INNO31120

A scarcely used Rühle cooling vacuum tumbler with mixing, marinating and tumbling function is available. Container volume: 400l, max. filling volume: 300l, refrigerant: R404A, refrigerant quantity: 760g, mixer arm speed: 25rpm, polter arm speed: 25rpm, lifting aid load capacity: 300kg. Machine dimensions X/Y/Z: approx. 2100mm/2650mm/2700mm, weight: approx. 1400kg, operating hours: 7540h, mixing hours: 553h. Documentation available. An on-site inspection is possible.

Cheese-cutting Machine

Weber SLC 602-333

Germany

2003

used

on request

INNO31118

A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

Heat Exchanger

Alfa Laval E 110/E 210

Germany

2009

used

on request

INNO31046

A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible.

Ultrasonic Compact Cutting Machine

Bakon CompactSlicer Ultrasonic

Germany

2018

used

on request

INNO31012

An ultrasonic cutting machine is offered. 180mm full-wave titanium blade, cutting shapes: rectangular, triangular, diamond-shaped, round products, sheet dimensions X/Y: min. 300mm/200mm max. 600mm/400mm, round products: min. 220mm max. 260mm, cutting height max.: 120mm, production capacity: approx. 120sheets/h, integrated cleaning station and drying function. Inspection possible by appointment.

Spice Mixer

Kerner KMM 2000/3,1

Germany

unknown

used

on request

INNO30990

A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible.

Boiling Vessel

Steiner HK 300L

Germany

2009

used

on request

INNO30960

Two identical cooking kettles Steiner are available. Years of manufacture: 2009/2010, Volume: 300l, Heating type: steam, Max. steam pressure: 10bar, Kettle diameter: approx. 1000mm, Kettle depth: approx. 500mm, Machine dimensions X/Y/Z: approx. 1950mm/1200mm/1200mm, Weight: approx. 200kg. Documentation available. An on-site inspection is possible.